Hi there!
The attached patches should add support for zl10313 chip to mt312-driver.
This driver now works for my A700 dvb-s card.
@Jan D. Louw: I used register write logs of your driver to compare them to
mt312 driver. Maybe this driver works also for your Compro card.
01_mt312-fix-22k: Sets the correct diseqc frequency.
02_mt312-var-types: changes data types for read/write functions to u8* instead
of void*.
03_mt312-changable-xtal: Handle xtal freq. and multiplicator in state instead
of hardcoding them
04_mt312-add-zl10313-support.diff: Adds basic support for zl10313
Regards
Matthias
--
Matthias Schwarzott (zzam)
Index: v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
===================================================================
--- v4l-dvb.orig/linux/drivers/media/dvb/frontends/mt312.c
+++ v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
@@ -1,7 +1,8 @@
/*
- Driver for Zarlink VP310/MT312 Satellite Channel Decoder
+ Driver for Zarlink VP310/MT312/ZL10313 Satellite Channel Decoder
Copyright (C) 2003 Andreas Oberritter <[EMAIL PROTECTED]>
+ Copyright (C) 2008 Matthias Schwarzott <[EMAIL PROTECTED]>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -55,6 +56,7 @@ static int debug;
} while (0)
#define MT312_PLL_CLK 10000000UL /* 10 MHz */
+#define MT312_PLL_CLK_10_111 10111000UL /* 10.111 MHz */
static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
u8 *buf, const size_t count)
@@ -264,6 +266,32 @@ static int mt312_initfe(struct dvb_front
return ret;
}
+ switch (state->id) {
+ case ID_ZL10313:
+ /* enable ADC */
+ ret = mt312_writereg(state, GPP_CTRL, 0x80);
+ if (ret < 0)
+ return ret;
+
+ /* for optimal ADC performance according to datasheet */
+ buf[0] = 0x80;
+ buf[1] = 0xB0;
+ ret = mt312_write(state, HW_CTRL, buf, 2);
+ if (ret < 0)
+ return ret;
+
+ /* enable MPEG output */
+ ret = mt312_writereg(state, HW_CTRL, 0x00);
+ if (ret < 0)
+ return ret;
+
+ ret = mt312_writereg(state, MPEG_CTRL, 0x00);
+ if (ret < 0)
+ return ret;
+
+ break;
+ }
+
/* SYS_CLK */
buf[0] = mt312_div(state->xtal * state->freq_mult * 2, 1000000);
@@ -278,21 +306,28 @@ static int mt312_initfe(struct dvb_front
if (ret < 0)
return ret;
- ret = mt312_writereg(state, OP_CTRL, 0x53);
- if (ret < 0)
- return ret;
+ switch (state->id) {
+ case ID_VP310:
+ case ID_MT312:
+ /* this code seems to prevent zl10313 from delivering useful data */
- /* TS_SW_LIM */
- buf[0] = 0x8c;
- buf[1] = 0x98;
+ ret = mt312_writereg(state, OP_CTRL, 0x53);
+ if (ret < 0)
+ return ret;
- ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf));
- if (ret < 0)
- return ret;
+ /* TS_SW_LIM */
+ buf[0] = 0x8c;
+ buf[1] = 0x98;
- ret = mt312_writereg(state, CS_SW_LIM, 0x69);
- if (ret < 0)
- return ret;
+ ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf));
+ if (ret < 0)
+ return ret;
+
+ ret = mt312_writereg(state, CS_SW_LIM, 0x69);
+ if (ret < 0)
+ return ret;
+ break;
+ }
return 0;
}
@@ -321,6 +356,9 @@ static int mt312_send_master_cmd(struct
if (ret < 0)
return ret;
+ /* is this needed? */
+ msleep(100);
+
/* set DISEQC_MODE[2:0] to zero if a return message is expected */
if (c->msg[0] & 0x02) {
ret = mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40));
@@ -492,6 +530,9 @@ static int mt312_set_frontend(struct dvb
int ret;
u8 buf[5], config_val;
u16 sr;
+ u32 real_frequency;
+ s16 foffset = 0;
+ s8 fr_off;
const u8 fec_tab[10] =
{ 0x00, 0x01, 0x02, 0x04, 0x3f, 0x08, 0x10, 0x20, 0x3f, 0x3f };
@@ -549,6 +590,7 @@ static int mt312_set_frontend(struct dvb
break;
case ID_MT312:
+ case ID_ZL10313:
break;
default:
@@ -561,6 +603,20 @@ static int mt312_set_frontend(struct dvb
fe->ops.i2c_gate_ctrl(fe, 0);
}
+#if 0
+ // should a demod handle this - or a tune algo call demod functions?
