https://bugs.documentfoundation.org/show_bug.cgi?id=145237
Bug ID: 145237
Summary: custom shape uses wrong curve for fill in extrusion in
most cases
Product: LibreOffice
Version: Inherited From OOo
Hardware: x86-64 (AMD64)
OS: Windows (All)
Status: UNCONFIRMED
Severity: normal
Priority: medium
Component: LibreOffice
Assignee: [email protected]
Reporter: [email protected]
Created attachment 175849
--> https://bugs.documentfoundation.org/attachment.cgi?id=175849&action=edit
Example shapes to test fill and 3D color
Open attached document. It has examples for the problem.
The shape consists of two curves. On curve is for the arc with arrow head, the
other is for the fill area. If you enable 3D extrusion with the "Toggle
extrusion" icon some problems occur.
If the surface is set to "Wireframe", the extrusion is correct.
If the surface is set to "Matt" and the shape has a bitmap, pattern or gradient
as fill, then the 3D version does not use the sector for fill.
If the "Surface" is set to "Matt" and the shape has a hatch or color as fill,
then it depends of the setting for "3D color", whether extrusion is correct or
not. If the "3D Color" is set to "automatic", the extrusion uses correctly the
sector. If a color is explicitly set in "3D Color", then the extrusion is wrong
the same way as in the bitmap, pattern or gradient case.
[The setting "3D color" determines the color of the side faces. The setting
"Surface" should generate presets of material reflection properties, but only
"wireframe" and one other is implemented, so "Matt", "Plastic" and "Metal" do
all the same.]
--
You are receiving this mail because:
You are the assignee for the bug.
