On 30.06.2017 15:57, Ludovic Desroches wrote:
> On Fri, Jun 30, 2017 at 03:38:22PM +0300, m18063 wrote:
>> Hi Ludovic,
>>
>> On 29.06.2017 17:58, Ludovic Desroches wrote:
>>> On Thu, Jun 29, 2017 at 02:44:33PM +0300, Claudiu Beznea wrote:
>>>> Add specific DTS file and bindings for sama5d27 SoM1 board.
>>>>
>>>> Signed-off-by: Claudiu Beznea <[email protected]>
>>>> Signed-off-by: Cristian Birsan <[email protected]>
>>>> ---
>>>> arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178
>>>> ++++++++++++++++++++++++++++++
>>>> 1 file changed, 178 insertions(+)
>>>> create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>>>>
>>>> diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>>>> b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>>>> new file mode 100644
>>>> index 0000000..b3af4d4
>>>> --- /dev/null
>>>> +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>>>> @@ -0,0 +1,178 @@
>>>> +/*
>>>> + * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
>>>> + *
>>>> + * Copyright (c) 2017, Microchip Technology Inc.
>>>> + * 2017 Cristian Birsan <[email protected]>
>>>> + * 2017 Claudiu Beznea <[email protected]>
>>>> + *
>>>> + * This file is dual-licensed: you can use it either under the terms
>>>> + * of the GPL or the X11 license, at your option. Note that this dual
>>>> + * licensing only applies to this file, and not this project as a
>>>> + * whole.
>>>> + *
>>>> + * a) This file is free software; you can redistribute it and/or
>>>> + * modify it under the terms of the GNU General Public License as
>>>> + * published by the Free Software Foundation; either version 2 of the
>>>> + * License, or (at your option) any later version.
>>>> + *
>>>> + * This file is distributed in the hope that it will be useful,
>>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>>> + * GNU General Public License for more details.
>>>> + *
>>>> + * Or, alternatively,
>>>> + *
>>>> + * b) Permission is hereby granted, free of charge, to any person
>>>> + * obtaining a copy of this software and associated documentation
>>>> + * files (the "Software"), to deal in the Software without
>>>> + * restriction, including without limitation the rights to use,
>>>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>>>> + * sell copies of the Software, and to permit persons to whom the
>>>> + * Software is furnished to do so, subject to the following
>>>> + * conditions:
>>>> + *
>>>> + * The above copyright notice and this permission notice shall be
>>>> + * included in all copies or substantial portions of the Software.
>>>> + *
>>>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>>>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>>>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>>>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>>>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>>>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>>>> + * OTHER DEALINGS IN THE SOFTWARE.
>>>> + */
>>>> +#include "sama5d2.dtsi"
>>>> +#include "sama5d2-pinfunc.h"
>>>> +
>>>> +/ {
>>>> + model = "Atmel SAMA5D27 SoM1";
>>>> + compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2",
>>>> "atmel,sama5";
>>>> +
>>>> + clocks {
>>>> + slow_xtal {
>>>> + clock-frequency = <32768>;
>>>> + };
>>>> +
>>>> + main_xtal {
>>>> + clock-frequency = <24000000>;
>>>> + };
>>>> + };
>>>> +
>>>> + ahb {
>>>> + apb {
>>>> + qspi1: spi@f0024000 {
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&pinctrl_qspi1_default>;
>>>> + flash@0 {
>>>> + #address-cells = <1>;
>>>> + #size-cells = <1>;
>>>> + compatible = "jedec,spi-nor";
>>>> + reg = <0>;
>>>> + spi-max-frequency = <83000000>;
>>>> + m25p,fast-read;
>>>> +
>>>> + at91bootstrap@00000000 {
>>>> + label = "at91bootstrap";
>>>> + reg = <0x00000000 0x00010000>;
>>>> + };
>>>> +
>>>> + bootloaderenv@00010000 {
>>>> + label = "bootloader env";
>>>> + reg = <0x00010000 0x00010000>;
>>>> + };
>>>> +
>>>> + bootloader@00020000 {
>>>> + label = "bootloader";
>>>> + reg = <0x00020000 0x00050000>;
>>>> + };
>>>> +
>>>> + dtb@00070000 {
>>>> + label = "device tree";
>>>> + reg = <0x00070000 0x00010000>;
>>>> + };
>>>> +
>>>> + kernel@00080000 {
>>>> + label = "kernel";
>>>> + reg = <0x00080000 0x00380000>;
>>>> + };
>>>
>>> I am wondering if it's a good idea to give the flash map here. If we
>>> take a kernel generated by a sama5_defconfig, it is about 3.8 MB.
