On Mon, Jul 31, 2017 at 12:04:11PM +0530, Varadarajan Narayanan wrote: > The phy outputs a clock that will act as the parent for > the phy's pipe clock. Add the name of this clock to the
s/phy/PHY/ > lane's DT node. > > Acked-by: Rob Herring <[email protected]> > Signed-off-by: Varadarajan Narayanan <[email protected]> > --- > Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > index e11c563..5d7a51f 100644 > --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > @@ -60,6 +60,8 @@ Required properties for child node: > one for each entry in clock-names. > - clock-names: Must contain following for pcie and usb qmp phys: > "pipe<lane-number>" for pipe clock specific to each lane. > + - clock-output-names: Name of the phy clock that will be the parent for > + the above pipe clock. s/phy/PHY/ (this file is a hodge-podge so I guess this isn't making it much worse) > > - resets: a list of phandles and reset controller specifier pairs, > one for each entry in reset-names. > @@ -96,6 +98,7 @@ Example: > > clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; > clock-names = "pipe0"; > + clock-output-names = "pcie_0_pipe_clk_src"; > resets = <&gcc GCC_PCIE_0_PHY_BCR>; > reset-names = "lane0"; > }; > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of > Code Aurora Forum, hosted by The Linux Foundation >
