From: Kan Liang <[email protected]> The counters on M3UPI Link 0 and Link 3 don't count. Writing 0 to these counters may causes system crash on some machines.
The PCI BDF addresses of M3UPI in current code are incorrect. The correct addresses should be D18:F1 0x204D D18:F2 0x204E D18:F5 0x204D Signed-off-by: Kan Liang <[email protected]> --- arch/x86/events/intel/uncore_snbep.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c index 51d7c11..3b3fc92 100644 --- a/arch/x86/events/intel/uncore_snbep.c +++ b/arch/x86/events/intel/uncore_snbep.c @@ -3931,16 +3931,16 @@ static const struct pci_device_id skx_uncore_pci_ids[] = { .driver_data = UNCORE_PCI_DEV_FULL_DATA(21, 5, SKX_PCI_UNCORE_M2PCIE, 3), }, { /* M3UPI0 Link 0 */ - PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204C), - .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 0, SKX_PCI_UNCORE_M3UPI, 0), + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D), + .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 1, SKX_PCI_UNCORE_M3UPI, 0), }, { /* M3UPI0 Link 1 */ - PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D), - .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 1, SKX_PCI_UNCORE_M3UPI, 1), + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204E), + .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 2, SKX_PCI_UNCORE_M3UPI, 1), }, { /* M3UPI1 Link 2 */ - PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204C), - .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 4, SKX_PCI_UNCORE_M3UPI, 2), + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D), + .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 5, SKX_PCI_UNCORE_M3UPI, 2), }, { /* end: all zeroes */ } }; -- 2.7.4
