Hi!, In my dmesg, I get:
[ 3.078688] usb 1-1.2.6: new full-speed USB device number 9 using ehci-pci [ 3.185101] usb 1-1.2.6: config 1 has an invalid interface number: 6 but max is 5 [ 3.185135] usb 1-1.2.6: config 1 has an invalid interface number: 7 but max is 5 [ 3.185143] usb 1-1.2.6: config 1 has no interface number 3 [ 3.185149] usb 1-1.2.6: config 1 has no interface number 5 [ 3.188716] usb 1-1.2.6: New USB device found, idVendor=1210, idProduct=0009 [ 3.188732] usb 1-1.2.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.188740] usb 1-1.2.6: Product: Lexicon Lambda [ 3.188744] usb 1-1.2.6: Manufacturer: Lexicon And then later: [ 7.132474] usb 1-1.2.6: 1:1: cannot get freq at ep 0x1 [ 7.140529] usb 1-1.2.6: 1:2: cannot get freq at ep 0x1 [ 7.149596] usb 1-1.2.6: 2:1: cannot get freq at ep 0x82 The device in question from lsusb: Bus 001 Device 009: ID 1210:0009 DigiTech The card lights up on boot, but then turns off again before the boot is complete. To get sound working, I have to unplug it and re-plug it. That's doable, but annoying. Above is sparse information, please ask for more. Thanks, Niels
