Hi Leo,
On 26/02/2016 05:28, Leo Yan wrote:
> This patch adds the L2 cache topology on Hi6220. Hi6220 has two
> clusters, every cluster has 512KiB L2 cache (32KiB x 16 ways).
>
> Signed-off-by: Leo Yan <[email protected]>
> ---
Applied.
Thanks!
Best Regards,
Wei
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index d8b963c..1746d50 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -82,6 +82,7 @@
> device_type = "cpu";
> reg = <0x0 0x0>;
> enable-method = "psci";
> + next-level-cache = <&CLUSTER0_L2>;
> clocks = <&stub_clock 0>;
> operating-points-v2 = <&cpu_opp_table>;
> cooling-min-level = <4>;
> @@ -96,6 +97,7 @@
> device_type = "cpu";
> reg = <0x0 0x1>;
> enable-method = "psci";
> + next-level-cache = <&CLUSTER0_L2>;
> operating-points-v2 = <&cpu_opp_table>;
> cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
> };
> @@ -105,6 +107,7 @@
> device_type = "cpu";
> reg = <0x0 0x2>;
> enable-method = "psci";
> + next-level-cache = <&CLUSTER0_L2>;
> operating-points-v2 = <&cpu_opp_table>;
> cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
> };
> @@ -114,6 +117,7 @@
> device_type = "cpu";
> reg = <0x0 0x3>;
> enable-method = "psci";
> + next-level-cache = <&CLUSTER0_L2>;
> operating-points-v2 = <&cpu_opp_table>;
> cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
> };
> @@ -123,6 +127,7 @@
> device_type = "cpu";
> reg = <0x0 0x100>;
> enable-method = "psci";
> + next-level-cache = <&CLUSTER1_L2>;
> operating-points-v2 = <&cpu_opp_table>;
> cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
> };
> @@ -132,6 +137,7 @@
> device_type = "cpu";
> reg = <0x0 0x101>;
> enable-method = "psci";
> + next-level-cache = <&CLUSTER1_L2>;
> operating-points-v2 = <&cpu_opp_table>;
> cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
> };
> @@ -141,6 +147,7 @@
> device_type = "cpu";
> reg = <0x0 0x102>;
> enable-method = "psci";
> + next-level-cache = <&CLUSTER1_L2>;
> operating-points-v2 = <&cpu_opp_table>;
> cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
> };
> @@ -150,9 +157,18 @@
> device_type = "cpu";
> reg = <0x0 0x103>;
> enable-method = "psci";
> + next-level-cache = <&CLUSTER1_L2>;
> operating-points-v2 = <&cpu_opp_table>;
> cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
> };
> +
> + CLUSTER0_L2: l2-cache0 {
> + compatible = "cache";
> + };
> +
> + CLUSTER1_L2: l2-cache1 {
> + compatible = "cache";
> + };
> };
>
> cpu_opp_table: cpu_opp_table {
>
