cmake -DCMAKE_BUILD_TYPE=Coverage -DBUILD_TESTS=ON ../ && \ make && make coverage && sensible-browser ./coverage/index.html
Current stats for libs/lensfun: Line Coverage 56.0% 1963 / 3508 Functions 53.8% 147 / 273 Cmake module is from: https://github.com/bilke/cmake-modules/blob/master/CodeCoverage.cmake With one modification around lines 148-154 --- CMakeLists.txt | 5 + cmake/modules/CodeCoverage.cmake | 200 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 205 insertions(+) create mode 100644 cmake/modules/CodeCoverage.cmake diff --git a/CMakeLists.txt b/CMakeLists.txt index 8f28e87..3684249 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -254,3 +254,8 @@ IF(CPACK_BINARY_DEB) ENDIF(CPACK_BINARY_DEB) INCLUDE(CPack) + +if(CMAKE_BUILD_TYPE STREQUAL "Coverage" AND CMAKE_COMPILER_IS_GNUCXX) + include(CodeCoverage) + setup_target_for_coverage(coverage ctest coverage) +endif(CMAKE_BUILD_TYPE STREQUAL "Coverage" AND CMAKE_COMPILER_IS_GNUCXX) diff --git a/cmake/modules/CodeCoverage.cmake b/cmake/modules/CodeCoverage.cmake new file mode 100644 index 0000000..fdecdff --- /dev/null +++ b/cmake/modules/CodeCoverage.cmake @@ -0,0 +1,200 @@ +# Copyright (c) 2012 - 2015, Lars Bilke +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, +# are permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, this +# list of conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, +# this list of conditions and the following disclaimer in the documentation +# and/or other materials provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its contributors +# may be used to endorse or promote products derived from this software without +# specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# +# +# 2012-01-31, Lars Bilke +# - Enable Code Coverage +# +# 2013-09-17, Joakim Söderberg +# - Added support for Clang. +# - Some additional usage instructions. +# +# USAGE: + +# 0. (Mac only) If you use Xcode 5.1 make sure to patch geninfo as described here: +# http://stackoverflow.com/a/22404544/80480 +# +# 1. Copy this file into your cmake modules path. +# +# 2. Add the following line to your CMakeLists.txt: +# INCLUDE(CodeCoverage) +# +# 3. Set compiler flags to turn off optimization and enable coverage: +# SET(CMAKE_CXX_FLAGS "-g -O0 -fprofile-arcs -ftest-coverage") +# SET(CMAKE_C_FLAGS "-g -O0 -fprofile-arcs -ftest-coverage") +# +# 3. Use the function SETUP_TARGET_FOR_COVERAGE to create a custom make target +# which runs your test executable and produces a lcov code coverage report: +# Example: +# SETUP_TARGET_FOR_COVERAGE( +# my_coverage_target # Name for custom target. +# test_driver # Name of the test driver executable that runs the tests. +# # NOTE! This should always have a ZERO as exit code +# # otherwise the coverage generation will not complete. +# coverage # Name of output directory. +# ) +# +# 4. Build a Debug build: +# cmake -DCMAKE_BUILD_TYPE=Debug .. +# make +# make my_coverage_target +# +# + +# Check prereqs +FIND_PROGRAM( GCOV_PATH gcov ) +FIND_PROGRAM( LCOV_PATH lcov ) +FIND_PROGRAM( GENHTML_PATH genhtml ) +FIND_PROGRAM( GCOVR_PATH gcovr PATHS ${CMAKE_SOURCE_DIR}/tests) + +IF(NOT GCOV_PATH) + MESSAGE(FATAL_ERROR "gcov not found! Aborting...") +ENDIF() # NOT GCOV_PATH + +IF(NOT CMAKE_COMPILER_IS_GNUCXX) + # Clang version 3.0.0 and greater now supports gcov as well. + MESSAGE(WARNING "Compiler is not GNU gcc! Clang Version 3.0.0 and greater supports gcov as well, but older versions don't.") + + IF(NOT "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang") + MESSAGE(FATAL_ERROR "Compiler is not GNU gcc! Aborting...") + ENDIF() +ENDIF() # NOT CMAKE_COMPILER_IS_GNUCXX + +SET(CMAKE_CXX_FLAGS_COVERAGE + "-g -O0 --coverage -fprofile-arcs -ftest-coverage" + CACHE STRING "Flags used by the C++ compiler during coverage builds." + FORCE ) +SET(CMAKE_C_FLAGS_COVERAGE + "-g -O0 --coverage -fprofile-arcs -ftest-coverage" + CACHE STRING "Flags used by the C compiler during coverage builds." + FORCE ) +SET(CMAKE_EXE_LINKER_FLAGS_COVERAGE + "" + CACHE