Dimitri John Ledkov has proposed merging ~xnox/ubuntu-manual-tests:riscv64-tests into ubuntu-manual-tests:master.
Commit message: 1735 & 1737 tests are for the Unleashed image 1736 & 1737 tests are for the Unmatched image Requested reviews: Ubuntu Testcase Admins (ubuntu-testcase) For more details, see: https://code.launchpad.net/~xnox/ubuntu-manual-tests/+git/ubuntu-manual-tests/+merge/401604 -- Your team Ubuntu Testcase Admins is requested to review the proposed merge of ~xnox/ubuntu-manual-tests:riscv64-tests into ubuntu-manual-tests:master.
diff --git a/testcases/image/1735_Install Unleashed b/testcases/image/1735_Install Unleashed new file mode 100755 index 0000000..556fe1f --- /dev/null +++ b/testcases/image/1735_Install Unleashed @@ -0,0 +1,37 @@ +The scope of this test is to ensure that riscv64+unleashed image boots from SD card on SiFive Hifive Unleashed board + +<dl> + <dt>Flash downloaded image onto SD card</dt> + <dd>You can use Gnome Disks app to restore img.xz onto the SD card</dd> + <dd> Alternatively you can use xz -d to decompress, and then dd to copy the image to the SD card</dd> + <dt>Connect networking, serial console to the board</dt> + <dd>Ethernet cable for networking</dd> + <dd>MicroUSB cable for serial console</dd> + <dt>Check the board switches to ensure they are in sdcard mode</dt> + <dd>MSEL=1011 (MSEL2 to the outside of the board, the rest to the inside)</dd> + <dt>Connect to the serial console</dt> + <dd>sudo screen /dev/ttyUSB1 115200</dd> + <dt>Power on the board</dt> + <dd>You should see U-BOOT menu</dd> + <dd>It should then boot default entry after a delay</dd> + <dd>After a while cloud-init will run</dd> + <dd>Then serial login will appear, but will not work</dd> + <dd>Then cloud-init will finally finish (~250s)</dd> + <dd>Then one will be able to login</dd> + <dt>Login and change password</dt> + <dd>Login using ubuntu for both username and password</dd> + <dd>Reenter ubuntu password again</dd> + <dd>Set new password</dd> + <dd>Confirm the new password</dd> + <dt>Perform generic testing</dt> + <dd>Check that apt update works</dd> + <dd>Run any command that is not installed, check that command-not-found recommends things to install</dd> + <dd>I.e. hello</dd> + <dd>Install a package and check that it works, i.e. hello</dd> + <dt>Poweroff</dt> + <dd>Console messages should reach poweroff target</dd> + <dd>There should be final kernel dmsg powering off</dd> + <dd>Manually turn power-off from the board</dd> +</dl> +<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result. + If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong> diff --git a/testcases/image/1736_Install Unmatched b/testcases/image/1736_Install Unmatched new file mode 100755 index 0000000..3bfdca9 --- /dev/null +++ b/testcases/image/1736_Install Unmatched @@ -0,0 +1,37 @@ +The scope of this test is to ensure that riscv64+unmatched image boots from SD card on SiFive Hifive Unmatched board + +<dl> + <dt>Flash downloaded image onto SD card</dt> + <dd>You can use Gnome Disks app to restore img.xz onto the SD card</dd> + <dd> Alternatively you can use xz -d to decompress, and then dd to copy the image to the SD card</dd> + <dt>Connect networking, serial console to the board</dt> + <dd>Ethernet cable for networking</dd> + <dd>MicroUSB cable for serial console</dd> + <dt>Check the board switches to ensure they are in sdcard mode</dt> + <dd>MSEL2 to the inside of the board, the rest to the outside</dd> + <dt>Connect to the serial console</dt> + <dd>sudo screen /dev/ttyUSB1 115200</dd> + <dt>Power on the board</dt> + <dd>You should see U-BOOT menu</dd> + <dd>It should then boot default entry after a delay</dd> + <dd>After a while cloud-init will run</dd> + <dd>Then serial login will appear, but will not work</dd> + <dd>Then cloud-init will finally finish (~250s)</dd> + <dd>Then one will be able to login</dd> + <dt>Login and change password</dt> + <dd>Login using ubuntu for both username and password</dd> + <dd>Reenter ubuntu password again</dd> + <dd>Set new password</dd> + <dd>Confirm the new password</dd> + <dt>Perform generic testing</dt> + <dd>Check that apt update works</dd> + <dd>Run any command that is not installed, check that command-not-found recommends things to install</dd> + <dd>I.e. hello</dd> + <dd>Install a package and check that it works, i.e. hello</dd> + <dt>Poweroff</dt> + <dd>Console messages should reach poweroff target</dd> + <dd>There should be final kernel dmsg powering off</dd> + <dd>Manually turn power-off from the board</dd> +</dl> +<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result. + If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong> diff --git a/testcases/image/1737_Install Qemu b/testcases/image/1737_Install Qemu new file mode 100755 index 0000000..c0af34a --- /dev/null +++ b/testcases/image/1737_Install Qemu @@ -0,0 +1,22 @@ +The scope of this test is to ensure that riscv64+unleashed and riscv64+unmatched images boot in qemu. + +<dl> + <dt>Boot with qemu</dt> + <dd>Follow instructions from <a href="https://wiki.ubuntu.com/RISC-V";>wiki</a> on how to boot with QEMU</dd> + <dt>Login and change password</dt> + <dd>Login using ubuntu for both username and password</dd> + <dd>Reenter ubuntu password again</dd> + <dd>Set new password</dd> + <dd>Confirm the new password</dd> + <dt>Perform generic testing</dt> + <dd>Check that apt update works</dd> + <dd>Run any command that is not installed, check that command-not-found recommends things to install</dd> + <dd>I.e. hello</dd> + <dd>Install a package and check that it works, i.e. hello</dd> + <dt>Poweroff</dt> + <dd>Console messages should reach poweroff target</dd> + <dd>There should be final kernel dmsg powering off</dd> + <dd>Press "CTRL+a c" and type quit</dd> +</dl> +<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result. + If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
-- Mailing list: https://launchpad.net/~kubuntu-council Post to : [email protected] Unsubscribe : https://launchpad.net/~kubuntu-council More help : https://help.launchpad.net/ListHelp
