Hi!
I recently bought a SATELCO EasyWatch PCI (DVB-C) card.
http://www.satelco.de/htm/shop/easywatch_pci/index.htm
lspci:
02:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Unknown device 1894:002a
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at feafe000 (32-bit, non-prefetchable) [size=512]
Its a saa7146 with TDA10021 frontend, so i just added some #define and
case: for the appropriate pci-id.
Don´t know if its all correct, but it works pretty good here.
--- linux/drivers/media/dvb/ttpci/budget-av.c Wed Sep 20 05:42:06 2006
+++ /usr/src/linux/drivers/media/dvb/ttpci/budget-av.c Fri Oct 6
11:57:49 2006
@@ -1051,6 +1051,7 @@
#define SUBID_DVBS_TV_STAR_CI 0x0016
#define SUBID_DVBS_EASYWATCH_1 0x001a
#define SUBID_DVBS_EASYWATCH 0x001e
+#define SUBID_DVBC_EASYWATCH 0x002a
#define SUBID_DVBC_KNC1 0x0020
#define SUBID_DVBC_KNC1_PLUS 0x0021
#define SUBID_DVBC_CINERGY1200 0x1156
@@ -1089,7 +1090,8 @@
case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBC_KNC1_PLUS:
case SUBID_DVBT_KNC1_PLUS:
- saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
+ case SUBID_DVBC_EASYWATCH:
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
break;
}
@@ -1152,6 +1154,7 @@
case SUBID_DVBC_KNC1_PLUS:
case SUBID_DVBC_CINERGY1200:
+ case SUBID_DVBC_EASYWATCH:
budget_av->reinitialise_demod = 1;
fe = tda10021_attach(&philips_cu1216_config,
&budget_av->budget.i2c_adap,
@@ -1387,6 +1390,7 @@
MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light",
BUDGET_TVSTAR);
MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light",
BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewplc, "Satelco Easywatch DVB-C", BUDGET_KNC1CP);
MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
@@ -1404,6 +1408,7 @@
MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
+ MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
