We are using the PCM-3640 4 port RS-232 Module from Aaeon, www.aaeon.com.tw or advantech With following settings setserial -b /dev/ttyS3 port 0x0208 irq 0x07 uart 16550A ^fourport setserial -b /dev/ttyS4 port 0x0210 irq 0x0B uart 16550A ^fourport setserial -b /dev/ttyS5 port 0x0218 irq 0x0C uart 16550A ^fourport setserial -b /dev/ttyS6 port 0x0220 irq 0x0F uart 16550A ^fourport Regards, Luc [EMAIL PROTECTED] wrote: > Hi all, > > I'm looking for a PC/104 multi-port serial board (4 or 8 port) with Linux > support (either a standard driver included with 2.2.x kernels or custom > driver supplied by the manufacturer). > > Thus far, the only manufacturer I've found with good Linux support is > ConnectTech. If anyone has used an Xtreme/104 board (formerly called > Dflex), I'd appreciate hearing about your experiences. > > If there's interest, I'll mail a summary of the responses I get. > > Thanks in advance. > > -terry > > P.S. Any "guess-timates" on prices would be useful too! -- To unsubscribe from this list, send a message to [EMAIL PROTECTED] with the command "unsubscribe linux-embedded" in the message body. For more information, see <http://waste.org/mail/linux-embedded>.