STRING "Flags used for linking binaries during coverage builds." + FORCE ) +SET(CMAKE_SHARED_LINKER_FLAGS_COVERAGE + "" + CACHE STRING "Flags used by the shared libraries linker during coverage builds." + FORCE ) +MARK_AS_ADVANCED( + CMAKE_CXX_FLAGS_COVERAGE + CMAKE_C_FLAGS_COVERAGE + CMAKE_EXE_LINKER_FLAGS_COVERAGE + CMAKE_SHARED_LINKER_FLAGS_COVERAGE ) + +IF ( NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR CMAKE_BUILD_TYPE STREQUAL "Coverage")) + MESSAGE( WARNING "Code coverage results with an optimized (non-Debug) build may be misleading" ) +ENDIF() # NOT CMAKE_BUILD_TYPE STREQUAL "Debug" + + +# Param _targetname The name of new the custom make target +# Param _testrunner The name of the target which runs the tests. +# MUST return ZERO always, even on errors. +# If not, no coverage report will be created! +# Param _outputname lcov output is generated as _outputname.info +# HTML report is generated in _outputname/index.html +# Optional fourth parameter is passed as arguments to _testrunner +# Pass them in list form, e.g.: "-j;2" for -j 2 +FUNCTION(SETUP_TARGET_FOR_COVERAGE _targetname _testrunner _outputname) + + IF(NOT LCOV_PATH) + MESSAGE(FATAL_ERROR "lcov not found! Aborting...") + ENDIF() # NOT LCOV_PATH + + IF(NOT GENHTML_PATH) + MESSAGE(FATAL_ERROR "genhtml not found! Aborting...") + ENDIF() # NOT GENHTML_PATH + + # Setup target + ADD_CUSTOM_TARGET(${_targetname} + + # Cleanup lcov + ${LCOV_PATH} --directory . --zerocounters + + # Run tests + COMMAND ${_testrunner} ${ARGV3} + + # Capturing lcov counters and generating report + COMMAND ${LCOV_PATH} --no-external --directory ${CMAKE_SOURCE_DIR} --capture --output-file ${_outputname}.info + COMMAND ${GENHTML_PATH} -o ${_outputname} ${_outputname}.info + COMMAND ${CMAKE_COMMAND} -E remove ${_outputname}.info + + # normally, this should be done, but for me it fails with + # negative counts found in tracefile coverage.info + # Roman, 2016-07-12 + + #COMMAND ${LCOV_PATH} --remove ${_outputname}.info 'tests/*' '/usr/*' --output-file ${_outputname}.info.cleaned + #COMMAND ${GENHTML_PATH} -o ${_outputname} ${_outputname}.info.cleaned + #COMMAND ${CMAKE_COMMAND} -E remove ${_outputname}.info ${_outputname}.info.cleaned + + WORKING_DIRECTORY ${CMAKE_BINARY_DIR} + COMMENT "Resetting code coverage counters to zero.\nProcessing code coverage counters and generating report." + ) + + # Show info where to find the report + ADD_CUSTOM_COMMAND(TARGET ${_targetname} POST_BUILD + COMMAND ; + COMMENT "Open ./${_outputname}/index.html in your browser to view the coverage report." + ) + +ENDFUNCTION() # SETUP_TARGET_FOR_COVERAGE + +# Param _targetname The name of new the custom make target +# Param _testrunner The name of the target which runs the tests +# Param _outputname cobertura output is generated as _outputname.xml +# Optional fourth parameter is passed as arguments to _testrunner +# Pass them in list form, e.g.: "-j;2" for -j 2 +FUNCTION(SETUP_TARGET_FOR_COVERAGE_COBERTURA _targetname _testrunner _outputname) + + IF(NOT PYTHON_EXECUTABLE) + MESSAGE(FATAL_ERROR "Python not found! Aborting...") + ENDIF() # NOT PYTHON_EXECUTABLE + + IF(NOT GCOVR_PATH) + MESSAGE(FATAL_ERROR "gcovr not found! Aborting...") + ENDIF() # NOT GCOVR_PATH + + ADD_CUSTOM_TARGET(${_targetname} + + # Run tests + ${_testrunner} ${ARGV3} + + # Running gcovr + COMMAND ${GCOVR_PATH} -x -r ${CMAKE_SOURCE_DIR} -e '${CMAKE_SOURCE_DIR}/tests/' -o ${_outputname}.xml + WORKING_DIRECTORY ${CMAKE_BINARY_DIR} + COMMENT "Running gcovr to produce Cobertura code coverage report." + ) + + # Show info where to find the report + ADD_CUSTOM_COMMAND(TARGET ${_targetname} POST_BUILD + COMMAND ; + COMMENT "Cobertura code coverage report saved in ${_outputname}.xml." + ) + +ENDFUNCTION() # SETUP_TARGET_FOR_COVERAGE_COBERTURA -- 2.8.1 ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.http://sdm.link/zohodev2dev _______________________________________________ Lensfun-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/lensfun-users
