[Expired for linux-raspi (Ubuntu) because there has been no activity for
60 days.]

** Changed in: linux-raspi (Ubuntu)
       Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-raspi in Ubuntu.
https://bugs.launchpad.net/bugs/2093789

Title:
  can't use external USB nvme disk with raspberrypi 4b on ubuntu 24.04
  arm64

Status in linux-raspi package in Ubuntu:
  Expired

Bug description:
  I connected an external usb NVME disk to one of the usb-3 ports on a
  raspi 4b. The disk can't be used and dmesg says:

  [snipped]
  [   47.309485] ieee80211 phy0: brcmf_p2p_send_action_frame: Unknown Frame: 
category 0xa, action 0x8
  [  137.048321] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
  [  137.061597] usb 2-1: New USB device found, idVendor=152d, idProduct=a583, 
bcdDevice= 2.12
  [  137.061626] usb 2-1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
  [  137.061643] usb 2-1: Product: SSK Storage
  [  137.061657] usb 2-1: Manufacturer: SSK
  [  137.061670] usb 2-1: SerialNumber: DD56419883935
  [  137.115735] usbcore: registered new interface driver usb-storage
  [  137.147001] scsi host0: uas
  [  137.147413] usbcore: registered new interface driver uas
  [  137.148288] scsi 0:0:0:0: Direct-Access     SSK                       0212 
PQ: 0 ANSI: 6
  [  137.151653] sd 0:0:0:0: Attached scsi generic sg0 type 0
  [  147.151762] sd 0:0:0:0: [sda] Spinning up disk...
  [  150.181132] ...............not responding...
  [  285.675782] sd 0:0:0:0: [sda] Read Capacity(16) failed: Result: 
hostbyte=DID_ERROR driverbyte=DRIVER_OK
  [  285.675821] sd 0:0:0:0: [sda] Sense Key : Not Ready [current] 
  [  285.675841] sd 0:0:0:0: [sda] Add. Sense: Logical unit is in process of 
becoming ready
  [  322.115261] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: 
hostbyte=DID_ERROR driverbyte=DRIVER_OK
  [  322.115286] sd 0:0:0:0: [sda] Sense Key : Not Ready [current] 
  [  322.115295] sd 0:0:0:0: [sda] Add. Sense: Logical unit is in process of 
becoming ready
  [  334.270846] sd 0:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
  [  334.270882] sd 0:0:0:0: [sda] 0-byte physical blocks
  [  369.638288] INFO: task (udev-worker):1127 blocked for more than 122 
seconds.
  [  369.645581]       Tainted: G         C  E      6.8.0-1017-raspi #19-Ubuntu
  [  369.652674] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables 
this message.
  [  369.660653] task:(udev-worker)   state:D stack:0     pid:1127  tgid:1127  
ppid:400    flags:0x0000080d
  [  369.660672] Call trace:
  [  369.660677]  __switch_to+0xb8/0xd8
  [  369.660694]  __schedule+0x2f0/0x860
  [  369.660703]  schedule+0x3c/0x138
  [  369.660711]  async_synchronize_cookie_domain+0xe8/0x158
  [  369.660720]  async_synchronize_full+0x20/0x38
  [  369.660726]  do_init_module+0x1e8/0x260
  [  369.660736]  load_module+0x790/0x8c8
  [  369.660745]  init_module_from_file+0x94/0xf8
  [  369.660753]  idempotent_init_module+0x1d4/0x2e8
  [  369.660762]  __arm64_sys_finit_module+0x6c/0xd8
  [  369.660772]  invoke_syscall+0x50/0x128
  [  369.660779]  el0_svc_common.constprop.0+0xc8/0xf0
  [  369.660786]  do_el0_svc+0x24/0x38
  [  369.660792]  el0_svc+0x48/0x178
  [  369.660799]  el0t_64_sync_handler+0x120/0x130
  [  369.660806]  el0t_64_sync+0x1a8/0x1b0
  [  370.663369] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
  [  382.756788] sd 0:0:0:0: [sda] Asking for cache data failed
  [  382.762496] sd 0:0:0:0: [sda] Assuming drive cache: write through
  [  407.064847] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes not a 
multiple of physical block size (0 bytes)
  [  407.064882] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a 
multiple of physical block size (0 bytes)
  [  407.066417] sd 0:0:0:0: [sda] Attached SCSI disk

  ProblemType: Bug
  DistroRelease: Ubuntu 24.04
  Package: linux-image-raspi 6.8.0-1017.19
  ProcVersionSignature: Ubuntu 6.8.0-1017.19-raspi 6.8.12
  Uname: Linux 6.8.0-1017-raspi aarch64
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 
k6.8.0-1017-raspi.
  AplayDevices: Error: [Errno 2] No such file or directory: 'aplay'
  ApportVersion: 2.28.1-0ubuntu3.3
  Architecture: arm64
  ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord'
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/timer', 
'/dev/snd/seq', '/dev/snd/pcmC0D0p', '/dev/snd/controlC0', '/dev/snd/by-path', 
'/dev/snd/pcmC1D0p', '/dev/snd/controlC1', '/dev/snd/pcmC2D0p', 
'/dev/snd/controlC2'] failed with exit code 1:
  CRDA: N/A
  Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer'
  Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer'
  Card1.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer'
  Card1.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer'
  Card2.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer'
  Card2.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer'
  CasperMD5CheckResult: unknown
  CloudArchitecture: aarch64
  CloudID: nocloud
  CloudName: unknown
  CloudPlatform: nocloud
  CloudSubPlatform: config-disk (/dev/mmcblk0p1)
  Date: Fri Jan 10 22:21:17 2025
  IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig'
  Lspci-vt: -[0000:00]---00.0-[01]----00.0  VIA Technologies, Inc. VL805/806 
xHCI USB 3.0 Controller
  Lsusb:
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 002 Device 002: ID 152d:a583 JMicron Technology Corp. / JMicron USA 
Technology Corp. SSK Storage
   Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Lsusb-t:
   /:  Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/1p, 480M
       |__ Port 001: Dev 002, If 0, Class=Hub, Driver=hub/4p, 480M
   /:  Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/4p, 5000M
       |__ Port 001: Dev 002, If 0, Class=Mass Storage, Driver=uas, 5000M
   /:  Bus 003.Port 001: Dev 001, Class=root_hub, Driver=dwc2/1p, 480M
  PciMultimedia:
   
  ProcEnviron:
   LANG=C.UTF-8
   PATH=(custom, no user)
   SHELL=/bin/bash
   TERM=tmux-256color
  ProcFB:
   
  ProcKernelCmdLine: coherent_pool=1M 8250.nr_uarts=1 
snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 
snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  
smsc95xx.macaddr=DC:A6:32:81:C4:EB vc_mem.mem_base=0x3ec00000 
vc_mem.mem_size=0x40000000  console=ttyS0,115200 multipath=off 
dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 rootwait 
fixrtc cfg80211.ieee80211_regdom=GB
  RelatedPackageVersions:
   linux-restricted-modules-6.8.0-1017-raspi N/A
   linux-backports-modules-6.8.0-1017-raspi  N/A
   linux-firmware                            20240318.git3b128b60-0ubuntu2.6
  RfKill: Error: [Errno 2] No such file or directory: 'rfkill'
  SourcePackage: linux-raspi
  StagingDrivers: bcm2835_mmal_vchiq bcm2835_v4l2 bcm2835_isp bcm2835_codec 
vc_sm_cma rpivid_hevc snd_bcm2835
  UpgradeStatus: No upgrade log present (probably fresh install)
  acpidump:

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/2093789/+subscriptions


-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to     : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to