On August 28th around 11:28AM in some timezone, Tomer Maimon wrote
>Add Nuvoton NPCM BMC Random Number Generator(RNG) driver.
>
>Signed-off-by: Tomer Maimon <tmaimo...@gmail.com>
>---
> drivers/char/hw_random/Kconfig | 13 ++
> drivers/char/hw_random/Makefile | 1 +
> drivers/char/hw_random/npcm-rng.c | 207
>++++++++++++++++++++++++++++++
> 3 files changed, 221 insertions(+)
> create mode 100644 drivers/char/hw_random/npcm-rng.c
>
>diff --git a/drivers/char/hw_random/Kconfig
>b/drivers/char/hw_random/Kconfig
>index 59f25286befe..87a1c30e7958 100644
>--- a/drivers/char/hw_random/Kconfig
>+++ b/drivers/char/hw_random/Kconfig
>@@ -440,6 +440,19 @@ config HW_RANDOM_OPTEE
>
> If unsure, say Y.
>
>+config HW_RANDOM_NPCM
>+ tristate "NPCM Random Number Generator support"
>+ depends on ARCH_NPCM || COMPILE_TEST
>+ default HW_RANDOM
>+ help
>+ This driver provides support for the Random Number
>+ Generator hardware available in Nuvoton NPCM SoCs.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called npcm-rng.
>+
>+ If unsure, say Y.
>+
> endif # HW_RANDOM
>
> config UML_RANDOM
>diff --git a/drivers/char/hw_random/Makefile
>b/drivers/char/hw_random/Makefile
>index 7c9ef4a7667f..17b6d4e6d591 100644
>--- a/drivers/char/hw_random/Makefile
>+++ b/drivers/char/hw_random/Makefile
>@@ -39,3 +39,4 @@ obj-$(CONFIG_HW_RANDOM_MTK) += mtk-rng.o
> obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o
> obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o
> obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
>+obj-$(CONFIG_HW_RANDOM_NPCM) += npcm-rng.o
>diff --git a/drivers/char/hw_random/npcm-rng.c
>b/drivers/char/hw_random/npcm-rng.c
>new file mode 100644
>index 000000000000..5b4b1b6cb362
>--- /dev/null
>+++ b/drivers/char/hw_random/npcm-rng.c
>@@ -0,0 +1,207 @@
>+// SPDX-License-Identifier: GPL-2.0
>+// Copyright (c) 2019 Nuvoton Technology corporation.
>+
>+#include <linux/kernel.h>
>+#include <linux/module.h>
>+#include <linux/io.h>
>+#include <linux/iopoll.h>
>+#include <linux/init.h>
>+#include <linux/random.h>
>+#include <linux/err.h>
>+#include <linux/platform_device.h>
>+#include <linux/hw_random.h>
>+#include <linux/delay.h>
>+#include <linux/of_irq.h>
>+#include <linux/pm_runtime.h>
>+
>+#define NPCM_RNGCS_REG 0x00 /* Control and status register
>*/
>+#define NPCM_RNGD_REG 0x04 /* Data register */
>+#define NPCM_RNGMODE_REG 0x08 /* Mode register */
>+
>+#define NPCM_RNG_CLK_SET_25MHZ GENMASK(4, 3) /* 20-25 MHz */
>+#define NPCM_RNG_DATA_VALID BIT(1)
>+#define NPCM_RNG_ENABLE BIT(0)
>+#define NPCM_RNG_M1ROSEL BIT(1)
>+
>+#define NPCM_RNG_TIMEOUT_POLL 20
>+
>+#define to_npcm_rng(p) container_of(p, struct npcm_rng, rng)
>+
>+struct npcm_rng {
>+ void __iomem *base;
>+ struct hwrng rng;
>+};
>+
>+static int npcm_rng_init(struct hwrng *rng)
>+{
>+ struct npcm_rng *priv = to_npcm_rng(rng);
>+ u32 val;
>+
>+ val = readl(priv->base + NPCM_RNGCS_REG);
>+ val |= NPCM_RNG_ENABLE;
>+ writel(val, priv->base + NPCM_RNGCS_REG);
>+
>+ return 0;
>+}
>+
>+static void npcm_rng_cleanup(struct hwrng *rng)
>+{
>+ struct npcm_rng *priv = to_npcm_rng(rng);
>+ u32 val;
>+
>+ val = readl(priv->base + NPCM_RNGCS_REG);
>+ val &= ~NPCM_RNG_ENABLE;
>+ writel(val, priv->base + NPCM_RNGCS_REG);
>+}
>+
>+static bool npcm_rng_wait_ready(struct hwrng *rng, bool wait)
>+{
>+ struct npcm_rng *priv = to_npcm_rng(rng);
>+ int timeout_cnt = 0;
>+ int ready;
>+
>+ ready = readl(priv->base + NPCM_RNGCS_REG) & NPCM_RNG_DATA_VALID;
You should honor the wait paramter here.
