Hi, M A! you might be better off on the video4linux-list to meet people with such cards.
Am Montag, den 19.11.2007, 20:57 -0800 schrieb M A: > I have a fedora 5 box running fedora 5 (kernel 2.6.18-1.2257.fc5) and mythtv. > I recently got a ADS PTV 305 tv tuner card (as part of ADS MCE 3000 media > kit) which I installed on my computer. > I am able to get the picture (there is a crossweave like patter though) but > no sound. > So my questions are : > > 1) I can not get sound working on it > - Do I need to attach a audio cable from some jumper to motherboard (I have > onboard audio). ? Will 'cd in' port work or I need to install a separate > sound > card which has 'aux in'. I tried v4l2-ctl -d 1 > -f 61.25 --set-ctrl=mute=0 command but still can't get the sound (without > cable). We have reports that analog sound works connected from J3 on the board. If to CD-in or AUX-in doesn't make a difference, except for the mixer controls. However, cx88-alsa is supported too. > 2) Any way to get better picture ? This card is supposed to have hardware > encoding (??) but my cpu usage (1.6Ghz intel with 512 MB RAM) is about 50% > when watching live TV. Most of it is from mythbackend. Is it actually using > hardware encoding ? Better picture, this goes on since years, but to adjust the minor controls is all. On analog video, which has by far the highest throughput, it depends on formats, size, deinterlacing etc. You have to know what you are doing. The mpeg encoder needs firmware. If you start a simple TV app on /dev/video0 and then "cat /dev/video1 > my_high_load_;).mpg, you should see the difference. The 2.6.18 was a good kernel, but you might consider to come a little bit up, the guys have been working on it. If trying to use the v4l-dvb master mercurial, take Mike's current warnings into account for that tuner. The radio likely doesn't work yet, can't tell for the other analog inputs offhand. Hermann > > Here is my dmesg output > > > [EMAIL PROTECTED] ~]# dmesg | grep cx > cx2388x alsa driver version 0.0.6 loaded > CORE cx88[0]: subsystem: 1421:0305, board: KWorld HardwareMpegTV XPert > [card=45,insmod option] > cx2388x v4l2 driver version 0.0.6 loaded > cx88[0]/1: CX88x/0: ALSA support for cx2388x boards > cx88[0]/0: found at 0000:02:0a.0, rev: 5, irq: 177, latency: 32, mmio: > 0xdc000000 > tuner 1-004b: chip found @ 0x96 (cx88[0]) > cx88[0]/0: registered device video0 [v4l2] > cx88[0]/0: registered device vbi0 > cx88[0]/0: registered device radio0 > cx2388x blackbird driver version 0.0.6 loaded > cx88[0]/2: found at 0000:02:0a.2, rev: 5, irq: 177, latency: 32, mmio: > 0xde000000 > cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design) > cx88[0]/2: registered device video1 [mpeg] > cx2388x dvb driver version 0.0.6 loaded > > > > [EMAIL PROTECTED] ~]# dmesg | grep tuner > TV tuner 54 at 0x1fe, Radio tuner -1 at 0x1fe > tuner 1-004b: chip found @ 0x96 (cx88[0]) > tuner 1-004b: setting tuner address to 61 > tuner 1-004b: type set to tda8290+75 > > > > Can anyone help ? Will really appreciate any help/pointer. > > Regards > M A > _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
