The thermal zone uses spmi-temp-alarm as sensor. The trip points correspond to stage 1 and 2 temperatures. Stage 2 shutdown is disabled, instead the stage 2 temperature is configured as critical trip point to allow for an ordely shutdown.
Without an IIO input the sensor only reports a limited number of temperatures: - 37°C for temperatures below 105°C - 107°C for temperatures >= 105°C and < 125°C - 127°C for temperatures >= 125°C Signed-off-by: Matthias Kaehlcke <[email protected]> --- Changes in v4: - updated trip point temperatures to match stage 1 and 2 ones - disabled stage 2 shutdown - updated commit message Changes in v3: - moved 'thermal-zones' node to the beginning of the .dtsi Changes in v2: - defined 'thermal-zones' node in pm8998.dtsi instead of using a label to refer to it - use 105°C hardware trip point as critical trip point - reduced number of trip points to 2 - lowered temperature of passive trip point - updated trip point names and added labels - updated commit message --- arch/arm64/boot/dts/qcom/pm8998.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 7eea94701b23..3bb179b85a44 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -3,6 +3,31 @@ #include <dt-bindings/spmi/spmi.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + thermal-zones { + pm8998 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8998_temp>; + + trips { + pm8998_alert0: pm8998-alert0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + pm8998_crit: pm8998-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { pm8998_lsid0: pmic@0 { @@ -15,6 +40,7 @@ compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + stage2-shutdown-disabled; #thermal-sensor-cells = <0>; }; -- 2.18.0.203.gfac676dfb9-goog
