Add inline-crypto-engine and UFS bindings & driver parts, then add them to milos dtsi and enable the UFS storage on Fairphone (Gen. 6).
Signed-off-by: Luca Weiss <[email protected]> --- Luca Weiss (6): dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE scsi: ufs: qcom,sc7180-ufshc: dt-bindings: Document the Milos UFS Controller dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the Milos QMP UFS PHY phy: qcom-qmp-ufs: Add Milos support arm64: dts: qcom: milos: Add UFS nodes arm64: dts: qcom: milos-fairphone-fp6: Enable UFS .../bindings/crypto/qcom,inline-crypto-engine.yaml | 1 + .../bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 2 + .../devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml | 2 + arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 18 +++ arch/arm64/boot/dts/qcom/milos.dtsi | 127 ++++++++++++++++++++- drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 96 ++++++++++++++++ 6 files changed, 243 insertions(+), 3 deletions(-) --- base-commit: ef1c7b875741bef0ff37ae8ab8a9aaf407dc141c change-id: 20260106-milos-ufs-7bfbd774ca7c Best regards, -- Luca Weiss <[email protected]>
