Hi!
I just bought a new USB DVB-T Stick (at Conrad, Germany), the name on
the package is WinTV NOVA-T-CE. On the box there is a label which says
'Model 337G', it is put on top of the old 'MODEL 337' mark. I thought it
would work out of the box but I realized that the product id is not
0x7050 or 0x7060 (which seem to be supported) but 0x7070. So the stick
is not recognized by the kernel - no drivers are being loaded.
So i tried to tweak the kernel drivers a little (just changed the ID of
HAUPPAUGE_NOVA_T_STICK_2 from 0x7060 to 0x7070). When i plug in my stick
then the driver gets loaded, and the firmware gets uploaded. But the
syslog tells me that there is no frontend to attach to... So it seems
not that easy to get it running :-(
See my syslog:
Dec 1 19:40:12 kernel: [ 160.188000] usb 4-1: new high speed USB
device using ehci_hcd and address 4
Dec 1 19:40:13 NetworkManager: <debug> [1196534413.171734]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_2040_7070_4030940730').
Dec 1 19:40:13 kernel: [ 160.320000] usb 4-1: configuration #1 chosen
from 1 choice
Dec 1 19:40:13 kernel: [ 160.776000] dib0700: loaded with support for
2 different device-types
Dec 1 19:40:13 kernel: [ 160.776000] dvb-usb: found a 'Hauppauge
Nova-T Stick' in cold state, will try to load a firmware
Dec 1 19:40:13 kernel: [ 160.868000] dvb-usb: downloading firmware
from file 'dvb-usb-dib0700-01.fw'
Dec 1 19:40:13 kernel: [ 161.064000] dib0700: firmware started
successfully.
Dec 1 19:40:14 kernel: [ 161.568000] dvb-usb: found a 'Hauppauge
Nova-T Stick' in warm state.
Dec 1 19:40:14 kernel: [ 161.568000] dvb-usb: will pass the complete
MPEG2 transport stream to the software demuxer.
Dec 1 19:40:14 kernel: [ 161.568000] DVB: registering new adapter
(Hauppauge Nova-T Stick).
Dec 1 19:40:14 NetworkManager: <debug> [1196534414.529724]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_2040_7070_4030940730_if0').
Dec 1 19:40:14 NetworkManager: <debug> [1196534414.544540]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_2040_7070_4030940730_dvb').
Dec 1 19:40:14 NetworkManager: <debug> [1196534414.555017]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_2040_7070_4030940730_dvb_0').
Dec 1 19:40:14 NetworkManager: <debug> [1196534414.559058]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_2040_7070_4030940730_dvb_1').
Dec 1 19:40:14 kernel: [ 161.760000] dvb-usb: no frontend was
attached by 'Hauppauge Nova-T Stick'
Dec 1 19:40:14 kernel: [ 161.760000] dvb-usb: Hauppauge Nova-T Stick
successfully initialized and connected.
Dec 1 19:40:14 kernel: [ 161.760000] usbcore: registered new
interface driver dvb_usb_dib0700
See my 'lsusb -v' output:
Bus 004 Device 004: ID 2040:7070 Hauppauge
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2040 Hauppauge
idProduct 0x7070
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Does anyone know this hardware? Did anyone get it running or is someone
working on new drivers?
I could help out with some infos, if you need more!
Thank you! Bye,
Sebastian.
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
