Hi Tobias, I can help with testing your re-land PR. Unfortunately I can't do it on the buildbot machine itself but I will run it on a similar machine with the same setup and get back to you with the results as soon as they are available.
Thanks! -- Omair Javaid www.linaro.org On Tue, 16 Sept 2025 at 07:57, Tobias Gysi via linaro-toolchain < [email protected]> wrote: > Dear Linaro Team, > > I am looking for advice on how to reproduce a flang-arm64-windows-msvc LLVM > build bot failure. I hope I ended up in the right place here. > > I had to revert a PR (https://github.com/llvm/llvm-project/pull/150783) > that broke the flang-arm64-windows-msvc LLVM build bot in the morning due > to some tablegen-related problem. I did prepare a reland PR ( > https://github.com/llvm/llvm-project/pull/151125) that addresses a > potential issue. However, since I did not see any other build bot failures > and since I was not able to reproduce the problem locally, I wonder if > there is a way to run the build bot on my reland PR? Alternatively, hints > on how to reproduce the problem locally on a x86 Linux machine would be > appreciated. > > Best, > Tobias > > > ---------- Forwarded message --------- > From: LLVM Continuous Integration <[email protected]> > Date: Tue, Jul 29, 2025 at 9:58 AM > Subject: Re: [llvm/llvm-project] [mlir][llvm] Add intrinsic arg and result > attribute support (PR #150783) > To: llvm/llvm-project <[email protected]> > Cc: Tobias Gysi <[email protected]>, State change < > [email protected]> > > > *llvm-ci* left a comment (llvm/llvm-project#150783) > <https://github.com/llvm/llvm-project/pull/150783#issuecomment-3131154498> > > LLVM Buildbot has detected a new failure on builder > flang-arm64-windows-msvc > running on linaro-armv8-windows-msvc-01 while building mlir at step 6 > "test-build-unified-tree-check-mlir". > > Full details are available at: > https://lab.llvm.org/buildbot/#/builders/207/builds/4441 > Here is the relevant piece of the build log for the reference > > Step 6 (test-build-unified-tree-check-mlir) failure: test (failure) > ******************** TEST 'MLIR :: > Dialect/Bufferization/Transforms/one-shot-module-bufferize-analysis.mlir' > FAILED ******************** > Exit Code: 1 > > Command Output (stdout): > -- > # RUN: at line 1 > c:\users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\bin\mlir-opt.exe > > C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\llvm-project\mlir\test\Dialect\Bufferization\Transforms\one-shot-module-bufferize-analysis.mlir > -one-shot-bufferize="bufferize-function-boundaries test-analysis-only" > -split-input-file | > c:\users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\bin\filecheck.exe > > C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\llvm-project\mlir\test\Dialect\Bufferization\Transforms\one-shot-module-bufferize-analysis.mlir > # executed command: > 'c:\users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\bin\mlir-opt.exe' > > 'C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\llvm-project\mlir\test\Dialect\Bufferization\Transforms\one-shot-module-bufferize-analysis.mlir' > '-one-shot-bufferize=bufferize-function-boundaries test-analysis-only' > -split-input-file > # .---command stderr------------ > # | Assertion failed: implArgAndResultAttrsOpInterface && > "`::mlir::CallOpInterface` expected its base interface > `::mlir::ArgAndResultAttrsOpInterface` to be registered", file > > C:/Users/tcwg/llvm-worker/flang-arm64-windows-msvc/build/tools/mlir/include\mlir/Interfaces/CallInterfaces.h.inc, > line 122 > # | PLEASE submit a bug report to > https://github.com/llvm/llvm-project/issues/ and include the crash > backtrace. > # | Stack dump: > # | 0. Program arguments: > > c:\\users\\tcwg\\llvm-worker\\flang-arm64-windows-msvc\\build\\bin\\mlir-opt.exe > > C:\\Users\\tcwg\\llvm-worker\\flang-arm64-windows-msvc\\llvm-project\\mlir\\test\\Dialect\\Bufferization\\Transforms\\one-shot-module-bufferize-analysis.mlir > "-one-shot-bufferize=bufferize-function-boundaries test-analysis-only" > -split-input-file > # | Exception Code: 0xC000001D > # | #0 0x00007ff60737543c > > (c:\users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\bin\mlir-opt.exe+0x1af543c) > # | #1 0x00007ffff958ae50 (C:\WINDOWS\System32\ucrtbase.dll+0x7ae50) > # | #2 0xff61fffff958ba5c > # `----------------------------- > # error: command failed with exit status: 0xc000001d > # executed command: > > 'c:\users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\bin\filecheck.exe' > > 'C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\llvm-project\mlir\test\Dialect\Bufferization\Transforms\one-shot-module-bufferize-analysis.mlir' > # .