Add a module parameter that allows specification of one or more CCPs
based on PCI bus identifiers. The value of the parameter is a comma-
separated list of bus numbers, in no particular order.
Signed-off-by: Gary R Hook <gary.h...@amd.com>
---
drivers/crypto/ccp/sp-pci.c | 58 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/drivers/crypto/ccp/sp-pci.c b/drivers/crypto/ccp/sp-pci.c
index bcd1e233dce7..a563d85b242e 100644
--- a/drivers/crypto/ccp/sp-pci.c
+++ b/drivers/crypto/ccp/sp-pci.c
@@ -40,6 +40,13 @@ static unsigned int pcidev;
module_param(pcidev, uint, 0444);
MODULE_PARM_DESC(pcidev, "Device number for a specific CCP");
+#define MAXCCPS 32
+static char *buses;
+static unsigned int n_pcibus = 0;
+static unsigned int pcibus[MAXCCPS];
+module_param(buses, charp, 0444);
+MODULE_PARM_DESC(buses, "PCI Bus number(s), comma-separated. List CCPs with
'lspci |grep Enc'");
+
static struct mutex devcount_mutex ____cacheline_aligned;
static unsigned int devcount = 0;
static unsigned int maxdev = 0;
@@ -50,6 +57,37 @@ static unsigned int nqueues = MAX_HW_QUEUES;
module_param(nqueues, uint, 0444);
MODULE_PARM_DESC(nqueues, "Number of queues per CCP (default: 5)");
+#define COMMA ','
+static void ccp_parse_pci_buses(void)
+{
+ unsigned int busno;
+ unsigned int eos = 0;
+ int ret;
+ char *comma;
+ char *tok;
+
+ /* Nothing on the command line? */
+ if (!buses)
+ return;
+
+ comma = tok = buses;
+ while (!eos && *tok && (n_pcibus < MAXCCPS)) {
+ while (*comma && *comma != COMMA)
+ comma++;
+ if (*comma == COMMA)
+ *comma = '\0';
+ else
+ eos = 1;
+ ret = kstrtouint(tok, 0, &busno);
+ if (ret) {
+ pr_info("%s: Parsing error (%d) '%s'\n", __func__, ret,
buses);
+ return;
+ }
+ pcibus[n_pcibus++] = busno;
+ tok = ++comma;
+ }
+}
+
#ifdef CONFIG_CRYPTO_DEV_CCP_DEBUGFS
modparam_t moduleparameters[] = {
{"maxdev", &maxdev, S_IRUSR},
@@ -204,6 +242,7 @@ static int sp_pci_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
void __iomem * const *iomap_table;
int bar_mask;
int ret;
+ int j;
if (maxdev && (devcount >= maxdev)) /* Too many devices? */
return 0;
@@ -212,6 +251,25 @@ static int sp_pci_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
if (pcidev && (pdev->device != pcidev))
return 0;
+ /*
+ * Look for (1) a specific device, (2) devices on a certain
+ * bus, or (3) a specific device number. If both parameters
+ * are zero accept any device.
+ */
+ ccp_parse_pci_buses();
+ if (n_pcibus) {
+ int match = 0;
+
+ /* Scan the list of buses for a match */
+ for (j = 0 ; j < n_pcibus ; j++)
+ if (pcibus[j] == pdev->bus->number) {
+ match = 1;
+ break;
+ }
+ if (!match)
+ return 0;
+ }
+
ret = -ENOMEM;
sp = sp_alloc_struct(dev);
if (!sp)
