https://bugs.documentfoundation.org/show_bug.cgi?id=151878
--- Comment #8 from Michael <[email protected]> --- OK I installed 7.4. I removed the grey buttons on Kearsarge, and I replaced them with good buttons from Burton Island. Save, close, re-open. Buttons come up as grey. I opened Omaha. I went to the WR_Data sheet, copied the URL in the top corner. (I found you have to do something on the sheet for it to take.) I then went to the Log Page sheet, entered a couple of numbers in the weather area and did a CopyDown. No brief flash of buttons! I did this test several times, and no flash. This is encouraging. I am stopping for my afternoon tea, and then I will start transcribing with my working copy of Omaha. I will do occasional checks to test for flashing buttons. I will also keep an eye out to see if the buttons on the Setup sheet turn black. It happens randomly, and it often takes a few days to show up. White lines. I did a few goes to WR_data, copy a cell, go to the log page, enter a number, do CopyDown and then a Ctrl-Home. I found no flash of buttons when I did the CopyDown however, the situation with the white lines radiating from the buttons were: 1. None 2. All of them 3. Two of them radiating from the top of the Adjust Angle button, and from the bottom of the <> button just below it. The white lines extended just part way across the image. I just went to look at the spreadsheet again, changing nothing, and now all the white lines are there. When I use the scroll bars, the lines change. Sometimes I get some extending down from random columns, sometimes some of the horizontal lines disappear. I did a Alt-End to put the PM_Start cell at the top of the screen, and then I did a Ctrl-Home. No white lines. Here are two images. (I'm not sure what kind of links are best. These should do.) https://i.imgur.com/BpDTDfa.jpg https://i.imgur.com/4d6vAsx.jpg -- You are receiving this mail because: You are the assignee for the bug.
