On Fri, Feb 5, 2016 at 11:01 AM, Rob Herring <[email protected]> wrote: > On Fri, Feb 5, 2016 at 12:06 PM, John Stultz <[email protected]> wrote: >> This patch adds a dts file to support the Nexus7 2013 >> device. Its based off of the qcom-apq8064-ifc6410.dts >> which is similar hardware. >> >> Also includes some comments and context folded in >> from Vinay Simha BN <[email protected]> >> >> Cc: Rob Herring <[email protected]> >> Cc: Arnd Bergmann <[email protected]> >> Cc: Pawel Moll <[email protected]> >> Cc: Mark Rutland <[email protected]> >> Cc: Ian Campbell <[email protected]> >> Cc: Kumar Gala <[email protected]> >> Cc: Andy Gross <[email protected]> >> Cc: Russell King <[email protected]> >> Cc: Vinay Simha BN <[email protected]> >> Cc: Bjorn Andersson <[email protected]> >> Cc: Stephen Boyd <[email protected]> >> Cc: [email protected] >> Cc: [email protected] >> Signed-off-by: John Stultz <[email protected]> >> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 276 >> +++++++++++++++++++++ >> 2 files changed, 277 insertions(+) >> create mode 100644 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index a4a6d70..5b16715 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -524,6 +524,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ >> qcom-apq8064-cm-qs600.dtb \ >> qcom-apq8064-ifc6410.dtb \ >> qcom-apq8064-sony-xperia-yuga.dtb \ >> + qcom-apq8064-asus-nexus7-flo.dts \ > > s/dts/dtb/ > > You must not be doing "make dtbs".
Gak. You're right. Will fix and resend here. > Acked-by: Rob Herring <[email protected]> thanks! -john
