Hi Michael, On 2 February 2012 02:44, Michael Hope <michael.h...@linaro.org> wrote: > I've set up a new user on my laptop that we can use for experimenting > with benchmarks during Connect. Here's what we've got: > * A user called 'connect' > * Ramana, Ulrich, Åsa, and myself can log in via SSH
works for me . > * bzr repo for trunk, 4.6, and gcc-linaro 4.6 Ack. > * Tarballs of all gcc-linaro 4.4, 4.5, and 4.6 releases > * Tarballs of the recent CSL, Google 4.6, and Android 4.4 compilers > * A sysroot in ~/sysroot > * Cross-binutils etch in ~/cross > * A shared ccache in ~/ccache primed with these > * A ~/env.sh that sets up the right paths etc > * A ~/builds/doconfigure.sh that configures for our standard ARMv7-A > C/C++/Fortran configuration I've put a copy of some of the directory names and info from this mail into a common top level file called README.where just as I was looking around. I've poked around a bit but not tried building anything serious as I wasn't sure if it would affect your laptop in any other way. > * EEMBC, DENBench, and SPEC 2000 under ~/benchmarks I haven't tried running any of these but I presume that should fine. > > The trees under build/ build into build/$ver/build and install into > build/$ver/install. > > The benchmarks are set up to cross build and cross run. I've pulled > ursa2 out of the farm and nuked it, so we can do something like: > make CROSS_COMPILE=arm-linux-gnueabi- RUN="$PWD/sshrun ursa2" Are you carrying ursa2 as well with you or are we running this remotely from connect ? cheers Ramana _______________________________________________ linaro-toolchain mailing list linaro-toolchain@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-toolchain
