This bug was fixed in the package linux-oem-6.11 - 6.11.0-1023.23
---------------
linux-oem-6.11 (6.11.0-1023.23) noble; urgency=medium
* noble/linux-oem-6.11: 6.11.0-1023.23 -proposed tracker (LP:
#2111230)
* ACPICA: Add support for printing AML arguments when trace point enabled
(LP: #2111220)
- ACPICA: Add support for printing AML arguments when trace point enabled
* When the speaker volume is adjusted above 80%, noise occurs from the
speakers with cs42l43. (LP: #2110950)
- ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
* Support Sony IMX471 camera sensor for Intel IPU7 platforms (LP: #2107320)
- SAUCE: media: ipu-bridge: Support imx471 sensor
- [Packaging] debian.oem/dkms-versions -- bump ipu6-drivers version
* Mediatek MT7920 WLAN card does not respect Wireless Radio Control in BIOS
(LP: #2109314)
- wifi: mt76: mt7921: add rfkill_poll for hardware rfkill
* The system with VMD enabled may encounter hang (LP: #2110178)
- SAUCE: PCI: vmd: Fix use-after-free bug in resource name assignment
* Fix divide by zero errors in DML2 (LP: #2106923)
- drm/amd/display: Protect FPU in dml2_init()/dml21_init()
- drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()
- drm/amd/display: Protect FPU in dml21_copy()
* Not all monitors connected on the dock display correctly when the system
resumes from restart or suspend on AMD platform (LP: #2110095)
- drm/amd/display: use drm_warn instead of DRM_WARN
- drm/amd/display: Shift DMUB AUX reply command if necessary
- drm/amd/display: Fix the checking condition in dmub aux handling
- drm/amd/display: Remove incorrect checking in dmub aux handler
- drm/amd/display: Copy AUX read reply data whenever length > 0
- drm/amd/display: Fix wrong handling for AUX_DEFER case
* Support AMD Image Signal Processing (ISP) unit V4.0 (LP: #2110092)
- Revert "UBUNTU: [Config] Enable AMD_ISP4"
- Revert "UBUNTU: SAUCE: ispkernel 3.0 release"
- drm/amdgpu: Add MFD support for ISP I2C bus
- drm/amd/amdgpu: Add support for isp buffers
- SAUCE: ispkernel: 4.0 release
- SAUCE: fix amd-isp4 build failures
- [Config] Enable AMD_ISP4
* System will restart while resuming with SATA HDD or nvme installed with
password set (LP: #2110090)
- PCI: Explicitly put devices into D0 when initializing
* Privacy LED may not be turned on on OEM Renegade platform with Intel IPU7
camera (LP: #2106807)
- [Packaging] debian.oem/dkms-versions -- bump vision-drivers version
* Fix volume control no effect on HP EliteStudio AIO (LP: #2109539)
- ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO
* Fix Mic Mute LED no function on HP G12 laptops with ACP7.0 platform
(LP: #2108954)
- ASoC: amd: acp: Remove redundant acp70 chip->name
- ASoC: amd: acp: Implement acp_common_hw_ops support for acp platforms
- ASoC: amd: acp: Refactor dmic-codec platform device creation
-- Chia-Lin Kao (AceLan) <acelan....@canonical.com> Mon, 19 May 2025
14:27:43 +0800
** Changed in: linux-oem-6.11 (Ubuntu Noble)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/2109539
Title:
Fix volume control no effect on HP EliteStudio AIO
Status in HWE Next:
New
Status in linux package in Ubuntu:
New
Status in linux-oem-6.11 package in Ubuntu:
New
Status in linux source package in Noble:
New
Status in linux-oem-6.11 source package in Noble:
Fix Released
Status in linux source package in Plucky:
New
Status in linux-oem-6.11 source package in Plucky:
New
Bug description:
[Impact]
The volume level changes on HP EliteStudio AIO with audio codec RTK ALC274
doesn't seem to take any effect. The volume stays the same no matter what we
configure the volume level.
[Fix]
This hardware has ALC274 codec with speaker NID 0x17 and line out NID 0x16
for audio output. The line out is routed correctly but the speaker is not. This
fix correct the route between speaker and the corresponding DAC.
[Test Case]
1. Boot and log into the HP EliteStudio AIO.
2. Go to the sound settings in g-c-c
3. Make sure the audio output device is internal speaker and start playing
audio.
4. Adjust the volume from the sound settings and check the volume level by
ear.
[Where problems could occur]
The patch only apply on two particular SSIDs of the particular HP model. The
risk of regression is low.
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/2109539/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