+ if (state->id == ID_ZL10313 && fe->ops.tuner_ops.get_frequency) {
+ fe->ops.tuner_ops.get_frequency(fe, &real_frequency);
+ foffset = p->frequency - real_frequency;
+ fr_off = foffset / 32;
+ dprintk("%s: Foffset %d -> %i\n", __FUNCTION__,
+ foffset, fr_off);
+ ret = mt312_writereg(state, FR_OFF, fr_off);
+ if (ret < 0)
+ return ret;
+ }
+#endif
+
/* sr = (u16)(sr * 256.0 / 1000000.0) */
sr = mt312_div(p->u.qpsk.symbol_rate * 4, 15625);
@@ -614,11 +670,25 @@ static int mt312_i2c_gate_ctrl(struct dv
{
struct mt312_state *state = fe->demodulator_priv;
- if (enable) {
- return mt312_writereg(state, GPP_CTRL, 0x40);
- } else {
- return mt312_writereg(state, GPP_CTRL, 0x00);
- }
+ u8 val = 0x00;
+ int ret;
+
+ ret = mt312_readreg(state, GPP_CTRL, &val);
+ if (ret < 0)
+ goto error;
+
+ /* just preserver this bit for now */
+// val &= 0x80;
+
+ if (enable)
+ val |= 0x40;
+ else
+ val &= ~0x40;
+
+ ret = mt312_writereg(state, GPP_CTRL, val);
+
+error:
+ return ret;
}
static int mt312_sleep(struct dvb_frontend *fe)
@@ -632,6 +702,18 @@ static int mt312_sleep(struct dvb_fronte
if (ret < 0)
return ret;
+ if (state->id == ID_ZL10313) {
+ /* reset ADC */
+ ret = mt312_writereg(state, GPP_CTRL, 0x00);
+ if (ret < 0)
+ return ret;
+
+ /* shutdown ADCs and set mpeg bus to tristated */
+ ret = mt312_writereg(state, HW_CTRL, 0x0d);
+ if (ret < 0)
+ return ret;
+ }
+
ret = mt312_readreg(state, CONFIG, &config);
if (ret < 0)
return ret;
@@ -675,6 +757,7 @@ static struct dvb_frontend_ops vp310_mt3
FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
FE_CAN_RECOVER
+ //| FE_CAN_INVERSION_AUTO
},
.release = mt312_release,
@@ -733,8 +816,13 @@ struct dvb_frontend *vp310_mt312_attach(
state->xtal = MT312_PLL_CLK;
state->freq_mult = 6;
break;
+ case ID_ZL10313:
+ strcpy(state->frontend.ops.info.name, "Zarlink ZL10313 DVB-S");
+ state->xtal = MT312_PLL_CLK_10_111;
+ state->freq_mult = 9;
+ break;
default:
- printk(KERN_WARNING "Only Zarlink VP310/MT312"
+ printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313"
" are supported chips.\n");
goto error;
}
@@ -750,7 +838,7 @@ EXPORT_SYMBOL(vp310_mt312_attach);
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-MODULE_DESCRIPTION("Zarlink VP310/MT312 DVB-S Demodulator driver");
+MODULE_DESCRIPTION("Zarlink VP310/MT312/ZL10313 DVB-S Demodulator driver");
MODULE_AUTHOR("Andreas Oberritter <[EMAIL PROTECTED]>");
MODULE_LICENSE("GPL");
Index: v4l-dvb/linux/drivers/media/dvb/frontends/mt312_priv.h
===================================================================
--- v4l-dvb.orig/linux/drivers/media/dvb/frontends/mt312_priv.h
+++ v4l-dvb/linux/drivers/media/dvb/frontends/mt312_priv.h
@@ -110,6 +110,8 @@ enum mt312_reg_addr {
VIT_ERRPER_H = 83,
VIT_ERRPER_M = 84,
VIT_ERRPER_L = 85,
+ HW_CTRL = 84, /* ZL10313 only */
+ MPEG_CTRL = 85, /* ZL10313 only */
VIT_SETUP = 86,
VIT_REF0 = 87,
VIT_REF1 = 88,