>+ while ((ready == 0) && (timeout_cnt < NPCM_RNG_TIMEOUT_POLL)) {
>+ usleep_range(500, 1000);
>+ ready = readl(priv->base + NPCM_RNGCS_REG) &
>+ NPCM_RNG_DATA_VALID;
>+ timeout_cnt++;
>+ }
>+
>+ return !!ready;
>+}
>+
>+static int npcm_rng_read(struct hwrng *rng, void *buf, size_t max,
>bool wait)
>+{
>+ struct npcm_rng *priv = to_npcm_rng(rng);
>+ int retval = 0;
>+
>+ pm_runtime_get_sync((struct device *)priv->rng.priv);
>+
>+ while (max >= sizeof(u32)) {
>+ if (!npcm_rng_wait_ready(rng, wait))
>+ break;
>+
>+ *(u32 *)buf = readl(priv->base + NPCM_RNGD_REG);
>+ retval += sizeof(u32);
>+ buf += sizeof(u32);
>+ max -= sizeof(u32);
>+ }
>+
>+ pm_runtime_mark_last_busy((struct device *)priv->rng.priv);
>+ pm_runtime_put_sync_autosuspend((struct device *)priv->rng.priv);
>+
>+ return retval || !wait ? retval : -EIO;
So you are doing pm get/put around each rng data sample.
Have you characterized the time to enable to the time to get a sample
and compared to the pm runtime sync parameters?
Do you get any data if you set non-blocking wait above?
>+}
>+
>+static int npcm_rng_probe(struct platform_device *pdev)
>+{
>+ struct npcm_rng *priv;
>+ struct resource *res;
>+ u32 quality;
>+ int ret;
>+
>+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>+ if (!priv)
>+ return -ENOMEM;
>+
>+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>+ priv->base = devm_ioremap_resource(&pdev->dev, res);
>+ if (IS_ERR(priv->base))
>+ return PTR_ERR(priv->base);
>+
>+ priv->rng.name = pdev->name;
>+#ifndef CONFIG_PM
>+ priv->rng.init = npcm_rng_init;
>+ priv->rng.cleanup = npcm_rng_cleanup;
so npcm_rng_init and npcm_rng_cleanup are unused if !CONFIG_PM. No warnings?
>+#endif
>+ priv->rng.read = npcm_rng_read;
>+ priv->rng.priv = (unsigned long)&pdev->dev;
>+ if (of_property_read_u32(pdev->dev.of_node, "quality", &quality))
>+ priv->rng.quality = 1000;
>+ else
>+ priv->rng.quality = quality;
>+
>+ writel(NPCM_RNG_M1ROSEL, priv->base + NPCM_RNGMODE_REG);
>+#ifndef CONFIG_PM
>+ writel(NPCM_RNG_CLK_SET_25MHZ, priv->base + NPCM_RNGCS_REG);
>+#else
>+ writel(NPCM_RNG_CLK_SET_25MHZ | NPCM_RNG_ENABLE,
>+ priv->base + NPCM_RNGCS_REG);
>+#endif
I am assuming these are safe to always set and the clock will
bein range?
Did you test without CONFIG_PM ? Looks like the ifndev should be
ifdef otherwise the enable will never be set.
Can you use a local variable for this value that is chosen by
the config instead of ifdef'ing the code?
>+
>+ ret = devm_hwrng_register(&pdev->dev, &priv->rng);
>+ if (ret) {
>+ dev_err(&pdev->dev, "Failed to register rng device: %d\n",
>+ ret);
>+ return ret;
>+ }
>+
>+ dev_set_drvdata(&pdev->dev, priv);
>+ pm_runtime_set_autosuspend_delay(&pdev->dev, 100);
>+ pm_runtime_use_autosuspend(&pdev->dev);
>+ pm_runtime_enable(&pdev->dev);
>+
>+ dev_info(&pdev->dev, "Random Number Generator Probed\n");
>+
>+ return 0;
>+}
>+
>+static int npcm_rng_remove(struct platform_device *pdev)
>+{
>+ struct npcm_rng *priv = platform_get_drvdata(pdev);
>+
>+ hwrng_unregister(&priv->rng);
>+ pm_runtime_disable(&pdev->dev);
>+ pm_runtime_set_suspended(&pdev->dev);
>+
>+ return 0;
>+}
>+
>+#ifdef CONFIG_PM
>+static int npcm_rng_runtime_suspend(struct device *dev)
>+{
>+ struct npcm_rng *priv = dev_get_drvdata(dev);
>+
>+ npcm_rng_cleanup(&priv->rng);
>+
>+ return 0;
>+}
>+
>+static int npcm_rng_runtime_resume(struct device *dev)
>+{
>+ struct npcm_rng *priv = dev_get_drvdata(dev);
>+
>+ return npcm_rng_init(&priv->rng);
>+}
>+#endif
>+
>+static const struct dev_pm_ops npcm_rng_pm_ops = {
>+ SET_RUNTIME_PM_OPS(npcm_rng_runtime_suspend,
>+ npcm_rng_runtime_resume, NULL)
>+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
>+ pm_runtime_force_resume)
>+};
>+
>+static const struct of_device_id rng_dt_id[] = {
>+ { .compatible = "nuvoton,npcm750-rng", },
>+ {},
>+};
>+MODULE_DEVICE_TABLE(of, rng_dt_id);
>+
>+static struct platform_driver npcm_rng_driver = {
>+ .driver = {
>+ .name = "npcm-rng",
>+ .pm = &npcm_rng_pm_ops,
>+ .owner = THIS_MODULE,
>+ .of_match_table = of_match_ptr(rng_dt_id),
>+ },
>+ .probe = npcm_rng_probe,
>+ .remove = npcm_rng_remove,
>+};
>+
>+module_platform_driver(npcm_rng_driver);
>+
>+MODULE_DESCRIPTION("Nuvoton NPCM Random Number Generator Driver");
>+MODULE_AUTHOR("Tomer Maimon <tomer.mai...@nuvoton.com>");
>+MODULE_LICENSE("GPL v2");
>--
>2.18.0
>
>
