Add the nodes for the UFS PHY and UFS host controller, along with the
ICE used for UFS.
Signed-off-by: Luca Weiss <[email protected]>
---
arch/arm64/boot/dts/qcom/milos.dtsi | 127
+++++++++++++++++++++++++++++++++++-
1 file changed, 124 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/milos.dtsi
b/arch/arm64/boot/dts/qcom/milos.dtsi
index e1a51d43943f..0f69deabb60c 100644
--- a/arch/arm64/boot/dts/qcom/milos.dtsi
+++ b/arch/arm64/boot/dts/qcom/milos.dtsi
@@ -797,9 +797,9 @@ gcc: clock-controller@100000 {
<&sleep_clk>,
<0>, /* pcie_0_pipe_clk */
<0>, /* pcie_1_pipe_clk */
- <0>, /* ufs_phy_rx_symbol_0_clk */
- <0>, /* ufs_phy_rx_symbol_1_clk */
- <0>, /* ufs_phy_tx_symbol_0_clk */
+ <&ufs_mem_phy 0>,
+ <&ufs_mem_phy 1>,
+ <&ufs_mem_phy 2>,
<0>; /* usb3_phy_wrapper_gcc_usb30_pipe_clk */
#clock-cells = <1>;
@@ -1151,6 +1151,127 @@ aggre2_noc: interconnect@1700000 {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ ufs_mem_phy: phy@1d80000 {
+ compatible = "qcom,milos-qmp-ufs-phy";
+ reg = <0x0 0x01d80000 0x0 0x2000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+ <&tcsr TCSR_UFS_CLKREF_EN>;
+ clock-names = "ref",
+ "ref_aux",
+ "qref";
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+
+ power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ufs_mem_hc: ufshc@1d84000 {
+ compatible = "qcom,milos-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+ reg = <0x0 0x01d84000 0x0 0x3000>;
+
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &cnoc_cfg SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "ufs-ddr",
+ "cpu-ufs";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ operating-points-v2 = <&ufs_opp_table>;
+
+ iommus = <&apps_smmu 0x60 0>;
