Linus,
Please pull the latest x86-idle-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-idle-for-linus
# HEAD: 34bc3560c657d3d4fb17367ed9bfda803166dce0 x86: Remove empty idle.h
header
There were two bigger changes in this development cycle:
- Remove idle notifiers:
32 files changed, 74 insertions(+), 803 deletions(-)
These notifiers were of questionable value and the main usecase, the i7300
driver, was essentially unmaintained and can be removed, plus modern
power management concepts don't need the callback - so use this golden
opportunity and get rid of this opaque and fragile callback from a latency
sensitive code path.
(Len Brown, Thomas Gleixner)
- Improve the AMD Erratum 400 workaround that used high overhead MSR polling in
the idle loop. (Borisla Petkov, Thomas Gleixner)
out-of-topic modifications in x86-idle-for-linus:
---------------------------------------------------
MAINTAINERS # b65ce83f2a60: i7300_idle: Remove this
driv
drivers/acpi/processor_idle.c # 07c94a381253: x86/amd: Simplify AMD E400
a
drivers/dma/ioat/registers.h # b65ce83f2a60: i7300_idle: Remove this
driv
drivers/idle/Kconfig # b65ce83f2a60: i7300_idle: Remove this
driv
drivers/idle/Makefile # b65ce83f2a60: i7300_idle: Remove this
driv
drivers/idle/i7300_idle.c # b65ce83f2a60: i7300_idle: Remove this
driv
drivers/thermal/intel_powerclamp.c # 34bc3560c657: x86: Remove empty idle.h
hea
Thanks,
Ingo
------------------>
Borislav Petkov (2):
x86/cpufeature: Provide helper to set bugs bits
x86/amd: Simplify AMD E400 aware idle routine
Len Brown (5):
i7300_idle: Remove this driver
x86/idle: Remove idle_notifier
x86/idle: Remove is_idle flag
x86: Remove x86_test_and_clear_bit_percpu()
x86/idle: Remove enter_idle(), exit_idle()
Thomas Gleixner (3):
x86/bugs: Separate AMD E400 erratum and C1E bug
x86/amd: Check for the C1E bug post ACPI subsystem init
x86: Remove empty idle.h header
MAINTAINERS | 6 -
arch/x86/include/asm/acpi.h | 2 +-
arch/x86/include/asm/apic.h | 2 -
arch/x86/include/asm/cpufeature.h | 1 +
arch/x86/include/asm/cpufeatures.h | 2 +
arch/x86/include/asm/idle.h | 22 --
arch/x86/include/asm/percpu.h | 11 -
arch/x86/include/asm/processor.h | 3 +-
arch/x86/kernel/apic/apic.c | 3 +-
arch/x86/kernel/apic/io_apic.c | 1 -
arch/x86/kernel/cpu/amd.c | 20 +-
arch/x86/kernel/cpu/common.c | 1 -
arch/x86/kernel/cpu/mcheck/mce_amd.c | 1 -
arch/x86/kernel/cpu/mcheck/therm_throt.c | 1 -
arch/x86/kernel/cpu/mcheck/threshold.c | 1 -
arch/x86/kernel/cpu/mshyperv.c | 1 -
arch/x86/kernel/irq.c | 1 -
arch/x86/kernel/irq_64.c | 1 -
arch/x86/kernel/kvm.c | 3 -
arch/x86/kernel/process.c | 149 +++-----
arch/x86/kernel/process_32.c | 1 -
arch/x86/kernel/process_64.c | 1 -
arch/x86/kernel/smpboot.c | 2 -
arch/x86/platform/uv/tlb_uv.c | 1 -
drivers/acpi/processor_idle.c | 2 +-
drivers/dma/ioat/registers.h | 2 -
drivers/idle/Kconfig | 17 -
drivers/idle/Makefile | 1 -
drivers/idle/i7300_idle.c | 612 -------------------------------
drivers/thermal/intel_powerclamp.c | 1 -
drivers/xen/events/events_base.c | 2 -
init/main.c | 3 +
32 files changed, 74 insertions(+), 803 deletions(-)
delete mode 100644 arch/x86/include/asm/idle.h
delete mode 100644 drivers/idle/i7300_idle.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 851b89b9edcb..80db20008488 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6087,12 +6087,6 @@ S: Maintained
F: Documentation/cdrom/ide-cd
F: drivers/ide/ide-cd*
-IDLE-I7300
-M: Andy Henroid <[email protected]>
-L: [email protected]
-S: Supported
-F: drivers/idle/i7300_idle.c
-
IEEE 802.15.4 SUBSYSTEM
M: Alexander Aring <[email protected]>
L: [email protected]
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 5391b0ae7cc3..395b69551fce 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -94,7 +94,7 @@ static inline unsigned int
acpi_processor_cstate_check(unsigned int max_cstate)
boot_cpu_data.x86_model <= 0x05 &&
boot_cpu_data.x86_mask < 0x0A)
return 1;
- else if (amd_e400_c1e_detected)
+ else if (boot_cpu_has(X86_BUG_AMD_APIC_C1E))
return 1;
else
return max_cstate;
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index f5aaf6c83222..30a5642eb405 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -11,7 +11,6 @@
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/msr.h>
-#include <asm/idle.h>
#define ARCH_APICTIMER_STOPS_ON_C3 1
@@ -639,7 +638,6 @@ extern void irq_exit(void);
static inline void entering_irq(void)
{
irq_enter();
- exit_idle();
}
static inline void entering_ack_irq(void)
diff --git a/arch/x86/include/asm/cpufeature.h
b/arch/x86/include/asm/cpufeature.h
index 1d2b69fc0ceb..d59c15c3defd 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -204,6 +204,7 @@ static __always_inline __pure bool _static_cpu_has(u16 bit)
#define static_cpu_has_bug(bit) static_cpu_has((bit))
#define boot_cpu_has_bug(bit) cpu_has_bug(&boot_cpu_data, (bit))
+#define boot_cpu_set_bug(bit) set_cpu_cap(&boot_cpu_data, (bit))
#define MAX_CPU_FEATURES (NCAPINTS * 32)
#define cpu_have_feature boot_cpu_has
diff --git a/arch/x86/include/asm/cpufeatures.h
