On Thu, Aug 02, 2018 at 12:34:21PM +0200, Oleksij Rempel wrote: > One of the Freescale recommended sequences for power off with external > PMIC is the following: > ... > 3. SoC is programming PMIC for power off when standby is asserted. > 4. In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies. > > See: > http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf > page 5083 > > This patch implements step 4. of this sequence. > > Signed-off-by: Oleksij Rempel <[email protected]>
Applied, thanks.
