> On Mon, 18 Jan 2021 at 12:55, Reshetova, Elena > <elena.reshet...@intel.com> wrote: > > > > > On Thu, 14 Jan 2021 at 11:25, Reshetova, Elena > > > <elena.reshet...@intel.com> wrote: > > > > > > > > > > On Mon, Jan 04, 2021 at 08:04:15AM +0000, Reshetova, Elena wrote: > > > > > > > > 2. The OCS ECC HW does not support the NIST P-192 curve. We were > > > planning > > > > > to > > > > > > > > add SW fallback for P-192 in the driver, but the Intel > > > > > > > > Crypto team > > > > > > > > (which, internally, has to approve any code involving > > > > > > > > cryptography) > > > > > > > > advised against it, because they consider P-192 weak. As a > > > > > > > > result, the > > > > > > > > driver is not passing crypto self-tests. Is there any > > > > > > > > possible solution > > > > > > > > to this? Is it reasonable to change the self-tests to only > > > > > > > > test the > > > > > > > > curves actually supported by the tested driver? (not fully > > > > > > > > sure how to > do > > > > > > > > that). > > > > > > > > > > > > > > An additional reason against the P-192 SW fallback is the fact > > > > > > > that it can > > > > > > > potentially trigger unsafe behavior which is not even "visible" > > > > > > > to the end > user > > > > > > > of the ECC functionality. If I request (by my developer mistake) > > > > > > > a P-192 > > > > > > > weaker curve from ECC Keem Bay HW driver, it is much safer to > > > > > > > return a > > > > > > > "not supported" error that proceed behind my back with a SW code > > > > > > > implementation making me believe that I am actually getting a HW- > backed up > > > > > > > functionality (since I don't think there is a way for me to check > > > > > > > that I am > using > > > > > > > SW fallback). > > > > > > > > > > > > Sorry, but if you break the Crypto API requirement then your driver > > > > > > isn't getting merged. > > > > > > > > > > But should not we think what behavior would make sense for good crypto > drivers > > > in > > > > > future? > > > > > As cryptography moves forward (especially for the post quantum era), > > > > > we will > > > have > > > > > lengths for all existing algorithms increased (in addition to having > > > > > a bunch of > new > > > > > ones), > > > > > and we surely should not expect the new generation of HW drivers to > implement > > > > > the old/weaker lengths, so why there the requirement to support them? > > > > > It is > not > > > a > > > > > part of crypto API definition on what bit lengths should be supported, > because it > > > > > cannot be part of API to begin with since it is always changing > > > > > parameter > > > (algorithms > > > > > and attacks > > > > > develop all the time). > > > > > > > > I would really appreciate, if someone helps us to understand here. > > > > Maybe there > is a > > > > correct way to address this, but we just don't see it. The question is > > > > not even > about > > > > this particular crypto driver and the fact whenever it gests merged or > > > > not, but > the > > > > logic of the crypto API subsystem. > > > > > > > > As far as I understand the implementations that are provided by the > > > > specialized > > > drivers > > > > (like our Keem Bay OCS ECC driver example here) have a higher priority > > > > vs. > generic > > > > Implementations that exists in kernel, which makes sense because we > > > > expect > these > > > drivers > > > > (and the security HW they talk to) to provide both more efficient and > > > > more > secure > > > > implementations than a pure SW implementation in kernel can do (even if > > > > it > utilizes > > > special > > > > instructions, like SIMD, AESNI, etc.). However, naturally these drivers > > > > are bound > by > > > > what security HW can do, and if it does not support a certain > > > > size/param of the > > > algorithm > > > > (P-192 curve in our case), it is pointless and wrong for them to > > > > reimplement > what > > > SW is > > > > already doing in kernel, so they should not do so and currently they > > > > re-direct to > > > core kernel > > > > implementation. So far good. > > > > > > > > But now comes my biggest worry is that this redirection as far > > > > as I can see is *internal to driver itself*, i.e. it does a callback to > > > > these core > > > functions from the driver > > > > code, which again, unless I misunderstand smth, leads to the fact that > > > > the end > user > > > gets > > > > P-192 curve ECC implementation from the core kernel that has been > "promoted" > > > to a highest > > > > priority (given that ECC KeemBay driver for example got priority 300 to > > > > begin > with). > > > So, if > > > > we say we have another HW Driver 'Foo', which happens to implement P-192 > > > curves more securely, > > > > but happens to have a lower priority than ECC KeemBay driver, its > implementation > > > would never > > > > be chosen, but core kernel implementation will be used (via SW fallback > internal to > > > ECC Keem > > > > Bay driver). > > > > > > > > > > No, this is incorrect. If you allocate a fallback algorithm in the > > > correct way, the crypto API will resolve the allocation in the usual > > > manner, and select whichever of the remaining implementations has the > > > highest priority (provided that it does not require a fallback > > > itself). > > > > Thank you very much Ard for the important correction here! > > See below if I got it now correctly to the end for the use case in question. > > > > > > > > > Another problem is that for a user of crypto API I don't see a way (and > > > > perhaps I > > > am wrong here) > > > > to guarantee that all my calls to perform crypto operations will end up > > > > being > > > performed on a > > > > security HW I want (maybe because this is the only