b/arch/x86/include/asm/cpufeatures.h
index a39629206864..ed10b5bf9b93 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -311,4 +311,6 @@
#define X86_BUG_NULL_SEG X86_BUG(10) /* Nulling a selector preserves the
base */
#define X86_BUG_SWAPGS_FENCE X86_BUG(11) /* SWAPGS without input dep on GS */
#define X86_BUG_MONITOR X86_BUG(12) /* IPI required to wake up
remote CPU */
+#define X86_BUG_AMD_E400 X86_BUG(13) /* CPU is among the affected by
Erratum 400 */
+
#endif /* _ASM_X86_CPUFEATURES_H */
diff --git a/arch/x86/include/asm/idle.h b/arch/x86/include/asm/idle.h
deleted file mode 100644
index c5d1785373ed..000000000000
--- a/arch/x86/include/asm/idle.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ASM_X86_IDLE_H
-#define _ASM_X86_IDLE_H
-
-#define IDLE_START 1
-#define IDLE_END 2
-
-struct notifier_block;
-void idle_notifier_register(struct notifier_block *n);
-void idle_notifier_unregister(struct notifier_block *n);
-
-#ifdef CONFIG_X86_64
-void enter_idle(void);
-void exit_idle(void);
-#else /* !CONFIG_X86_64 */
-static inline void enter_idle(void) { }
-static inline void exit_idle(void) { }
-static inline void __exit_idle(void) { }
-#endif /* CONFIG_X86_64 */
-
-void amd_e400_remove_cpu(int cpu);
-
-#endif /* _ASM_X86_IDLE_H */
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 84f58de08c2b..9fa03604b2b3 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -507,17 +507,6 @@ do {
\
#endif
-/* This is not atomic against other CPUs -- CPU preemption needs to be off */
-#define x86_test_and_clear_bit_percpu(bit, var)
\
-({ \
- bool old__; \
- asm volatile("btr %2,"__percpu_arg(1)"\n\t" \
- CC_SET(c) \
- : CC_OUT(c) (old__), "+m" (var) \
- : "dIr" (bit)); \
- old__; \
-})
-
static __always_inline bool x86_this_cpu_constant_test_bit(unsigned int nr,
const unsigned long __percpu *addr)
{
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 984a7bf17f6a..fa609c6f6ba9 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -621,10 +621,9 @@ static inline void sync_core(void)
}
extern void select_idle_routine(const struct cpuinfo_x86 *c);
-extern void init_amd_e400_c1e_mask(void);
+extern void amd_e400_c1e_apic_setup(void);
extern unsigned long boot_option_idle_override;
-extern bool amd_e400_c1e_detected;
enum idle_boot_override {IDLE_NO_OVERRIDE=0, IDLE_HALT, IDLE_NOMWAIT,
IDLE_POLL};
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 88c657b057e2..2ab0ff0f1dbe 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -48,7 +48,6 @@
#include <asm/io_apic.h>
#include <asm/desc.h>
#include <asm/hpet.h>
-#include <asm/idle.h>
#include <asm/mtrr.h>
#include <asm/time.h>
#include <asm/smp.h>
@@ -894,11 +893,13 @@ void __init setup_boot_APIC_clock(void)
/* Setup the lapic or request the broadcast */
setup_APIC_timer();
+ amd_e400_c1e_apic_setup();
}
void setup_secondary_APIC_clock(void)
{
setup_APIC_timer();
+ amd_e400_c1e_apic_setup();
}
/*
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 48e6d84f173e..945e512a112a 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -48,7 +48,6 @@
#include <linux/bootmem.h>
#include <asm/irqdomain.h>
-#include <asm/idle.h>
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/cpu.h>
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index b81fe2d63e15..ae26c282f5d3 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -20,6 +20,10 @@
#include "cpu.h"
+static const int amd_erratum_383[];
+static const int amd_erratum_400[];
+static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum);
+
/*
* nodes_per_socket: Stores the number of nodes per socket.
* Refer to Fam15h Models 00-0fh BKDG - CPUID Fn8000_001E_ECX
@@ -589,11 +593,16 @@ static void early_init_amd(struct cpuinfo_x86 *c)
/* F16h erratum 793, CVE-2013-6885 */
if (c->x86 == 0x16 && c->x86_model <= 0xf)
msr_set_bit(MSR_AMD64_LS_CFG, 15);
-}
-static const int amd_erratum_383[];
-static const int amd_erratum_400[];
-static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum);
+ /*
+ * Check whether the machine is affected by erratum 400. This is
+ * used to select the proper idle routine and to enable the check
+ * whether the machine is affected in arch_post_acpi_init(), which
+ * sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
+ */
+ if (cpu_has_amd_erratum(c, amd_erratum_400))
+ set_cpu_bug(c, X86_BUG_AMD_E400);
+}
static void init_amd_k8(struct cpuinfo_x86 *c)
{
@@ -774,9 +783,6 @@ static void init_amd(struct cpuinfo_x86 *c)
if (c->x86 > 0x11)
set_cpu_cap(c, X86_FEATURE_ARAT);
- if (cpu_has_amd_erratum(c, amd_erratum_400))
- set_cpu_bug(c, X86_BUG_AMD_APIC_C1E);
-
rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
/* 3DNow or LM implies PREFETCHW */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 9bd910a7dd0a..e1f98ff9a3f0 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1144,7 +1144,6 @@ void enable_sep_cpu(void)
void __init identify_boot_cpu(void)
{
identify_cpu(&boot_cpu_data);
- init_amd_e400_c1e_mask();
#ifdef CONFIG_X86_32
sysenter_setup();
enable_sep_cpu();
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c
