[PATCH 1/3] ASoC: tlv320dac33: Use gpio_is_valid()

[Arvind Yadav]

Replace the manual validity checks for the GPIO with the
gpio_is_valid().

Signed-off-by: Arvind Yadav <arvind.yadav...@gmail.com>
---
 sound/soc/codecs/tlv320dac33.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index a957eae..c23b9db 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -397,13 +397,13 @@ static int dac33_hard_power(struct snd_soc_component 
*component, int power)
                                goto exit;
                }
 
-               if (dac33->power_gpio >= 0)
+               if (gpio_is_valid(dac33->power_gpio))
                        gpio_set_value(dac33->power_gpio, 1);
 
                dac33->chip_power = 1;
        } else {
                dac33_soft_power(component, 0);
-               if (dac33->power_gpio >= 0)
+               if (gpio_is_valid(dac33->power_gpio))
                        gpio_set_value(dac33->power_gpio, 0);
 
                ret = regulator_bulk_disable(ARRAY_SIZE(dac33->supplies),
@@ -1519,7 +1519,7 @@ static int dac33_i2c_probe(struct i2c_client *client,
        dac33->fifo_mode = DAC33_FIFO_BYPASS;
 
        /* Check if the reset GPIO number is valid and request it */
-       if (dac33->power_gpio >= 0) {
+       if (gpio_is_valid(dac33->power_gpio)) {
                ret = gpio_request(dac33->power_gpio, "tlv320dac33 reset");
                if (ret < 0) {
                        dev_err(&client->dev,
@@ -1548,7 +1548,7 @@ static int dac33_i2c_probe(struct i2c_client *client,
 
        return ret;
 err_get:
-       if (dac33->power_gpio >= 0)
+       if (gpio_is_valid(dac33->power_gpio))
                gpio_free(dac33->power_gpio);
 err_gpio:
        return ret;
@@ -1561,7 +1561,7 @@ static int dac33_i2c_remove(struct i2c_client *client)
        if (unlikely(dac33->chip_power))
                dac33_hard_power(dac33->component, 0);
 
-       if (dac33->power_gpio >= 0)
+       if (gpio_is_valid(dac33->power_gpio))
                gpio_free(dac33->power_gpio);
 
        return 0;
-- 
1.9.1