Version three of the driver for Texas Instruments TMP512/513 sensors.
Thanks again for the review, I think we are getting close. I'm not in an easy
position for now to test the driver without device tree. I can put the required
effort to
Main changes from version 2:
- Remove the neccessity to provide a shunt-resistor value
- Remove max-expected-current-ma configuration and always
use max possible current for calibration
- Make sure calculation during calibration can't overflow
- Add value clamping for DT value and runtime parameters
- Support non DT system
- Move hysteresis from DT to standard attribute
Main changes from version 1:
- Use the with_info API instead of sysfs attributes.
- Remove non-standard attributes and raw value.
- Move settings that were non-standard attributes to
device tree, update documentation as well.
- Fix coding style issues
Eric Tremblay (2):
Add driver for Texas Instruments TMP512/513 sensor chips.
Add DT bindings for TMP513 driver
.../devicetree/bindings/hwmon/tmp513.txt | 33 +
Documentation/hwmon/tmp513.rst | 102 ++
MAINTAINERS | 7 +
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/tmp513.c | 901 ++++++++++++++++++
include/linux/platform_data/tmp513.h | 28 +
7 files changed, 1082 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/tmp513.txt
create mode 100644 Documentation/hwmon/tmp513.rst
create mode 100644 drivers/hwmon/tmp513.c
create mode 100644 include/linux/platform_data/tmp513.h
--
2.17.1