b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 9b5403462936..832f634fdf47 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -24,7 +24,6 @@
#include <asm/amd_nb.h>
#include <asm/apic.h>
-#include <asm/idle.h>
#include <asm/mce.h>
#include <asm/msr.h>
#include <asm/trace/irq_vectors.h>
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c
b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 6b9dc4d18ccc..2f5c3418b18b 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -26,7 +26,6 @@
#include <asm/processor.h>
#include <asm/apic.h>
-#include <asm/idle.h>
#include <asm/mce.h>
#include <asm/msr.h>
#include <asm/trace/irq_vectors.h>
diff --git a/arch/x86/kernel/cpu/mcheck/threshold.c
b/arch/x86/kernel/cpu/mcheck/threshold.c
index fcf9ae9384f4..9beb092d68a5 100644
--- a/arch/x86/kernel/cpu/mcheck/threshold.c
+++ b/arch/x86/kernel/cpu/mcheck/threshold.c
@@ -6,7 +6,6 @@
#include <asm/irq_vectors.h>
#include <asm/apic.h>
-#include <asm/idle.h>
#include <asm/mce.h>
#include <asm/trace/irq_vectors.h>
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 8f44c5a50ab8..6c044543545e 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -25,7 +25,6 @@
#include <asm/hyperv.h>
#include <asm/mshyperv.h>
#include <asm/desc.h>
-#include <asm/idle.h>
#include <asm/irq_regs.h>
#include <asm/i8259.h>
#include <asm/apic.h>
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 9f669fdd2010..7c6e9ffe4424 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -14,7 +14,6 @@
#include <asm/apic.h>
#include <asm/io_apic.h>
#include <asm/irq.h>
-#include <asm/idle.h>
#include <asm/mce.h>
#include <asm/hw_irq.h>
#include <asm/desc.h>
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 9ebd0b0e73d9..6b0678a541e2 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -16,7 +16,6 @@
#include <linux/uaccess.h>
#include <linux/smp.h>
#include <asm/io_apic.h>
-#include <asm/idle.h>
#include <asm/apic.h>
int sysctl_panic_on_stackoverflow;
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index edbbfc854e39..05fe50e5f42c 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -42,7 +42,6 @@
#include <asm/traps.h>
#include <asm/desc.h>
#include <asm/tlbflush.h>
-#include <asm/idle.h>
#include <asm/apic.h>
#include <asm/apicdef.h>
#include <asm/hypervisor.h>
@@ -267,13 +266,11 @@ do_async_page_fault(struct pt_regs *regs, unsigned long
error_code)
case KVM_PV_REASON_PAGE_NOT_PRESENT:
/* page is swapped out by the host. */
prev_state = exception_enter();
- exit_idle();
kvm_async_pf_task_wait((u32)read_cr2());
exception_exit(prev_state);
break;
case KVM_PV_REASON_PAGE_READY:
rcu_irq_enter();
- exit_idle();
kvm_async_pf_task_wake((u32)read_cr2());
rcu_irq_exit();
break;
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 0888a879120f..43c36d8a6ae2 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -23,7 +23,6 @@
#include <asm/cpu.h>
#include <asm/apic.h>
#include <asm/syscalls.h>
-#include <asm/idle.h>
#include <asm/uaccess.h>
#include <asm/mwait.h>
#include <asm/fpu/internal.h>
@@ -65,23 +64,6 @@ __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct,
cpu_tss) = {
};
EXPORT_PER_CPU_SYMBOL(cpu_tss);
-#ifdef CONFIG_X86_64
-static DEFINE_PER_CPU(unsigned char, is_idle);
-static ATOMIC_NOTIFIER_HEAD(idle_notifier);
-
-void idle_notifier_register(struct notifier_block *n)
-{
- atomic_notifier_chain_register(&idle_notifier, n);
-}
-EXPORT_SYMBOL_GPL(idle_notifier_register);
-
-void idle_notifier_unregister(struct notifier_block *n)
-{
- atomic_notifier_chain_unregister(&idle_notifier, n);
-}
-EXPORT_SYMBOL_GPL(idle_notifier_unregister);
-#endif
-
/*
* this gets called so that we can store lazy state into memory and copy the
* current task into the new thread.
@@ -251,39 +233,9 @@ static inline void play_dead(void)
}
#endif
-#ifdef CONFIG_X86_64
-void enter_idle(void)
-{
- this_cpu_write(is_idle, 1);
- atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL);
-}
-
-static void __exit_idle(void)
-{
- if (x86_test_and_clear_bit_percpu(0, is_idle) == 0)
- return;
- atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL);
-}
-
-/* Called from interrupts to signify idle end */
-void exit_idle(void)
-{
- /* idle loop has pid 0 */
- if (current->pid)
- return;
- __exit_idle();
-}
-#endif
-
void arch_cpu_idle_enter(void)
{
local_touch_nmi();
- enter_idle();
-}
-
-void arch_cpu_idle_exit(void)
-{
- __exit_idle();
}
void arch_cpu_idle_dead(void)
@@ -336,59 +288,33 @@ void stop_this_cpu(void *dummy)
halt();
}
-bool amd_e400_c1e_detected;
-EXPORT_SYMBOL(amd_e400_c1e_detected);
-
-static cpumask_var_t amd_e400_c1e_mask;
-
-void amd_e400_remove_cpu(int cpu)
-{
- if (amd_e400_c1e_mask != NULL)
- cpumask_clear_cpu(cpu, amd_e400_c1e_mask);
-}
-
/*
- * AMD Erratum 400 aware idle routine. We check for C1E active in the interrupt
- * pending message MSR. If we detect C1E, then we handle it the same
- * way as C3 power states (local apic timer and TSC stop)
+ * AMD Erratum 400 aware idle routine. We handle it the same way as C3 power
+ * states (local apic timer and TSC stop).
