The set_to_preset_on_index sysfs attribute provides a boolean
configuration option to enable a preset operation on the respective
channel's counter when Index occurs. However, the corresponding
configuration bit on the Input/Output Control register must be set low
to enable the preset operation.
This patch inverts the internal driver boolean logic exposed via the
set_to_preset_on_index attribute in order to correctly configure the
device which expects an active low bit.
Fixes: 28e5d3bb0325 ("iio: 104-quad-8: Add IIO support for the ACCES
104-QUAD-8")
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/iio/counter/104-quad-8.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/counter/104-quad-8.c b/drivers/iio/counter/104-quad-8.c
index 2d2ee35..9847221 100644
--- a/drivers/iio/counter/104-quad-8.c
+++ b/drivers/iio/counter/104-quad-8.c
@@ -233,7 +233,7 @@ static ssize_t quad8_read_set_to_preset_on_index(struct
iio_dev *indio_dev,
const struct quad8_iio *const priv = iio_priv(indio_dev);
return snprintf(buf, PAGE_SIZE, "%u\n",
- priv->preset_enable[chan->channel]);
+ !priv->preset_enable[chan->channel]);
}
static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
@@ -250,6 +250,9 @@ static ssize_t quad8_write_set_to_preset_on_index(struct
iio_dev *indio_dev,
if (ret)
return ret;
+ /* Preset enable is active low in Input/Output Control register */
+ preset_enable = !preset_enable;
+
priv->preset_enable[chan->channel] = preset_enable;
ior_cfg = priv->ab_enable[chan->channel] |
--
2.10.2