@@ -156,7 +158,8 @@ enum mt312_reg_addr {
enum mt312_model_id {
ID_VP310 = 1,
- ID_MT312 = 3
+ ID_MT312 = 3,
+ ID_ZL10313 = 5,
};
#endif /* DVB_FRONTENDS_MT312_PRIV */
Index: v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
===================================================================
--- v4l-dvb.orig/linux/drivers/media/dvb/frontends/mt312.c
+++ v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
@@ -43,7 +43,8 @@ struct mt312_state {
struct dvb_frontend frontend;
u8 id;
- u8 frequency;
+ unsigned long xtal;
+ u8 freq_mult;
};
static int debug;
@@ -53,8 +54,6 @@ static int debug;
printk(KERN_DEBUG "mt312: " args); \
} while (0)
-#define MT312_SYS_CLK 90000000UL /* 90 MHz */
-#define MT312_LPOWER_SYS_CLK 60000000UL /* 60 MHz */
#define MT312_PLL_CLK 10000000UL /* 10 MHz */
static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
@@ -209,7 +208,7 @@ static int mt312_get_symbol_rate(struct
dprintk("sym_rat_op=%d dec_ratio=%d\n",
sym_rat_op, dec_ratio);
dprintk("*sr(manual) = %lu\n",
- (((MT312_PLL_CLK * 8192) / (sym_rat_op + 8192)) *
+ (((state->xtal * 8192) / (sym_rat_op + 8192)) *
2) - dec_ratio);
}
@@ -242,7 +241,7 @@ static int mt312_initfe(struct dvb_front
/* wake up */
ret = mt312_writereg(state, CONFIG,
- (state->frequency == 60 ? 0x88 : 0x8c));
+ (state->freq_mult == 6 ? 0x88 : 0x8c));
if (ret < 0)
return ret;
@@ -266,11 +265,10 @@ static int mt312_initfe(struct dvb_front
}
/* SYS_CLK */
- buf[0] = mt312_div((state->frequency == 60 ? MT312_LPOWER_SYS_CLK :
- MT312_SYS_CLK) * 2, 1000000);
+ buf[0] = mt312_div(state->xtal * state->freq_mult * 2, 1000000);
/* DISEQC_RATIO */
- buf[1] = mt312_div(MT312_PLL_CLK, 22000 * 4);
+ buf[1] = mt312_div(state->xtal, 22000 * 4);
ret = mt312_write(state, SYS_CLK, buf, sizeof(buf));
if (ret < 0)
@@ -532,17 +530,17 @@ static int mt312_set_frontend(struct dvb
return ret;
if (p->u.qpsk.symbol_rate >= 30000000) {
/* Note that 30MS/s should use 90MHz */
- if ((config_val & 0x0c) == 0x08) {
+ if (state->freq_mult == 6) {
/* We are running 60MHz */
- state->frequency = 90;
+ state->freq_mult = 9;
ret = mt312_initfe(fe);
if (ret < 0)
return ret;
}
} else {
- if ((config_val & 0x0c) == 0x0C) {
+ if (state->freq_mult == 9) {
/* We are running 90MHz */
- state->frequency = 60;
+ state->freq_mult = 6;
ret = mt312_initfe(fe);
if (ret < 0)
return ret;
@@ -661,6 +659,7 @@ static void mt312_release(struct dvb_fro
kfree(state);
}
+#define MT312_SYS_CLK 90000000UL /* 90 MHz */
static struct dvb_frontend_ops vp310_mt312_ops = {
.info = {
@@ -668,8 +667,8 @@ static struct dvb_frontend_ops vp310_mt3
.type = FE_QPSK,
.frequency_min = 950000,
.frequency_max = 2150000,
- .frequency_stepsize = (MT312_PLL_CLK / 1000) / 128,
- .symbol_rate_min = MT312_SYS_CLK / 128,
+ .frequency_stepsize = (MT312_PLL_CLK / 1000) / 128, /* FIXME: adjust freq to real used xtal */
+ .symbol_rate_min = MT312_SYS_CLK / 128, /* FIXME as above */