*/
static void amd_e400_idle(void)
{
- if (!amd_e400_c1e_detected) {
- u32 lo, hi;
-
- rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
-
- if (lo & K8_INTP_C1E_ACTIVE_MASK) {
- amd_e400_c1e_detected = true;
- if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
- mark_tsc_unstable("TSC halt in AMD C1E");
- pr_info("System has AMD C1E enabled\n");
- }
+ /*
+ * We cannot use static_cpu_has_bug() here because X86_BUG_AMD_APIC_C1E
+ * gets set after static_cpu_has() places have been converted via
+ * alternatives.
+ */
+ if (!boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E)) {
+ default_idle();
+ return;
}
- if (amd_e400_c1e_detected) {
- int cpu = smp_processor_id();
+ tick_broadcast_enter();
- if (!cpumask_test_cpu(cpu, amd_e400_c1e_mask)) {
- cpumask_set_cpu(cpu, amd_e400_c1e_mask);
- /* Force broadcast so ACPI can not interfere. */
- tick_broadcast_force();
- pr_info("Switch to broadcast mode on CPU%d\n", cpu);
- }
- tick_broadcast_enter();
-
- default_idle();
+ default_idle();
- /*
- * The switch back from broadcast mode needs to be
- * called with interrupts disabled.
- */
- local_irq_disable();
- tick_broadcast_exit();
- local_irq_enable();
- } else
- default_idle();
+ /*
+ * The switch back from broadcast mode needs to be called with
+ * interrupts disabled.
+ */
+ local_irq_disable();
+ tick_broadcast_exit();
+ local_irq_enable();
}
/*
@@ -448,8 +374,7 @@ void select_idle_routine(const struct cpuinfo_x86 *c)
if (x86_idle || boot_option_idle_override == IDLE_POLL)
return;
- if (cpu_has_bug(c, X86_BUG_AMD_APIC_C1E)) {
- /* E400: APIC timer interrupt does not wake up CPU from C1e */
+ if (boot_cpu_has_bug(X86_BUG_AMD_E400)) {
pr_info("using AMD E400 aware idle routine\n");
x86_idle = amd_e400_idle;
} else if (prefer_mwait_c1_over_halt(c)) {
@@ -459,11 +384,37 @@ void select_idle_routine(const struct cpuinfo_x86 *c)
x86_idle = default_idle;
}
-void __init init_amd_e400_c1e_mask(void)
+void amd_e400_c1e_apic_setup(void)
+{
+ if (boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E)) {
+ pr_info("Switch to broadcast mode on CPU%d\n",
smp_processor_id());
+ local_irq_disable();
+ tick_broadcast_force();
+ local_irq_enable();
+ }
+}
+
+void __init arch_post_acpi_subsys_init(void)
{
- /* If we're using amd_e400_idle, we need to allocate amd_e400_c1e_mask.
*/
- if (x86_idle == amd_e400_idle)
- zalloc_cpumask_var(&amd_e400_c1e_mask, GFP_KERNEL);
+ u32 lo, hi;
+
+ if (!boot_cpu_has_bug(X86_BUG_AMD_E400))
+ return;
+
+ /*
+ * AMD E400 detection needs to happen after ACPI has been enabled. If
+ * the machine is affected K8_INTP_C1E_ACTIVE_MASK bits are set in
+ * MSR_K8_INT_PENDING_MSG.
+ */
+ rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
+ if (!(lo & K8_INTP_C1E_ACTIVE_MASK))
+ return;
+
+ boot_cpu_set_bug(X86_BUG_AMD_APIC_C1E);
+
+ if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
+ mark_tsc_unstable("TSC halt in AMD C1E");
+ pr_info("System has AMD C1E enabled\n");
}
static int __init idle_setup(char *str)
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index bd7be8efdc4c..3e4ff92597ff 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -49,7 +49,6 @@
#include <asm/tlbflush.h>
#include <asm/cpu.h>
-#include <asm/idle.h>
#include <asm/syscalls.h>
#include <asm/debugreg.h>
#include <asm/switch_to.h>
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index b3760b3c1ca0..bb1517106ec1 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -44,7 +44,6 @@
#include <asm/desc.h>
#include <asm/proto.h>
#include <asm/ia32.h>
-#include <asm/idle.h>
#include <asm/syscalls.h>
#include <asm/debugreg.h>
#include <asm/switch_to.h>
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 42f5eb7b4f6c..352ddd560d19 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -58,7 +58,6 @@
#include <asm/desc.h>
#include <asm/nmi.h>
#include <asm/irq.h>
-#include <asm/idle.h>
#include <asm/realmode.h>
#include <asm/cpu.h>
#include <asm/numa.h>
@@ -1575,7 +1574,6 @@ void play_dead_common(void)
{
idle_task_exit();
reset_lazy_tlbstate();
- amd_e400_remove_cpu(raw_smp_processor_id());
/* Ack it */
(void)cpu_report_death();
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 9e42842e924a..766d4d3529a1 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -19,7 +19,6 @@
#include <asm/uv/uv_hub.h>
#include <asm/uv/uv_bau.h>
#include <asm/apic.h>
-#include <asm/idle.h>
#include <asm/tsc.h>
#include <asm/irq_vectors.h>
#include <asm/timer.h>
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 2237d3f24f0e..5c8aa9cf62d7 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -141,7 +141,7 @@ static void lapic_timer_check_state(int state, struct
acpi_processor *pr,
if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
return;
- if (amd_e400_c1e_detected)
+ if (boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E))
type = ACPI_STATE_C1;
/*
diff --git a/drivers/dma/ioat/registers.h b/drivers/dma/ioat/registers.h
index 48fa4cf9f64a..2f3bbc88ff2a 100644
--- a/drivers/dma/ioat/registers.h
+++ b/drivers/dma/ioat/registers.h
@@ -106,8 +106,6 @@
#define IOAT_DMA_COMP_V1 0x0001 /* Compatibility with
DMA version 1 */
#define IOAT_DMA_COMP_V2 0x0002 /* Compatibility with
DMA version 2 */
-/* IOAT1 define left for i7300_idle driver to not fail compiling */
-#define IOAT1_CHANSTS_OFFSET 0x04
#define IOAT_CHANSTS_OFFSET 0x08 /* 64-bit Channel Status
Register */
#define IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR (~0x3fULL)
#define IOAT_CHANSTS_SOFT_ERR 0x10ULL
diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig
index 4732dfc15447..55bcf803841e 100644
--- a/drivers/idle/Kconfig
+++ b/drivers/idle/Kconfig
@@ -8,20 +8,3 @@ config INTEL_IDLE
native Intel hardware idle features. The acpi_idle driver
can be configured at the same time, in order to handle
processors intel_idle does not support.
