*Hi LINARO-TEAM,*
I would like start a software development on a “Renesas RZ (ARM Cortex-A9) MPU (R7S721010xxx” by using Eclipse IDE (Kepler - 4.3.1). > Global objective = Use free SW development tools I have read, that the “Linaro GCC Toolchain Release Supports Full Range of ARM Cortex-A Processors” and it’s an open source software for the ARM architecture, including the GCC toolchain. > Well – I think that is what I need. So, I have installed the Linaro Toolchain (gcc-arm-none-eabi-4_7-2013q3-20130916-win32.exe) and test the compilation of the “*Hello World ARM C Project*” for the Target Processor “cortex-A9” > So, the compilation is OK. *NOW, I would like prepare a small TEST-Project with FreeRTOS.* FreeRTOSV8.0.0_Release_Candidate_2 > I have found the “Renesas RZ (ARM Cortex-A9) RTOS Demo”: http://www.freertos.org/Renesas_RZ_Cortex-A9-RTOS.html But the two projects are provided to be built with the* IAR Embedded Workbench <http://www.iar.com/ewarm>* or the *ARM DS-5 <http://arm.com/products/tools/software-tools/ds-5/index.php> embedded development tools*. > I have seen that the DS-5 Development Studio is not for free but it use also the Linaro GNU Compiler (GCC) toolchain. So, I have tried to import the “Renesas RZ (ARM Cortex-A9) RTOS Demo” project to Eclipse, *but the import doesn’t work – and I’m not sure that the project uses the Linaro GNU GCC Compiler**.* > I think that Demo project for DS-5 use also special plugins/configuration settings from the Development Studio – so this can’t work ?!… *HELP:* *I’m new in the “Eclipse IDE / Compiler (GCC) toolchain” WORLD … * So, can you help me to give me a good direction - *what I need to do *to make running this small “Blinky-Demo for Renesas RZ (ARM Cortex-A9) with the FreeRTOS” by using the Linaro GCC Toolchain. > Or have you another small Demo project for the Linaro GCC Toolchain which uses the FreeRTOS for the Renesas RZ (ARM Cortex-A9) family? … Or you think that is not easily possible to do that for a Newcomer like me? I hope that you can help me to put me on the right road. Best regards, *Steffen SPRUNGACTIA Automotive* ================= Software Engineer ================= *ACTIA* Automotive 5 Rue Jorge SEMPRUN – BP 74215 31432 TOULOUSE Cedex 4 (FRANCE) Tél.: + 33 (0)5 61 17 68 75 Fax: +33 (0)5 61 55 42 31 Skype: steffen.sprung EMAIL: steffen.spr...@actia.fr ACTIA: http://www.actia.com [image: image001] *P* Avant d’imprimer ce mail, demandez-vous si ceci est nécessaire. Before printing this email, assess if it is really needed.
<<image001.jpg>>
_______________________________________________ linaro-toolchain mailing list linaro-toolchain@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-toolchain
