On 6/25/19 6:44 PM, Hook, Gary wrote:
> The error code read from the queue status register is only 6 bits wide,
> but we need to verify its value is within range before indexing the error
> messages. Also, fill out the array with all possible entries so that any
> unexpected error codes are reported as "unknown".
>
> Fixes: 81422badb3907 ("crypto: ccp - Make syslog errors human-readable")
>
> Reported-by: Cfir Cohen <[email protected]>
> Signed-off-by: Gary R Hook <[email protected]>
> ---
> drivers/crypto/ccp/ccp-dev.c | 94
> ++++++++++++++++++++++--------------------
> 1 file changed, 50 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/crypto/ccp/ccp-dev.c b/drivers/crypto/ccp/ccp-dev.c
> index 1b5035d56288..c6853e17cebb 100644
> --- a/drivers/crypto/ccp/ccp-dev.c
> +++ b/drivers/crypto/ccp/ccp-dev.c
> @@ -35,56 +35,62 @@ struct ccp_tasklet_data {
> };
>
> /* Human-readable error strings */
> +#define CCP_MAX_ERROR_CODE 64
> static char *ccp_error_codes[] = {
> "",
> - "ERR 01: ILLEGAL_ENGINE",
> - "ERR 02: ILLEGAL_KEY_ID",
> - "ERR 03: ILLEGAL_FUNCTION_TYPE",
> - "ERR 04: ILLEGAL_FUNCTION_MODE",
> - "ERR 05: ILLEGAL_FUNCTION_ENCRYPT",
> - "ERR 06: ILLEGAL_FUNCTION_SIZE",
> - "ERR 07: Zlib_MISSING_INIT_EOM",
> - "ERR 08: ILLEGAL_FUNCTION_RSVD",
> - "ERR 09: ILLEGAL_BUFFER_LENGTH",
> - "ERR 10: VLSB_FAULT",
> - "ERR 11: ILLEGAL_MEM_ADDR",
> - "ERR 12: ILLEGAL_MEM_SEL",
> - "ERR 13: ILLEGAL_CONTEXT_ID",
> - "ERR 14: ILLEGAL_KEY_ADDR",
> - "ERR 15: 0xF Reserved",
> - "ERR 16: Zlib_ILLEGAL_MULTI_QUEUE",
> - "ERR 17: Zlib_ILLEGAL_JOBID_CHANGE",
> - "ERR 18: CMD_TIMEOUT",
> - "ERR 19: IDMA0_AXI_SLVERR",
> - "ERR 20: IDMA0_AXI_DECERR",
> - "ERR 21: 0x15 Reserved",
> - "ERR 22: IDMA1_AXI_SLAVE_FAULT",
> - "ERR 23: IDMA1_AIXI_DECERR",
> - "ERR 24: 0x18 Reserved",
> - "ERR 25: ZLIBVHB_AXI_SLVERR",
> - "ERR 26: ZLIBVHB_AXI_DECERR",
> - "ERR 27: 0x1B Reserved",
> - "ERR 27: ZLIB_UNEXPECTED_EOM",
> - "ERR 27: ZLIB_EXTRA_DATA",
> - "ERR 30: ZLIB_BTYPE",
> - "ERR 31: ZLIB_UNDEFINED_SYMBOL",
> - "ERR 32: ZLIB_UNDEFINED_DISTANCE_S",
> - "ERR 33: ZLIB_CODE_LENGTH_SYMBOL",
> - "ERR 34: ZLIB _VHB_ILLEGAL_FETCH",
> - "ERR 35: ZLIB_UNCOMPRESSED_LEN",
> - "ERR 36: ZLIB_LIMIT_REACHED",
> - "ERR 37: ZLIB_CHECKSUM_MISMATCH0",
> - "ERR 38: ODMA0_AXI_SLVERR",
> - "ERR 39: ODMA0_AXI_DECERR",
> - "ERR 40: 0x28 Reserved",
> - "ERR 41: ODMA1_AXI_SLVERR",
> - "ERR 42: ODMA1_AXI_DECERR",
> - "ERR 43: LSB_PARITY_ERR",
> + "ILLEGAL_ENGINE",
> + "ILLEGAL_KEY_ID",
> + "ILLEGAL_FUNCTION_TYPE",
> + "ILLEGAL_FUNCTION_MODE",
> + "ILLEGAL_FUNCTION_ENCRYPT",
> + "ILLEGAL_FUNCTION_SIZE",
> + "Zlib_MISSING_INIT_EOM",
> + "ILLEGAL_FUNCTION_RSVD",
> + "ILLEGAL_BUFFER_LENGTH",
> + "VLSB_FAULT",
> + "ILLEGAL_MEM_ADDR",
> + "ILLEGAL_MEM_SEL",
> + "ILLEGAL_CONTEXT_ID",
> + "ILLEGAL_KEY_ADDR",
> + "0xF Reserved",
> + "Zlib_ILLEGAL_MULTI_QUEUE",
> + "Zlib_ILLEGAL_JOBID_CHANGE",
> + "CMD_TIMEOUT",
> + "IDMA0_AXI_SLVERR",
> + "IDMA0_AXI_DECERR",
> + "0x15 Reserved",
> + "IDMA1_AXI_SLAVE_FAULT",
> + "IDMA1_AIXI_DECERR",
> + "0x18 Reserved",
> + "ZLIBVHB_AXI_SLVERR",
> + "ZLIBVHB_AXI_DECERR",
> + "0x1B Reserved",
> + "ZLIB_UNEXPECTED_EOM",
> + "ZLIB_EXTRA_DATA",
> + "ZLIB_BTYPE",
> + "ZLIB_UNDEFINED_SYMBOL",
> + "ZLIB_UNDEFINED_DISTANCE_S",
> + "ZLIB_CODE_LENGTH_SYMBOL",
> + "ZLIB _VHB_ILLEGAL_FETCH",
> + "ZLIB_UNCOMPRESSED_LEN",
> + "ZLIB_LIMIT_REACHED",
> + "ZLIB_CHECKSUM_MISMATCH0",
> + "ODMA0_AXI_SLVERR",
> + "ODMA0_AXI_DECERR",
> + "0x28 Reserved",
> + "ODMA1_AXI_SLVERR",
> + "ODMA1_AXI_DECERR",
> };
>
> void ccp_log_error(struct ccp_device *d, int e)
> {
> - dev_err(d->dev, "CCP error: %s (0x%x)\n", ccp_error_codes[e], e);
> + if (WARN_ON((e < 0) || (e >= CCP_MAX_ERROR_CODE)))
> + return;
The cmd_error variable that is used to call this function is a u32, so you
could just change "e" from int to unsigned int and remove this check. The
below check would be all that is needed.
Thanks,
Tom
> +
> + if (e < ARRAY_SIZE(ccp_error_codes))
> + dev_err(d->dev, "CCP error %d: %s\n", e, ccp_error_codes[e]);
> + else
> + dev_err(d->dev, "CCP error %d: Unknown Error\n", e);
> }
>
> /* List of CCPs, CCP count, read-write access lock, and access functions
>