-
-menu "Memory power savings"
-depends on X86_64
-
-config I7300_IDLE_IOAT_CHANNEL
- bool
-
-config I7300_IDLE
- tristate "Intel chipset idle memory power saving driver"
- select I7300_IDLE_IOAT_CHANNEL
- help
- Enable memory power savings when idle with certain Intel server
- chipsets. The chipset must have I/O AT support, such as the
- Intel 7300. The power savings depends on the type and quantity of
- DRAM devices.
-
-endmenu
diff --git a/drivers/idle/Makefile b/drivers/idle/Makefile
index 23d295cf10f2..0007111d73e9 100644
--- a/drivers/idle/Makefile
+++ b/drivers/idle/Makefile
@@ -1,3 +1,2 @@
-obj-$(CONFIG_I7300_IDLE) += i7300_idle.o
obj-$(CONFIG_INTEL_IDLE) += intel_idle.o
diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c
deleted file mode 100644
index ffeebc7e9f1c..000000000000
--- a/drivers/idle/i7300_idle.c
+++ /dev/null
@@ -1,612 +0,0 @@
-/*
- * (C) Copyright 2008 Intel Corporation
- * Authors:
- * Andy Henroid <[email protected]>
- * Venkatesh Pallipadi <[email protected]>
- */
-
-/*
- * Save DIMM power on Intel 7300-based platforms when all CPUs/cores
- * are idle, using the DIMM thermal throttling capability.
- *
- * This driver depends on the Intel integrated DMA controller (I/O AT).
- * If the driver for I/O AT (drivers/dma/ioatdma*) is also enabled,
- * this driver should work cooperatively.
- */
-
-/* #define DEBUG */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/gfp.h>
-#include <linux/sched.h>
-#include <linux/notifier.h>
-#include <linux/cpumask.h>
-#include <linux/ktime.h>
-#include <linux/delay.h>
-#include <linux/debugfs.h>
-#include <linux/stop_machine.h>
-#include <linux/i7300_idle.h>
-
-#include <asm/idle.h>
-
-#include "../dma/ioat/hw.h"
-#include "../dma/ioat/registers.h"
-
-#define I7300_IDLE_DRIVER_VERSION "1.55"
-#define I7300_PRINT "i7300_idle:"
-
-#define MAX_STOP_RETRIES 10
-
-static int debug;
-module_param_named(debug, debug, uint, 0644);
-MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
-
-static int forceload;
-module_param_named(forceload, forceload, uint, 0644);
-MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000");
-
-#define dprintk(fmt, arg...) \
- do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0)
-
-/*
- * Value to set THRTLOW to when initiating throttling
- * 0 = No throttling
- * 1 = Throttle when > 4 activations per eval window (Maximum throttling)
- * 2 = Throttle when > 8 activations
- * 168 = Throttle when > 672 activations (Minimum throttling)
- */
-#define MAX_THROTTLE_LOW_LIMIT 168
-static uint throttle_low_limit = 1;
-module_param_named(throttle_low_limit, throttle_low_limit, uint, 0644);
-MODULE_PARM_DESC(throttle_low_limit,
- "Value for THRTLOWLM activation field "
- "(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)");
-
-/*
- * simple invocation and duration statistics
- */
-static unsigned long total_starts;
-static unsigned long total_us;
-
-#ifdef DEBUG
-static unsigned long past_skip;
-#endif
-
-static struct pci_dev *fbd_dev;
-
-static raw_spinlock_t i7300_idle_lock;
-static int i7300_idle_active;
-
-static u8 i7300_idle_thrtctl_saved;
-static u8 i7300_idle_thrtlow_saved;
-static u32 i7300_idle_mc_saved;
-
-static cpumask_var_t idle_cpumask;
-static ktime_t start_ktime;
-static unsigned long avg_idle_us;
-
-static struct dentry *debugfs_dir;
-
-/* Begin: I/O AT Helper routines */
-
-#define IOAT_CHANBASE(ioat_ctl, chan) (ioat_ctl + 0x80 + 0x80 * chan)
-/* Snoop control (disable snoops when coherency is not important) */
-#define IOAT_DESC_SADDR_SNP_CTL (1UL << 1)
-#define IOAT_DESC_DADDR_SNP_CTL (1UL << 2)
-
-static struct pci_dev *ioat_dev;
-static struct ioat_dma_descriptor *ioat_desc; /* I/O AT desc & data (1 page) */
-static unsigned long ioat_desc_phys;
-static u8 *ioat_iomap; /* I/O AT memory-mapped control regs (aka CB_BAR) */
-static u8 *ioat_chanbase;
-
-/* Start I/O AT memory copy */
-static int i7300_idle_ioat_start(void)
-{
- u32 err;
- /* Clear error (due to circular descriptor pointer) */
- err = readl(ioat_chanbase + IOAT_CHANERR_OFFSET);
- if (err)
- writel(err, ioat_chanbase + IOAT_CHANERR_OFFSET);
-
- writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
- return 0;
-}
-
-/* Stop I/O AT memory copy */
-static void i7300_idle_ioat_stop(void)
-{
- int i;
- u64 sts;
-
- for (i = 0; i < MAX_STOP_RETRIES; i++) {
- writeb(IOAT_CHANCMD_RESET,
- ioat_chanbase + IOAT1_CHANCMD_OFFSET);
-
- udelay(10);
-
- sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
- IOAT_CHANSTS_STATUS;
-
- if (sts != IOAT_CHANSTS_ACTIVE)
- break;
-
- }
-
- if (i == MAX_STOP_RETRIES) {
- dprintk("failed to stop I/O AT after %d retries\n",
- MAX_STOP_RETRIES);
- }
-}
-
-/* Test I/O AT by copying 1024 byte from 2k to 1k */
