On Mon, Feb 19, 2001 at 01:46:42PM +0100, carniel wrote:
> Hi i have develop a Strong ARM 1110 board derived from LART project with some
>variance
>
> Using Sa-1110 - SDRAM - ethernet board on main board ....
>
> Flash mapped in 0x0
> SDRam bank 0 at 0xC0000000 to 0xC1FFFFFF 16 mbytes
> SDram bank 1 at 0xC8000000 to 0xC9FFFFFF 16 mbytes
> Some VERY VERY VERY eary documentation on this board (shematic ) on
>www.carniel.it
>
> Yes it work but i have some problem ..
>
>
> The precompiled kernel from LART SITE zImage-linux-2.4.0-test8-rmk5-np1-lart Oct
>10, 2000 19:47:07
> works .....
>
> If i try to compile myself the kernel its boot wrinting "Decompressing kernel
>............."
> and hangs ......
CONFIG_ANGELBOOT enabled while you're using Angel to boot the system?
Erik
--
J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department
of Electrical Engineering, Faculty of Information Technology and Systems,
Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands
Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [EMAIL PROTECTED]
WWW: http://www-ict.its.tudelft.nl/~erik/
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
