From: Hans de Goede <[email protected]>

media: ov08x40: Fix value of reset GPIO when requesting it

Upstream-status: Landed in media-committers/next

We should put/leave the sensor in reset when requesting the GPIO, after
requesting it there are 2 possible scenarios and having the GPIO driven
low is no good in either scenario:

1. The sensor was in ACPI D0 before probe() runs, in this case
   ov08x40_power_on() + ov08x40_identify_module() will run immediately
   after requesting the GPIO and ov08x40_power_on() starts with driving
   the GPIO high. So if the GPIO was already high it will very shortly
   be driven low, more of a spike to low then actually properly be driven
   low. Which may leave the sensor in a confused state.

   If we request the GPIO to be high at request time then power_on() will
   driver it high again (no-op) and then sleep for 1-2 ms, so no spike.

2. The sensor was in ACPI D3 / off before probe(), in this case probe()
   leaves the sensor alone. But when the sensor is off its reset line
   should be driven high not low.

Signed-off-by: Hans de Goede <[email protected]>

diff --git a/drivers/media/i2c/ov08x40.c b/drivers/media/i2c/ov08x40.c
index blahblah..blahblah 100644
--- a/drivers/media/i2c/ov08x40.c
+++ b/drivers/media/i2c/ov08x40.c
@@ -2167,7 +2167,7 @@ static int ov08x40_check_hwcfg(struct ov08x40 *ov08x, 
struct device *dev)
                return dev_err_probe(dev, ret, "parsing endpoint failed\n");
 
        ov08x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
-                                                   GPIOD_OUT_LOW);
+                                                   GPIOD_OUT_HIGH);
        if (IS_ERR(ov08x->reset_gpio)) {
                ret = dev_err_probe(dev, PTR_ERR(ov08x->reset_gpio),
                                    "getting reset GPIO\n");

--
https://gitlab.com/cki-project/kernel-ark/-/merge_requests/3726

-- 
_______________________________________________
kernel mailing list -- [email protected]
To unsubscribe send an email to [email protected]
Fedora Code of Conduct: 
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: 
https://lists.fedoraproject.org/archives/list/[email protected]
Do not reply to spam, report it: 
https://pagure.io/fedora-infrastructure/new_issue

Reply via email to