-static int __init i7300_idle_ioat_selftest(u8 *ctl,
- struct ioat_dma_descriptor *desc, unsigned long desc_phys)
-{
- u64 chan_sts;
-
- memset(desc, 0, 2048);
- memset((u8 *) desc + 2048, 0xab, 1024);
-
- desc[0].size = 1024;
- desc[0].ctl = 0;
- desc[0].src_addr = desc_phys + 2048;
- desc[0].dst_addr = desc_phys + 1024;
- desc[0].next = 0;
-
- writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
- writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
-
- udelay(1000);
-
- chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
- IOAT_CHANSTS_STATUS;
-
- if (chan_sts != IOAT_CHANSTS_DONE) {
- /* Not complete, reset the channel */
- writeb(IOAT_CHANCMD_RESET,
- ioat_chanbase + IOAT1_CHANCMD_OFFSET);
- return -1;
- }
-
- if (*(u32 *) ((u8 *) desc + 3068) != 0xabababab ||
- *(u32 *) ((u8 *) desc + 2044) != 0xabababab) {
- dprintk("Data values src 0x%x, dest 0x%x, memset 0x%x\n",
- *(u32 *) ((u8 *) desc + 2048),
- *(u32 *) ((u8 *) desc + 1024),
- *(u32 *) ((u8 *) desc + 3072));
- return -1;
- }
- return 0;
-}
-
-static struct device dummy_dma_dev = {
- .init_name = "fallback device",
- .coherent_dma_mask = DMA_BIT_MASK(64),
- .dma_mask = &dummy_dma_dev.coherent_dma_mask,
-};
-
-/* Setup and initialize I/O AT */
-/* This driver needs I/O AT as the throttling takes effect only when there is
- * some memory activity. We use I/O AT to set up a dummy copy, while all CPUs
- * go idle and memory is throttled.
- */
-static int __init i7300_idle_ioat_init(void)
-{
- u8 ver, chan_count, ioat_chan;
- u16 chan_ctl;
-
- ioat_iomap = (u8 *) ioremap_nocache(pci_resource_start(ioat_dev, 0),
- pci_resource_len(ioat_dev, 0));
-
- if (!ioat_iomap) {
- printk(KERN_ERR I7300_PRINT "failed to map I/O AT registers\n");
- goto err_ret;
- }
-
- ver = readb(ioat_iomap + IOAT_VER_OFFSET);
- if (ver != IOAT_VER_1_2) {
- printk(KERN_ERR I7300_PRINT "unknown I/O AT version (%u.%u)\n",
- ver >> 4, ver & 0xf);
- goto err_unmap;
- }
-
- chan_count = readb(ioat_iomap + IOAT_CHANCNT_OFFSET);
- if (!chan_count) {
- printk(KERN_ERR I7300_PRINT "unexpected # of I/O AT channels "
- "(%u)\n",
- chan_count);
- goto err_unmap;
- }
-
- ioat_chan = chan_count - 1;
- ioat_chanbase = IOAT_CHANBASE(ioat_iomap, ioat_chan);
-
- chan_ctl = readw(ioat_chanbase + IOAT_CHANCTRL_OFFSET);
- if (chan_ctl & IOAT_CHANCTRL_CHANNEL_IN_USE) {
- printk(KERN_ERR I7300_PRINT "channel %d in use\n", ioat_chan);
- goto err_unmap;
- }
-
- writew(IOAT_CHANCTRL_CHANNEL_IN_USE,
- ioat_chanbase + IOAT_CHANCTRL_OFFSET);
-
- ioat_desc = (struct ioat_dma_descriptor *)dma_alloc_coherent(
- &dummy_dma_dev, 4096,
- (dma_addr_t *)&ioat_desc_phys, GFP_KERNEL);
- if (!ioat_desc) {
- printk(KERN_ERR I7300_PRINT "failed to allocate I/O AT desc\n");
- goto err_mark_unused;
- }
-
- writel(ioat_desc_phys & 0xffffffffUL,
- ioat_chanbase + IOAT1_CHAINADDR_OFFSET_LOW);
- writel(ioat_desc_phys >> 32,
- ioat_chanbase + IOAT1_CHAINADDR_OFFSET_HIGH);
-
- if (i7300_idle_ioat_selftest(ioat_iomap, ioat_desc, ioat_desc_phys)) {
- printk(KERN_ERR I7300_PRINT "I/O AT self-test failed\n");
- goto err_free;
- }
-
- /* Setup circular I/O AT descriptor chain */
- ioat_desc[0].ctl = IOAT_DESC_SADDR_SNP_CTL | IOAT_DESC_DADDR_SNP_CTL;
- ioat_desc[0].src_addr = ioat_desc_phys + 2048;
- ioat_desc[0].dst_addr = ioat_desc_phys + 3072;
- ioat_desc[0].size = 128;
- ioat_desc[0].next = ioat_desc_phys + sizeof(struct ioat_dma_descriptor);
-
- ioat_desc[1].ctl = ioat_desc[0].ctl;
- ioat_desc[1].src_addr = ioat_desc[0].src_addr;
- ioat_desc[1].dst_addr = ioat_desc[0].dst_addr;
- ioat_desc[1].size = ioat_desc[0].size;
- ioat_desc[1].next = ioat_desc_phys;
-
- return 0;
-
-err_free:
- dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0);
-err_mark_unused:
- writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET);
-err_unmap:
- iounmap(ioat_iomap);
-err_ret:
- return -ENODEV;
-}
-
-/* Cleanup I/O AT */
-static void __exit i7300_idle_ioat_exit(void)
-{
- int i;
- u64 chan_sts;
-
- i7300_idle_ioat_stop();
-
- /* Wait for a while for the channel to halt before releasing */
- for (i = 0; i < MAX_STOP_RETRIES; i++) {
- writeb(IOAT_CHANCMD_RESET,
- ioat_chanbase + IOAT1_CHANCMD_OFFSET);
-
- chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
- IOAT_CHANSTS_STATUS;
-
- if (chan_sts != IOAT_CHANSTS_ACTIVE) {
- writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET);
- break;
- }
- udelay(1000);
- }
-
- chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
- IOAT_CHANSTS_STATUS;
-
- /*
- * We tried to reset multiple times. If IO A/T channel is still active
- * flag an error and return without cleanup. Memory leak is better
- * than random corruption in that extreme error situation.