---command stderr------------ > # | > C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\llvm-project\mlir\test\Dialect\Bufferization\Transforms\one-shot-module-bufferize-analysis.mlir:23:17: > error: CHECK-LABEL: expected string not found in input > # | // CHECK-LABEL: func @extract_slice_fun( > # | ^ > # | <stdin>:1:1: note: scanning from here > # | module { > # | ^ > # | <stdin>:1:3: note: possible intended match here > # | module { > # | ^ > # | > # | Input file: <stdin> > # | Check file: > > C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\llvm-project\mlir\test\Dialect\Bufferization\Transforms\one-shot-module-bufferize-analysis.mlir > # | > # | -dump-input=help explains the following input dump. > # | > # | Input was: > # | <<<<<< > # | 1: module { > # | label:23'0 X~~~~~~~~ error: no match found > # | label:23'1 ? possible intended match > # | 2: } > # | label:23'0 ~~ > # | 3: > # | label:23'0 ~ > # | 4: // ----- > # | label:23'0 ~~~~~~~~~ > # | >>>>>> > # `----------------------------- > # error: command failed with exit status: 1 > ... > Step 7 (test-build-unified-tree-check-flang) failure: test (failure) > ******************** TEST 'Flang :: Intrinsics/math-codegen.fir' > FAILED ******************** > Exit Code: 2 > > Command Output (stdout): > -- > # RUN: at line 1 > split-file > C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\llvm-project\flang\test\Intrinsics\math-codegen.fir > > C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\tools\flang\test\Intrinsics\Output\math-codegen.fir.tmp > # executed command: split-file > > 'C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\llvm-project\flang\test\Intrinsics\math-codegen.fir' > > 'C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\tools\flang\test\Intrinsics\Output\math-codegen.fir.tmp' > # RUN: at line 5 > fir-opt > C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\tools\flang\test\Intrinsics\Output\math-codegen.fir.tmp/abs_fast.fir > --fir-to-llvm-ir="target=x86_64-unknown-linux-gnu" | > c:\users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\bin\filecheck.exe > > C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\tools\flang\test\Intrinsics\Output\math-codegen.fir.tmp/abs_fast.fir > # executed command: fir-opt > > 'C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\tools\flang\test\Intrinsics\Output\math-codegen.fir.tmp/abs_fast.fir' > --fir-to-llvm-ir=target=x86_64-unknown-linux-gnu > # .---command stderr------------ > # | Assertion failed: implArgAndResultAttrsOpInterface && > "`::mlir::CallOpInterface` expected its base interface > `::mlir::ArgAndResultAttrsOpInterface` to be registered", file > > C:/Users/tcwg/llvm-worker/flang-arm64-windows-msvc/build/tools/mlir/include\mlir/Interfaces/CallInterfaces.h.inc, > line 122 > # | PLEASE submit a bug report to > https://github.com/llvm/llvm-project/issues/ and include the crash > backtrace. > # | Stack dump: > # | 0. Program arguments: fir-opt > > C:\\Users\\tcwg\\llvm-worker\\flang-arm64-windows-msvc\\build\\tools\\flang\\test\\Intrinsics\\Output\\math-codegen.fir.tmp/abs_fast.fir > --fir-to-llvm-ir=target=x86_64-unknown-linux-gnu > # | Exception Code: 0xC000001D > # | #0 0x00007ff777271f54 > mlir::detail::FallbackTypeIDResolver::registerImplicitTypeID(class > llvm::StringRef) > > (c:\users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\bin\fir-opt.exe+0x1331f54) > # | #1 0x00007ffff958ae50 (C:\WINDOWS\System32\ucrtbase.dll+0x7ae50) > # | #2 0xdd54fffff958ba5c > # `----------------------------- > # error: command failed with exit status: 0xc000001d > # executed command: > > 'c:\users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\bin\filecheck.exe' > > 'C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\tools\flang\test\Intrinsics\Output\math-codegen.fir.tmp/abs_fast.fir' > # .---command stderr------------ > # | FileCheck error: '<stdin>' is empty. > # | FileCheck command line: > c:\users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\bin\filecheck.exe > > C:\Users\tcwg\llvm-worker\flang-arm64-windows-msvc\build\tools\flang\test\Intrinsics\Output\math-codegen.fir.tmp/abs_fast.fir > # `----------------------------- > # error: command failed with exit status: 2 > > -- > > ******************** > > > > — > Reply to this email directly, view it on GitHub > <https://github.com/llvm/llvm-project/pull/150783#issuecomment-3131154498 > >, > or unsubscribe > < > https://github.com/notifications/unsubscribe-auth/ABW7H2HANJOPE6QLHGYKBD33K4SUFAVCNFSM6AAAAACCN2SND6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTCMZRGE2TINBZHA > > > . > You are receiving this because you modified the open/close state.Message > ID: <llvm/llvm-project/pull/150783/[email protected]> > > -- > This e-mail message and any attachments thereto are intended only for the > person or entity to which it is addressed and may contain confidential > and/or privileged material. Any retransmission, dissemination, copying or > other use of, or taking of any action in reliance upon this information is > prohibited. If you are not the intended addressee, please contact the > sender immediately and delete the materials and information from your > device and system and confirm the deletion by reply e-mail. > _______________________________________________ > linaro-toolchain mailing list -- [email protected] > To unsubscribe send an email to [email protected] > _______________________________________________ linaro-toolchain mailing list -- [email protected] To unsubscribe send an email to [email protected]
