|
hi, all,
may sa1110/assabet development board can not detect
network device, and my kernel version is 2.4.0-test8-rmk1-np1, do you know what
is the wrong with the system?
following is the dmesg dump from target
board:
config1-- default configuration of
assabet:
Linux version 2.4.0-test8-rmk1-np1 ([EMAIL PROTECTED]) (gcc version 2.95.2
1999100
Processor: Intel StrongARM-1110 revision 8 Architecture: Intel-Assabet On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: keepinitrd Console: colour dummy device 80x30 Calibrating delay loop... 194.15 BogoMIPS Memory: 32MB = 32MB total Memory: 27604KB available (1222K code, 247K data, 64K init) Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 2048 (order: 2, 16384 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 2048) scale: SA-1110 clock scaling initialized, clock speed is 206 MHz Starting kswapd v1.7 Console: switching to colour frame buffer device 40x30 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx RAMDISK: Compressed image found at block 0 SA1100 serial driver version 1.3 ttyS0 on SA1100 UART1 (irq 15) ttyS1 on SA1100 UART3 (irq 17) ttyS2 on SA1100 UART2 (irq 16), using IRDA UDA1341 audio driver initialized Linux PCMCIA Card Services 3.1.20 options: none SA-1100 PCMCIA (CS release 3.1.20) NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com VFS: Mounted root (ext2 filesystem). Freeing init memory: 64K [root@Linux /root]$ config2--a friend configuration:
[root@Linux /root]$dmesg
Linux version 2.4.0-test8-rmk1-np1 ([EMAIL PROTECTED]) (gcc version 2.95.2 1999100 Processor: Intel StrongARM-1110 revision 8 Architecture: Intel-Assabet On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: keepinitrd Console: colour dummy device 80x30 Calibrating delay loop... 194.15 BogoMIPS Memory: 32MB = 32MB total Memory: 27588KB available (1226K code, 252K data, 72K init) Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 2048 (order: 2, 16384 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 2048) scale: SA-1110 clock scaling initialized, clock speed is 206 MHz Starting kswapd v1.7 Console: switching to colour frame buffer device 40x30 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx RAMDISK: Compressed image found at block 0 SA1100 serial driver version 1.3 ttyS0 on SA1100 UART1 (irq 15) ttyS1 on SA1100 UART3 (irq 17) ttyS2 on SA1100 UART2 (irq 16), using IRDA UDA1341 audio driver initialized Linux PCMCIA Card Services 3.1.20 options: none SA-1100 PCMCIA (CS release 3.1.20) IP-Config: No network devices available. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com VFS: Mounted root (ext2 filesystem). Freeing init memory: 72K [root@Linux /root]$ best regards,
Ning.
|