- */
- if (chan_sts == IOAT_CHANSTS_ACTIVE) {
- printk(KERN_ERR I7300_PRINT "Unable to stop IO A/T channels."
- " Not freeing resources\n");
- return;
- }
-
- dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0);
- iounmap(ioat_iomap);
-}
-
-/* End: I/O AT Helper routines */
-
-#define DIMM_THRTLOW 0x64
-#define DIMM_THRTCTL 0x67
-#define DIMM_THRTCTL_THRMHUNT (1UL << 0)
-#define DIMM_MC 0x40
-#define DIMM_GTW_MODE (1UL << 17)
-#define DIMM_GBLACT 0x60
-
-/*
- * Keep track of an exponential-decaying average of recent idle durations.
- * The latest duration gets DURATION_WEIGHT_PCT percentage weight
- * in this average, with the old average getting the remaining weight.
- *
- * High weights emphasize recent history, low weights include long history.
- */
-#define DURATION_WEIGHT_PCT 55
-
-/*
- * When the decaying average of recent durations or the predicted duration
- * of the next timer interrupt is shorter than duration_threshold, the
- * driver will decline to throttle.
- */
-#define DURATION_THRESHOLD_US 100
-
-
-/* Store DIMM thermal throttle configuration */
-static int i7300_idle_thrt_save(void)
-{
- u32 new_mc_val;
- u8 gblactlm;
-
- pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &i7300_idle_thrtctl_saved);
- pci_read_config_byte(fbd_dev, DIMM_THRTLOW, &i7300_idle_thrtlow_saved);
- pci_read_config_dword(fbd_dev, DIMM_MC, &i7300_idle_mc_saved);
- /*
- * Make sure we have Global Throttling Window Mode set to have a
- * "short" window. This (mostly) works around an issue where
- * throttling persists until the end of the global throttling window
- * size. On the tested system, this was resulting in a maximum of
- * 64 ms to exit throttling (average 32 ms). The actual numbers
- * depends on system frequencies. Setting the short window reduces
- * this by a factor of 4096.
- *
- * We will only do this only if the system is set for
- * unlimited-activations while in open-loop throttling (i.e., when
- * Global Activation Throttle Limit is zero).
- */
- pci_read_config_byte(fbd_dev, DIMM_GBLACT, &gblactlm);
- dprintk("thrtctl_saved = 0x%02x, thrtlow_saved = 0x%02x\n",
- i7300_idle_thrtctl_saved,
- i7300_idle_thrtlow_saved);
- dprintk("mc_saved = 0x%08x, gblactlm = 0x%02x\n",
- i7300_idle_mc_saved,
- gblactlm);
- if (gblactlm == 0) {
- new_mc_val = i7300_idle_mc_saved | DIMM_GTW_MODE;
- pci_write_config_dword(fbd_dev, DIMM_MC, new_mc_val);
- return 0;
- } else {
- dprintk("could not set GTW_MODE = 1 (OLTT enabled)\n");
- return -ENODEV;
- }
-}
-
-/* Restore DIMM thermal throttle configuration */
-static void i7300_idle_thrt_restore(void)
-{
- pci_write_config_dword(fbd_dev, DIMM_MC, i7300_idle_mc_saved);
- pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved);
- pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved);
-}
-
-/* Enable DIMM thermal throttling */
-static void i7300_idle_start(void)
-{
- u8 new_ctl;
- u8 limit;
-
- new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT;
- pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
-
- limit = throttle_low_limit;
- if (unlikely(limit > MAX_THROTTLE_LOW_LIMIT))
- limit = MAX_THROTTLE_LOW_LIMIT;
-
- pci_write_config_byte(fbd_dev, DIMM_THRTLOW, limit);
-
- new_ctl = i7300_idle_thrtctl_saved | DIMM_THRTCTL_THRMHUNT;
- pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
-}
-
-/* Disable DIMM thermal throttling */
-static void i7300_idle_stop(void)
-{
- u8 new_ctl;
- u8 got_ctl;
-
- new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT;
- pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
-
- pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved);
- pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved);
- pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &got_ctl);
- WARN_ON_ONCE(got_ctl != i7300_idle_thrtctl_saved);
-}
-
-
-/*
- * i7300_avg_duration_check()
- * return 0 if the decaying average of recent idle durations is
- * more than DURATION_THRESHOLD_US
- */
-static int i7300_avg_duration_check(void)
-{
- if (avg_idle_us >= DURATION_THRESHOLD_US)
- return 0;
-
-#ifdef DEBUG
- past_skip++;
-#endif
- return 1;
-}
-
-/* Idle notifier to look at idle CPUs */
-static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val,
- void *data)
-{
- unsigned long flags;
- ktime_t now_ktime;
- static ktime_t idle_begin_time;
- static int time_init = 1;
-
- if (!throttle_low_limit)
- return 0;
-
- if (unlikely(time_init)) {
- time_init = 0;
- idle_begin_time = ktime_get();
- }
-
- raw_spin_lock_irqsave(&i7300_idle_lock, flags);
- if (val == IDLE_START) {
-
- cpumask_set_cpu(smp_processor_id(), idle_cpumask);