thing I trust). It > > > > seems to be > > > possible in theory, > > > > but in practice would require careful evaluation of a kernel setup and > > > > a sync > > > between what > > > > end user requests and what driver can provide. Let me try to explain a > > > > potential > > > scenario. > > > > Lets say we had an end user that used to ask for both P-192 and P-384 > > > > curve- > based > > > ECC operations > > > > and let's say we had a driver and security HW that implemented it. The > > > > end user > > > made sure that > > > > this driver implementation is always preferred vs. other existing > implementations. > > > Now, time moves, a new > > > > security HW comes instead that only supports P-384, and the driver now > > > > has > been > > > updated to > > > > support P-192 via the SW fallback (like we are asked now). > > > > Now, how does an end user notice that when it asks for a P-192 based > operations, > > > his operations > > > > are not done in security HW anymore? The only way seems to be > > > > is to know that driver and security HW has been updated, algorithms and > > > > sizes > > > changed, etc. > > > > It might take a while before the end user realizes this and for example > > > > stops > using > > > P-192 altogether, > > > > but what if this silent redirect by the driver actually breaks some > > > > security > > > assumptions (side-channel > > > > resistance being one potential example) made by this end user? The > consequences > > > can be very bad. > > > > You might say: "this is the end user problem to verify this", but > > > > shouldn't we do > > > smth to prevent or > > > > at least indicate such potential issues to them? > > > > > > > > > > I don't think it is possible at the API level to define rules that > > > will always produce the most secure combination of drivers. The > > > priority fields are only used to convey relative performance (which is > > > already semantically murky, given the lack of distinction between > > > hardware with a single queue vs software algorithms that can be > > > executed by all CPUs in parallel). > > > > > > When it comes to comparative security, trustworthiness or robustness > > > of implementations, it is simply left up to the user to blacklist > > > modules that they prefer not to use. When fallback allocations are > > > made in the correct way, the remaining available implementations will > > > be used in priority order. > > > > So, let me see if I understand the full picture correctly now and how to > > utilize > > the blacklisting of modules as a user. Suppose I want to blacklist > > everything but > > my OSC driver module. So, if I am as a user refer to a specific driver > implementation > > using a unique driver name (ecdh-keembay-ocs in our case), then regardless > > of the > > fact that a driver implements this SW fallback for P-192 curve, if I am as > > a user to > > ask for P-192 curve (or any other param that results in SW fallback), I > > will be > notified > > that this requested implementation does not provide it? > > > > This is rather unusual compared with how the crypto API is typically > used,
The interesting part here is that I think the use case I am describing is pretty generic, it is strange to see why noone has raised this before. One would think that this is the purpose of having these more secure crypto HW implementations supported via drivers to make sure that the users that care about high-grade security actually get what they expect and the risk of mistakes is minimized. but if this is really what you want to implement, you can do so > by: > - having a "ecdh" implementation that implements the entire range, and > uses a fallback for curves that it does not implement > - export the same implementation again as "ecdh" and with a known > driver name "ecdh-keembay-ocs", but with a slightly lower priority, > and in this case, return an error when the unimplemented curve is > requested. > > That way, you fully adhere to the API, by providing implementations of > all curves by default. And if a user requests "ecdh-keembay-ocs" > explicitly, it will not be able to use the P192 curve inadvertently. Thank you very much Ard for this explanation! We will see how such implementation definition would look in practice first before thinking on the way to proceed. It might end up looking strange and confusing, and if so, it would at the end destroy the original idea to make "it simple and secure for the driver users to use the provided functionality". I have not seen this being done at all before at any existing crypto drivers, that's why I was thinking this is not supported to begin with. > > But policing which curves are secure and which are not is really not > the job of the API. We have implementations of MD5 and RC4 in the > kernel that we would *love* to remove but we simply cannot do so as > long as they are still being used. The same applies to P192: we simply > cannot fail requests for that curve for use cases that were previously > deemed valid. It is perfectly reasonable to omit the implementation > from your hardware, but banning its use outright on the grounds that > is no longer secure conflicts with our requirement not to break > existing use cases. I agree with the above logic. In the light that the crypto API is a toolbox for the crypto and not the security subsystem that aims to make any guarantees on the end security properties it all makes sense. I guess I was only asking if this toolbox can help its users to minimize potential mistakes and be configurable enough to support different usage scenarios. But if the above works, I guess it supports it, just hope the end declaration is not too messy to create other (different) usage problems. Best Regards, Elena.