On Sat, Feb 17, 2018 at 10:57:01PM +0200, Andy Shevchenko wrote:
> On Sat, 2018-02-17 at 17:58 +0100, Dominik Brodowski wrote:
> > On Sat, Feb 17, 2018 at 05:09:40PM +0200, Andy Shevchenko wrote:
>
> > This patch fixes the issue, thanks.
>
> I will send it soon out.
>
> > Do you still need the DEBUG_GPIO output?
>
> It would be nice to have, though if it makes difficulties to you, then
> don't bother.
Note that I have to enable CONFIG_GPIOLIB before I can enable DEBUG_GPIO;
CONFIG_PINCTRL was off as well. Maybe some "SELECT" is missing for
CONFIG_I2C_DESIGNWARE_BAYTRAIL ?
The following output is with your patch applied. Do you need it without
your fixup patch as well?
$ dmesg | egrep -i "(gpio|pinctrl|i2c|broadw)"
[ 0.591578] calling dw_i2c_init_driver+0x0/0x13 @ 1
[ 0.625040] i2c_designware INT3432:00: GPIO lookup for consumer scl
[ 0.625073] i2c_designware INT3432:00: using ACPI for GPIO lookup
[ 0.625102] acpi INT3432:00: GPIO: looking up scl-gpios
[ 0.625129] acpi INT3432:00: GPIO: looking up scl-gpio
[ 0.625154] i2c_designware INT3432:00: using lookup tables for GPIO lookup
[ 0.625202] i2c_designware INT3432:00: lookup for GPIO scl failed
[ 0.678297] i2c_designware INT3433:00: GPIO lookup for consumer scl
[ 0.678326] i2c_designware INT3433:00: using ACPI for GPIO lookup
[ 0.678353] acpi INT3433:00: GPIO: looking up scl-gpios
[ 0.678376] acpi INT3433:00: GPIO: looking up scl-gpio
[ 0.678398] i2c_designware INT3433:00: using lookup tables for GPIO lookup
[ 0.678427] i2c_designware INT3433:00: lookup for GPIO scl failed
[ 0.701403] initcall dw_i2c_init_driver+0x0/0x13 returned 0 after 107421
usecs
[ 1.711543] calling gpio_clk_driver_init+0x0/0x13 @ 1
[ 1.712419] initcall gpio_clk_driver_init+0x0/0x13 returned 0 after 44 usecs
[ 1.933569] calling synaptics_i2c_driver_init+0x0/0x13 @ 1
[ 1.933602] initcall synaptics_i2c_driver_init+0x0/0x13 returned 0 after 30
usecs
[ 1.933996] calling rmi_i2c_driver_init+0x0/0x13 @ 1
[ 1.934060] initcall rmi_i2c_driver_init+0x0/0x13 returned 0 after 59 usecs
[ 1.935852] calling i2c_i801_init+0x0/0xc9 @ 1
[ 1.957452] initcall i2c_i801_init+0x0/0xc9 returned 0 after 21089 usecs
[ 1.977716] calling i2c_hid_driver_init+0x0/0x13 @ 1
[ 2.025330] input: DLL0665:01 06CB:76AD Touchpad as
/devices/pci0000:00/INT3433:00/i2c-1/i2c-DLL0665:01/0018:06CB:76AD.0001/input/input9
[ 2.025853] hid-multitouch 0018:06CB:76AD.0001: input: I2C HID v1.00 Mouse
[DLL0665:01 06CB:76AD] on i2c-DLL0665:01
[ 2.026376] initcall i2c_hid_driver_init+0x0/0x13 returned 0 after 47514
usecs
[ 2.065027] calling max98090_i2c_driver_init+0x0/0x13 @ 1
[ 2.065075] initcall max98090_i2c_driver_init+0x0/0x13 returned 0 after 44
usecs
[ 2.065077] calling rt286_i2c_driver_init+0x0/0x13 @ 1
[ 2.118805] initcall rt286_i2c_driver_init+0x0/0x13 returned 0 after 52461
usecs
[ 2.118809] calling rt5640_i2c_driver_init+0x0/0x13 @ 1
[ 2.118853] initcall rt5640_i2c_driver_init+0x0/0x13 returned 0 after 38
usecs
[ 2.118856] calling rt5651_i2c_driver_init+0x0/0x13 @ 1
[ 2.118894] initcall rt5651_i2c_driver_init+0x0/0x13 returned 0 after 34
usecs
[ 2.165208] calling broadwell_audio_init+0x0/0x13 @ 1
[ 2.167941] broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> System
Pin mapping ok
[ 2.168171] broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> Offload0
Pin mapping ok
[ 2.168377] broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> Offload1
Pin mapping ok
[ 2.168575] broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> Loopback
Pin mapping ok
[ 2.170833] broadwell-audio broadwell-audio: rt286-aif1 <->
snd-soc-dummy-dai mapping ok
[ 2.179624] input: broadwell-rt286 Headset as
/devices/pci0000:00/INT3438:00/broadwell-audio/sound/card1/input15
[ 2.180363] initcall broadwell_audio_init+0x0/0x13 returned 0 after 14793
usecs
Thanks,
Dominik
