On Feb 20, 2008 5:27 PM, Filippo Argiolas <[EMAIL PROTECTED]> wrote: > > Il giorno mer, 20/02/2008 alle 09.22 +0100, Filippo Argiolas ha scritto: > > Il giorno mer, 20/02/2008 alle 06.10 +0900, Matthew Vermeulen ha > > scritto: > > > Hi all... I'm seeing exactly the same problems everyone else is (log > > > flooding etc) except that I can't seem to get any keys picked by lirc > > > or /dev/input/event7 at all... > > > > Are you sure that the input device is receiving the events? > > Did you try evtest /dev/input/event7? > > Is LIRC properly configured? > > Are you using this file for lircd.conf > > [http://linux.bytesex.org/v4l2/linux-input-layer-lircd.conf]? > > Does irw catch some event? > > I forgot to say to not use irrecord with dev/input driver since it's > thinked to record raw events from remotes and doesn't work with input > devices (usually it ends up with a lircd.conf file that interprets key > press and release as separated events doubling each event). > Just use the proper input-layer-lircd.conf. > > I've got that file all set up, my hardware.conf for lirc is pasted below: # /etc/lirc/hardware.conf # #Chosen Remote Control REMOTE="Compro Videomate U500" REMOTE_MODULES="" REMOTE_DRIVER="devinput" REMOTE_DEVICE="/dev/input/event7" REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf" REMOTE_LIRCD_ARGS=""
#Chosen IR Transmitter TRANSMITTER="None" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Enable lircd START_LIRCD="true" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="true" # Default configuration files for your hardware if any LIRCMD_CONF="" #Forcing noninteractive reconfiguration #If lirc is to be reconfigured by an external application #that doesn't have a debconf frontend available, the noninteractive #frontend can be invoked and set to parse REMOTE and TRANSMITTER #It will then populate all other variables without any user input #If you would like to configure lirc via standard methods, be sure #to leave this set to "false" FORCE_NONINTERACTIVE_RECONFIGURATION="false" START_LIRCMD="" My /etc/lirc/lircd.conf contains the contents of the lircd.conf file you linked to. Like I said previously, the only way I know the thing is seeing keypresses is by looking at dmesg or the syslog - evtest and irw pick up nothing, nor does xev or anything else I know to test with. I think lirc is properly configured, insofar as i can change the device to point to my multimedia keyboard using the devinput driver which can then be picked up by lirc... I do know the actual tuner is receiving the remote keypresses because of the changes to the codes listed in syslog... Hope this helps you (help me ;) ) Cheers, Matt -- Matthew Vermeulen http://www.matthewv.id.au/ MatthewV @ irc.freenode.net
_______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