>> The flash size here is 8MB. With kernel image of 3.8M, bootloader of 18KB,
>> u-boot of 2.2MB, dtb of 31K it will still fit.
>
> Right it can fit, I mean the description gives about 3.5 MB for the kernel so
> you can extend it.
You're right. It should be changed. I will do it in v2.
>
> Regards
>
> Ludovic
>
>>>
>>>> + };
>>>> + };
>>>> +
>>>> + macb0: ethernet@f8008000 {
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&pinctrl_macb0_default>;
>>>> + phy-mode = "rmii";
>>>> +
>>>> + ethernet-phy@1 {
>>>> + reg = <0x1>;
>>>> + interrupt-parent = <&pioA>;
>>>> + interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
>>>
>>> Are you sure about this value? pinctrl tells PD31 so 127. By the way, it
>>> is better to use macros: PIN_PD31.
>> Yes, here is a mistake. It has to be PIN_PD31. I will fix it in v2.
>>
>> Thank you,
>> Claudiu
>>>
>>> Regards
>>>
>>> Ludovic
>>>
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&pinctrl_macb0_phy_irq>;
>>>> + };
>>>> + };
>>>> +
>>>> + i2c0: i2c@f8028000 {
>>>> + dmas = <0>, <0>;
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&pinctrl_i2c0_default>;
>>>> + i2c-sda-hold-time-ns = <350>;
>>>> + status = "disabled";
>>>> +
>>>> + 24aa@50 {
>>>> + compatible = "24mac602";
>>>> + reg = <0x50>;
>>>> + pagesize = <8>;
>>>> + start-offset = /bits/ 8 <0xf8>;
>>>> + read-only;
>>>> + };
>>>> + };
>>>> +
>>>> + pinctrl@fc038000 {
>>>> +
>>>> + pinctrl_i2c0_default: i2c0_default {
>>>> + pinmux = <PIN_PD21__TWD0>,
>>>> + <PIN_PD22__TWCK0>;
>>>> + bias-disable;
>>>> + };
>>>> +
>>>> + pinctrl_macb0_default: macb0_default {
>>>> + pinmux = <PIN_PD9__GTXCK>,
>>>> + <PIN_PD10__GTXEN>,
>>>> + <PIN_PD11__GRXDV>,
>>>> + <PIN_PD12__GRXER>,
>>>> + <PIN_PD13__GRX0>,
>>>> + <PIN_PD14__GRX1>,
>>>> + <PIN_PD15__GTX0>,
>>>> + <PIN_PD16__GTX1>,
>>>> + <PIN_PD17__GMDC>,
>>>> + <PIN_PD18__GMDIO>;
>>>> + bias-disable;
>>>> + };
>>>> +
>>>> + pinctrl_macb0_phy_irq: macb0_phy_irq {
>>>> + pinmux = <PIN_PD31__GPIO>;
>>>> + bias-disable;
>>>> + };
>>>> +
>>>> + pinctrl_qspi1_default: qspi1_default {
>>>> + sck_cs {
>>>> + pinmux = <PIN_PB5__QSPI1_SCK>,
>>>> + <PIN_PB6__QSPI1_CS>;
>>>> + bias-disable;
>>>> + };
>>>> +
>>>> + data {
>>>> + pinmux = <PIN_PB7__QSPI1_IO0>,
>>>> + <PIN_PB8__QSPI1_IO1>,
>>>> + <PIN_PB9__QSPI1_IO2>,
>>>> + <PIN_PB10__QSPI1_IO3>;
>>>> + bias-pull-up;
>>>> + };
>>>> + };
>>>> + };
>>>> + };
>>>> + };
>>>> +};
>>>> --
>>>> 2.7.4
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-arm-kernel mailing list
>>>> [email protected]
>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
