I recently downloaded blob-kit-assabet-1.1.tar.gz from
ttp://www.cs.cmu.edu/~wearable/software and installed it on my
assabet-neponset system. After configuring the ethernet interface
(a socket LP-E through a Sandisk pc card adapter) I was able
to ping other machines and other machines could ping the assabet.
Unfortunately that was the end of the good news. I can't telnet out
or in, ftp to other systems gets past the login and then dies. Telnet
to smpt and such seems to get in but default telnet hangs after the
advisement about escape. I set /etc/resolv.conf and host lookups
seem to work but are horrendously slow.
I got similar results when I build my own system and installed
it with angelboot.
I am suspecting that I have some kind of hardware problem
so I will ask some questions here:
Has this worked for others?
Did you use the package with or without neponset?
Any constructive/instructive response is appreciated,
--
Mike Coburn
Sys. Admin.
"These are my opinions, and you can't have em" -- Bart Simpson
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
