Hello,
I am using a SanDisk CompactFlash with Kernel 2.2.10 which works fine.
Now a customer got one which the driver detects as a Hitachi CV 6.1.2:
hda: Hitachi CV 6.1.2, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: Hitachi CV 6.1.2, 46MB w/1kB Cache, CHS=738/4/32
This one starts producing Error messages like this, when issuing a sync
command:
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: unexpected interrupt, status=0xd0, count=1
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: unexpected interrupt, status=0xd0, count=2
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:01 (hda), sector 185
hda: no DRQ after issuing WRITE
hda: status timeout: status=0xd0 { Busy }
hda: drive not ready for command
ide0: unexpected interrupt, status=0xd0, count=3
ide0: reset: success
Any hints?
TIA
Sven
--
|_||_||||| Sven Geggus @ Fraunhofer IITB, Karlsruhe, GERMANY
|_||_||||| Phone: +49 6091-422, Web: http://wsd.iitb.fhg.de/
| | ... Linux powered DATA aquisition and evaluation,
| IITB | embedded systems, combustion engine diagnosis
--
To unsubscribe from this list, send a message to [EMAIL PROTECTED]
with the command "unsubscribe linux-embedded" in the message body.
For more information, see <http://waste.org/mail/linux-embedded>.
