Now that the pm8916 audio codec has support for jack detection, let the sound card driver use it.
Signed-off-by: Damien Riegel <[email protected]> --- sound/soc/qcom/apq8016_sbc.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/sound/soc/qcom/apq8016_sbc.c b/sound/soc/qcom/apq8016_sbc.c index d084d7468299..5f03f6249397 100644 --- a/sound/soc/qcom/apq8016_sbc.c +++ b/sound/soc/qcom/apq8016_sbc.c @@ -19,11 +19,14 @@ #include <linux/of.h> #include <linux/clk.h> #include <linux/platform_device.h> +#include <sound/jack.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <dt-bindings/sound/apq8016-lpass.h> +#include "../codecs/msm8916-wcd-analog.h" + struct apq8016_sbc_data { void __iomem *mic_iomux; void __iomem *spkr_iomux; @@ -35,13 +38,26 @@ struct apq8016_sbc_data { #define MIC_CTRL_TLMM_SCLK_EN BIT(1) #define SPKR_CTL_PRI_WS_SLAVE_SEL_11 (BIT(17) | BIT(16)) +static struct snd_soc_jack apq8016_jack; + static int apq8016_sbc_dai_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_dai *cpu_dai = rtd->cpu_dai; struct snd_soc_card *card = rtd->card; + struct snd_soc_codec *codec = rtd->codec; struct apq8016_sbc_data *pdata = snd_soc_card_get_drvdata(card); int rval = 0; + if (!apq8016_jack.jack) { + rval = snd_soc_card_jack_new(card, "headset", + SND_JACK_MECHANICAL, + &apq8016_jack, NULL, 0); + if (rval) + return rval; + + pm8916_wcd_analog_jack_detect(codec, &apq8016_jack); + } + switch (cpu_dai->id) { case MI2S_PRIMARY: writel(readl(pdata->spkr_iomux) | SPKR_CTL_PRI_WS_SLAVE_SEL_11, -- 2.13.3
