Hi,
I'm using OpenSwan 2.6.18 with kernel 2.6.26.5 on ARM based system and trying
to run ipsec session with the following connection(ipsec.conf):
conn test
type=tunnel
authby=secret
left=192.168.0.1 # Picks up our dynamic IP
leftsubnet=192.167.0.0/16
right=192.168.1.1 # Remote information
rightsubnet=192.168.1.0/24
auto=route
spi=0x668
esp=3des-sha1 # ESP enc/auth algorithm (3des-md5-96/3des-sha1-96)
espenckey=0x01234567_89abcdef_02468ace_13579bdf_12345678_9abcdef0
espauthkey=0x12345678_9abcdef0_2468ace0_2468ace0_13579bdf
when I start the ipsec service, the following message appears(refer to spi
parameter):
can not load config '/etc/ipsec.conf': /etc/ipsec.conf:46: valid keyword, but
value is not a number [0x668]
Failed to parse config setup portion of ipsec.conf
Did I miss something ?
Thanks,
Eran.
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html