Hi Frank,
On Thu, Nov 02, 2017 at 07:59:04PM +0100, Frank Kunz wrote:
> > > +&mmc2 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&mmc2_pins_a>;
> > > + vmmc-supply = <®_vcc3v3>;
> >
> > What regulator is this connected to on the PMIC?
>
> Fixed, On the schematic it is finally connected to 3v0.Sorry, it wasn't really what I meant. Surely there's a PMIC regulator providing that 3.0V, you should put that regulator here. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
