HiKey960 has four user LEDs, and two special purpose LEDs: WiFi and BT respectively.
All of them are implemented as GPIO. Signed-off-by: Guodong Xu <[email protected]> --- arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 48 +++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 6de86c0..4839885 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -48,6 +48,54 @@ linux,code = <KEY_POWER>; }; }; + + leds { + compatible = "gpio-leds"; + status = "disabled"; + user_led1 { + label = "user_led1"; + /* gpio_150_user_led1 */ + gpios = <&gpio18 6 0>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "user_led2"; + /* gpio_151_user_led2 */ + gpios = <&gpio18 7 0>; + linux,default-trigger = "mmc0"; + }; + + user_led3 { + label = "user_led3"; + /* gpio_189_user_led3 */ + gpios = <&gpio23 5 0>; + default-state = "off"; + }; + + user_led4 { + label = "user_led4"; + /* gpio_190_user_led4 */ + gpios = <&gpio23 6 0>; + linux,default-trigger = "cpu0"; + }; + + wlan_active_led { + label = "wifi_active"; + /* gpio_205_wifi_active */ + gpios = <&gpio25 5 0>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "bt_active"; + gpios = <&gpio25 7 0>; + /* gpio_207_user_led1 */ + linux,default-trigger = "hci0rx"; + default-state = "off"; + }; + }; }; }; -- 2.10.2
