Hi Michael,

        By adding -mno-unaligned-access, kernel can start now.

        I've another question, Does this option have some impact on performance?

        Thanks~~

Yours
Terry

-----Original Message-----
From: Michael Hope [mailto:michael.h...@linaro.org] 
Sent: 2012年1月11日 9:16
To: Lv Terry-R65388
Cc: linaro-toolchain@lists.linaro.org
Subject: Re: uImage built with pre-built linaro toolchain failed to start

On Tue, Jan 10, 2012 at 11:58 PM, Lv Terry-R65388 <r65...@freescale.com> wrote:
> Hi,
>
>        I use pre-built version of linaro toolchain (got from 
> http://people.linaro.org/~michaelh/incoming/binaries/) to build a uImage.
>        The build succeeded, but the uImage couldn't start.
>        The console hangs at:
>
> Using FEC0 device
> TFTP from server 10.193.100.158; our IP address is 10.193.102.233 
> Filename 'uImage_linaro'.
> Load address: 0x70800000
> Loading: 
> #################################################################
>         
> #################################################################
>         
> #################################################################
>         #######################
> done
> Bytes transferred = 3193292 (30b9cc hex) ## Booting kernel from Legacy 
> Image at 70800000 ...
>   Image Name:   Linux-2.6.38-01026-gc9c8ead
>   Image Type:   ARM Linux Kernel Image (uncompressed)
>   Data Size:    3193228 Bytes =  3 MB
>   Load Address: 10008000
>   Entry Point:  10008000
>   Verifying Checksum ... OK
>   Loading Kernel Image ... OK
> OK
>
> Starting kernel ...
>
> Uncompressing Linux... done, booting the kernel.
>
>        Does anyone meet this before?
>
>        How can I fix it?
>
>        Thanks~~

Hi Terry.  Andy's covered the most likely causes.  One thing to watch for is 
that Linaro GCC 2011.11 added unaligned access support for armv6k and later.  
This is fine for userspace but the kernel runs with the hardware unaligned 
access fault turned and this might cause the crash.

Try adding -mno-unaligned-access to your CFLAGS and see if that helps.  See:
 http://lists.linaro.org/pipermail/linaro-android/2011-December/000030.html

and:
 http://comments.gmane.org/gmane.linux.ports.arm.kernel/138900

for more.

-- Michael

_______________________________________________
linaro-toolchain mailing list
linaro-toolchain@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-toolchain

Reply via email to