On Thu, Aug 27, 2020 at 08:00:27PM +0200, Martin Cerveny wrote:
> V3S contains crypto engine that is compatible with "sun4i-ss".
>
> Tested-by: Martin Cerveny <m.cerv...@computer.org>
> Signed-off-by: Martin Cerveny <m.cerv...@computer.org>
> ---
> .../bindings/crypto/allwinner,sun4i-a10-crypto.yaml | 5 ++++-
> arch/arm/boot/dts/sun8i-v3s.dtsi | 10 ++++++++++
> drivers/crypto/allwinner/sun4i-ss/sun4i-ss-core.c | 7 +++++++
> 3 files changed, 21 insertions(+), 1 deletion(-)
>
> diff --git
> a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
> b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
> index fc823572b..180efd13a 100644
> --- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
> +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
> @@ -25,6 +25,7 @@ properties:
> - const: allwinner,sun4i-a10-crypto
> - items:
> - const: allwinner,sun8i-a33-crypto
> + - const: allwinner,sun8i-v3s-crypto
>
> reg:
> maxItems: 1
> @@ -59,7 +60,9 @@ if:
> properties:
> compatible:
> contains:
> - const: allwinner,sun6i-a31-crypto
> + oneOf:
> + - const: allwinner,sun6i-a31-crypto
> + - const: allwinner,sun8i-v3s-crypto
>
> then:
> required:
> diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi
> b/arch/arm/boot/dts/sun8i-v3s.dtsi
> index e5312869c..4fec84c40 100644
> --- a/arch/arm/boot/dts/sun8i-v3s.dtsi
> +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
> @@ -234,6 +234,16 @@
> #size-cells = <0>;
> };
>
> + crypto: crypto@1c15000 {
> + compatible = "allwinner,sun8i-v3s-crypto";
> + reg = <0x01c15000 0x1000>;
> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
> + clock-names = "ahb", "mod";
> + resets = <&ccu RST_BUS_CE>;
> + reset-names = "ahb";
> + };
> +
> usb_otg: usb@1c19000 {
> compatible = "allwinner,sun8i-h3-musb";
> reg = <0x01c19000 0x0400>;
> diff --git a/drivers/crypto/allwinner/sun4i-ss/sun4i-ss-core.c
> b/drivers/crypto/allwinner/sun4i-ss/sun4i-ss-core.c
> index a2b67f7f8..d24496cac 100644
> --- a/drivers/crypto/allwinner/sun4i-ss/sun4i-ss-core.c
> +++ b/drivers/crypto/allwinner/sun4i-ss/sun4i-ss-core.c
> @@ -31,6 +31,10 @@ static const struct ss_variant ss_a33_variant = {
> .sha1_in_be = true,
> };
>
> +static const struct ss_variant ss_v3s_variant = {
> + .sha1_in_be = true,
> +};
> +
> static struct sun4i_ss_alg_template ss_algs[] = {
> { .type = CRYPTO_ALG_TYPE_AHASH,
> .mode = SS_OP_MD5,
> @@ -505,6 +509,9 @@ static const struct of_device_id
> a20ss_crypto_of_match_table[] = {
> { .compatible = "allwinner,sun8i-a33-crypto",
> .data = &ss_a33_variant
> },
> + { .compatible = "allwinner,sun8i-v3s-crypto",
> + .data = &ss_v3s_variant
> + },
> {}
> };
> MODULE_DEVICE_TABLE(of, a20ss_crypto_of_match_table);
> --
> 2.17.1
>
You should split at least drivers/crypto and the dts part, as drivers/crypto
patchs are merged via the cryptodev tree and dts/doc will be merged via the
sunxi tree.
And ideally split patch in 3, the doc, the dts and the crypto.
See how I added the same for A33 in:
https://lore.kernel.org/linux-arm-kernel/20191120152833.20443-1-clabbe.montj...@gmail.com/
Anyway the content is good.
Acked-by: Corentin Labbe <clabbe.montj...@gmail.com>
Thanks
