Hello Sir,
How is the review result of this patch. I am waiting for it be merged,
thanks.
BR
Ran
-----Original Message-----
From: Ran Wang [mailto:[email protected]]
Sent: Friday, June 02, 2017 10:30 AM
To: Rob Herring <[email protected]>; Mark Rutland <[email protected]>;
Catalin Marinas <[email protected]>; Will Deacon <[email protected]>
Cc: Shawn Guo <[email protected]>; Andy Tang <[email protected]>; Horia
Geantă <[email protected]>; Marc Zyngier <[email protected]>; Mihai
Emilian Bantea <[email protected]>; Jia Hongtao <[email protected]>; Scott
Wood <[email protected]>; Gang Liu <[email protected]>; york sun
<[email protected]>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
<[email protected]>; moderated list:ARM64 PORT (AARCH64 ARCHITECTURE)
<[email protected]>; open list
<[email protected]>; Ran Wang <[email protected]>
Subject: [PATCH] arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3
node
Add "dis_rxdet_inp3_quirk" boolean property to USB3 node. This property is used
to disable rx detection in P3 PHY mode.
Signed-off-by: Ran Wang <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index f4b8b7e..9137280 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -567,6 +567,7 @@
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
usb1: usb@3000000 {
@@ -575,6 +576,7 @@
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
usb2: usb@3100000 {
@@ -583,6 +585,7 @@
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
sata: sata@3200000 {
--
2.1.0.27.g96db324