-
- if (cpumask_weight(idle_cpumask) != num_online_cpus())
- goto end;
-
- now_ktime = ktime_get();
- idle_begin_time = now_ktime;
-
- if (i7300_avg_duration_check())
- goto end;
-
- i7300_idle_active = 1;
- total_starts++;
- start_ktime = now_ktime;
-
- i7300_idle_start();
- i7300_idle_ioat_start();
-
- } else if (val == IDLE_END) {
- cpumask_clear_cpu(smp_processor_id(), idle_cpumask);
- if (cpumask_weight(idle_cpumask) == (num_online_cpus() - 1)) {
- /* First CPU coming out of idle */
- u64 idle_duration_us;
-
- now_ktime = ktime_get();
-
- idle_duration_us = ktime_to_us(ktime_sub
- (now_ktime, idle_begin_time));
-
- avg_idle_us =
- ((100 - DURATION_WEIGHT_PCT) * avg_idle_us +
- DURATION_WEIGHT_PCT * idle_duration_us) / 100;
-
- if (i7300_idle_active) {
- ktime_t idle_ktime;
-
- idle_ktime = ktime_sub(now_ktime, start_ktime);
- total_us += ktime_to_us(idle_ktime);
-
- i7300_idle_ioat_stop();
- i7300_idle_stop();
- i7300_idle_active = 0;
- }
- }
- }
-end:
- raw_spin_unlock_irqrestore(&i7300_idle_lock, flags);
- return 0;
-}
-
-static struct notifier_block i7300_idle_nb = {
- .notifier_call = i7300_idle_notifier,
-};
-
-MODULE_DEVICE_TABLE(pci, pci_tbl);
-
-static ssize_t stats_read_ul(struct file *fp, char __user *ubuf, size_t count,
- loff_t *off)
-{
- unsigned long *p = fp->private_data;
- char buf[32];
- int len;
-
- len = snprintf(buf, 32, "%lu\n", *p);
- return simple_read_from_buffer(ubuf, count, off, buf, len);
-}
-
-static const struct file_operations idle_fops = {
- .open = simple_open,
- .read = stats_read_ul,
- .llseek = default_llseek,
-};
-
-struct debugfs_file_info {
- void *ptr;
- char name[32];
- struct dentry *file;
-} debugfs_file_list[] = {
- {&total_starts, "total_starts", NULL},
- {&total_us, "total_us", NULL},
-#ifdef DEBUG
- {&past_skip, "past_skip", NULL},
-#endif
- {NULL, "", NULL}
- };
-
-static int __init i7300_idle_init(void)
-{
- raw_spin_lock_init(&i7300_idle_lock);
- total_us = 0;
-
- if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload))
- return -ENODEV;
-
- if (i7300_idle_thrt_save())
- return -ENODEV;
-
- if (i7300_idle_ioat_init())
- return -ENODEV;
-
- if (!zalloc_cpumask_var(&idle_cpumask, GFP_KERNEL))
- return -ENOMEM;
-
- debugfs_dir = debugfs_create_dir("i7300_idle", NULL);
- if (debugfs_dir) {
- int i = 0;
-
- while (debugfs_file_list[i].ptr != NULL) {
- debugfs_file_list[i].file = debugfs_create_file(
- debugfs_file_list[i].name,
- S_IRUSR,
- debugfs_dir,
- debugfs_file_list[i].ptr,
- &idle_fops);
- i++;
- }
- }
-
- idle_notifier_register(&i7300_idle_nb);
-
- printk(KERN_INFO "i7300_idle: loaded v%s\n", I7300_IDLE_DRIVER_VERSION);
- return 0;
-}
-
-static void __exit i7300_idle_exit(void)
-{
- idle_notifier_unregister(&i7300_idle_nb);
- free_cpumask_var(idle_cpumask);
-
- if (debugfs_dir) {
- int i = 0;
-
- while (debugfs_file_list[i].file != NULL) {
- debugfs_remove(debugfs_file_list[i].file);
- i++;
- }
-
- debugfs_remove(debugfs_dir);
- }
- i7300_idle_thrt_restore();
- i7300_idle_ioat_exit();
-}
-
-module_init(i7300_idle_init);
-module_exit(i7300_idle_exit);
-
-MODULE_AUTHOR("Andy Henroid <[email protected]>");
-MODULE_DESCRIPTION("Intel Chipset DIMM Idle Power Saving Driver v"
- I7300_IDLE_DRIVER_VERSION);
-MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/intel_powerclamp.c
b/drivers/thermal/intel_powerclamp.c
index 7a223074df3d..bfc5a142667b 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -56,7 +56,6 @@
#include <asm/msr.h>
#include <asm/mwait.h>
#include <asm/cpu_device_id.h>
-#include <asm/idle.h>
#include <asm/hardirq.h>
#define MAX_TARGET_RATIO (50U)
diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c
index 9ecfcdcdd6d6..adc19ce3cc66 100644
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -37,7 +37,6 @@
#include <asm/desc.h>
#include <asm/ptrace.h>
#include <asm/irq.h>
-#include <asm/idle.h>
#include <asm/io_apic.h>
#include <asm/i8259.h>
#include <asm/xen/pci.h>
@@ -1256,7 +1255,6 @@ void xen_evtchn_do_upcall(struct pt_regs *regs)
irq_enter();
#ifdef CONFIG_X86
- exit_idle();
inc_irq_stat(irq_hv_callback_count);
#endif
diff --git a/init/main.c b/init/main.c
index 2858be732f6d..1d7038c1ee19 100644
--- a/init/main.c
+++ b/init/main.c
@@ -448,6 +448,8 @@ void __init parse_early_param(void)
done = 1;
}
+void __init __weak arch_post_acpi_subsys_init(void) { }
+
void __init __weak smp_setup_processor_id(void)
{
}
@@ -649,6 +651,7 @@ asmlinkage __visible void __init start_kernel(void)
check_bugs();
acpi_subsystem_init();
+ arch_post_acpi_subsys_init();
sfi_init_late();
if (efi_enabled(EFI_RUNTIME_SERVICES)) {
