On Fri, Jun 24, 2016 at 05:40:00PM -0700, Andrew Duggan wrote:
> On 06/10/2016 10:25 PM, Bjorn Andersson wrote:
> >From: Bjorn Andersson <[email protected]>
> >
> >Support the two supplies - vdd and vio - to make it possible to control
> >power to the Synaptics chip.
> >
> >Signed-off-by: Bjorn Andersson <[email protected]>
> >Signed-off-by: Bjorn Andersson <[email protected]>
>
> Reviewed-by: Andrew Duggan <[email protected]>
Applied, thank you.
>
> >---
> > .../devicetree/bindings/input/rmi4/rmi_i2c.txt | 9 +++++
> > drivers/input/rmi4/rmi_i2c.c | 41
> > ++++++++++++++++++++++
> > 2 files changed, 50 insertions(+)
> >
> >diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
> >b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
> >index 95fa715c6046..ec908b91fd90 100644
> >--- a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
> >+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
> >@@ -22,6 +22,15 @@ See
> >Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> > - syna,reset-delay-ms: The number of milliseconds to wait after resetting
> > the
> > device.
> >+- syna,startup-delay-ms: The number of milliseconds to wait after powering
> >on
> >+ the device.
> >+
> >+- vdd-supply: VDD power supply.
> >+See ../regulator/regulator.txt
> >+
> >+- vio-supply: VIO power supply
> >+See ../regulator/regulator.txt
> >+
> > Function Parameters:
> > Parameters specific to RMI functions are contained in child nodes of the
> > rmi device
> > node. Documentation for the parameters of each function can be found in:
> >diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c
> >index a96a326b53bd..71dc6cdde8ac 100644
> >--- a/drivers/input/rmi4/rmi_i2c.c
> >+++ b/drivers/input/rmi4/rmi_i2c.c
> >@@ -11,6 +11,8 @@
> > #include <linux/rmi.h>
> > #include <linux/irq.h>
> > #include <linux/of.h>
> >+#include <linux/delay.h>
> >+#include <linux/regulator/consumer.h>
> > #include "rmi_driver.h"
> > #define BUFFER_SIZE_INCREMENT 32
> >@@ -37,6 +39,9 @@ struct rmi_i2c_xport {
> > u8 *tx_buf;
> > size_t tx_buf_size;
> >+
> >+ struct regulator_bulk_data supplies[2];
> >+ u32 startup_delay;
> > };
> > #define RMI_PAGE_SELECT_REGISTER 0xff
> >@@ -246,6 +251,24 @@ static int rmi_i2c_probe(struct i2c_client *client,
> > return -ENODEV;
> > }
> >+ rmi_i2c->supplies[0].supply = "vdd";
> >+ rmi_i2c->supplies[1].supply = "vio";
> >+ retval = devm_regulator_bulk_get(&client->dev,
> >+ ARRAY_SIZE(rmi_i2c->supplies),
> >+ rmi_i2c->supplies);
> >+ if (retval < 0)
> >+ return retval;
> >+
> >+ retval = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies),
> >+ rmi_i2c->supplies);
> >+ if (retval < 0)
> >+ return retval;
> >+
> >+ of_property_read_u32(client->dev.of_node, "syna,startup-delay-ms",
> >+ &rmi_i2c->startup_delay);
> >+
> >+ msleep(rmi_i2c->startup_delay);
> >+
> > rmi_i2c->client = client;
> > mutex_init(&rmi_i2c->page_mutex);
> >@@ -286,6 +309,7 @@ static int rmi_i2c_remove(struct i2c_client *client)
> > struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
> > rmi_unregister_transport_device(&rmi_i2c->xport);
> >+ regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
> >rmi_i2c->supplies);
> > return 0;
> > }
> >@@ -308,6 +332,9 @@ static int rmi_i2c_suspend(struct device *dev)
> > dev_warn(dev, "Failed to enable irq for wake: %d\n",
> > ret);
> > }
> >+
> >+ regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
> >rmi_i2c->supplies);
> >+
> > return ret;
> > }
> >@@ -317,6 +344,12 @@ static int rmi_i2c_resume(struct device *dev)
> > struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
> > int ret;
> >+ ret = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies),
> >rmi_i2c->supplies);
> >+ if (ret)
> >+ return ret;
> >+
> >+ msleep(rmi_i2c->startup_delay);
> >+
> > enable_irq(rmi_i2c->irq);
> > if (device_may_wakeup(&client->dev)) {
> > ret = disable_irq_wake(rmi_i2c->irq);
> >@@ -346,6 +379,8 @@ static int rmi_i2c_runtime_suspend(struct device *dev)
> > disable_irq(rmi_i2c->irq);
> >+ regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
> >rmi_i2c->supplies);
> >+
> > return 0;
> > }
> >@@ -355,6 +390,12 @@ static int rmi_i2c_runtime_resume(struct device *dev)
> > struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
> > int ret;
> >+ ret = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies),
> >rmi_i2c->supplies);
> >+ if (ret)
> >+ return ret;
> >+
> >+ msleep(rmi_i2c->startup_delay);
> >+
> > enable_irq(rmi_i2c->irq);
> > ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev);
>
--
Dmitry