.symbol_rate_max = MT312_SYS_CLK / 2,
.caps =
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
@@ -726,11 +725,13 @@ struct dvb_frontend *vp310_mt312_attach(
switch (state->id) {
case ID_VP310:
strcpy(state->frontend.ops.info.name, "Zarlink VP310 DVB-S");
- state->frequency = 90;
+ state->xtal = MT312_PLL_CLK;
+ state->freq_mult = 9;
break;
case ID_MT312:
strcpy(state->frontend.ops.info.name, "Zarlink MT312 DVB-S");
- state->frequency = 60;
+ state->xtal = MT312_PLL_CLK;
+ state->freq_mult = 6;
break;
default:
printk(KERN_WARNING "Only Zarlink VP310/MT312"
Corrects the frequency of the
emitted diseqc signal to 22kHz.
Signed-off-by: Matthias Schwarzott <[EMAIL PROTECTED]>
Index: v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
===================================================================
--- v4l-dvb.orig/linux/drivers/media/dvb/frontends/mt312.c
+++ v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
@@ -270,7 +270,7 @@ static int mt312_initfe(struct dvb_front
MT312_SYS_CLK) * 2, 1000000);
/* DISEQC_RATIO */
- buf[1] = mt312_div(MT312_PLL_CLK, 15000 * 4);
+ buf[1] = mt312_div(MT312_PLL_CLK, 22000 * 4);
ret = mt312_write(state, SYS_CLK, buf, sizeof(buf));
if (ret < 0)
Index: v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
===================================================================
--- v4l-dvb.orig/linux/drivers/media/dvb/frontends/mt312.c
+++ v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
@@ -58,7 +58,7 @@ static int debug;
#define MT312_PLL_CLK 10000000UL /* 10 MHz */
static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
- void *buf, const size_t count)
+ u8 *buf, const size_t count)
{
int ret;
struct i2c_msg msg[2];
@@ -84,7 +84,7 @@ static int mt312_read(struct mt312_state
int i;
dprintk("R(%d):", reg & 0x7f);
for (i = 0; i < count; i++)
- printk(" %02x", ((const u8 *) buf)[i]);
+ printk(" %02x", buf[i]);
printk("\n");
}
@@ -92,7 +92,7 @@ static int mt312_read(struct mt312_state
}
static int mt312_write(struct mt312_state *state, const enum mt312_reg_addr reg,
- const void *src, const size_t count)
+ const u8 *src, const size_t count)
{
int ret;
u8 buf[count + 1];
@@ -102,7 +102,7 @@ static int mt312_write(struct mt312_stat
int i;
dprintk("W(%d):", reg & 0x7f);
for (i = 0; i < count; i++)
- printk(" %02x", ((const u8 *) src)[i]);
+ printk(" %02x", src[i]);
printk("\n");
}
@@ -463,7 +463,7 @@ static int mt312_read_snr(struct dvb_fro
int ret;
u8 buf[2];
- ret = mt312_read(state, M_SNR_H, &buf, sizeof(buf));
+ ret = mt312_read(state, M_SNR_H, buf, sizeof(buf));
if (ret < 0)
return ret;
@@ -478,7 +478,7 @@ static int mt312_read_ucblocks(struct dv
int ret;
u8 buf[2];
- ret = mt312_read(state, RS_UBC_H, &buf, sizeof(buf));
+ ret = mt312_read(state, RS_UBC_H, buf, sizeof(buf));
if (ret < 0)
return ret;
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
