After removing marvell-card (now SiI 3132, sata_sil24 module) this error and various other problems (e.g. "gpu has fallen of the bus", early freezes, nic sometimes not available) are gone. Looks like an incompatibility between marvell and board [Asrock A770DE+]).
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/550559 Title: hdd problems, failed command: READ FPDMA QUEUED Status in “linux” package in Ubuntu: Invalid Bug description: Hello! I have a brand new computer. With a SSD device and a SATA hard drive, a Seagate Barracuda XT specifically 6Gb / s of 2TB. The latter is connected to a Marvell 9123 controller that I set AHCI mode in BIOS. I have the OS installed on the SSD device, but when you try to read the disc 2TB gives several bugs. I tried to change the disk to another controller and gives the same problem, I even removed the disk partition table, having the same fate. I checked the disc for flaws from Windows with hd tune and verification tool official record, and does not give me any errors. I have tested with kernel version 2.6.34-rc2 and it works properly with this disc. The errors given are the following: [ 9.115544] ata9: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x10 frozen [ 9.115550] ata9.00: failed command: READ FPDMA QUEUED [ 9.115556] ata9.00: cmd 60/04:00:d4:82:85/00:00:1f:00:00/40 tag 0 ncq 2048 in [ 9.115557] res 40/00:18:d3:82:85/00:00:1f:00:00/40 Emask 0x4 (timeout) [ 9.115560] ata9.00: status: { DRDY } [ 9.115562] ata9.00: failed command: READ FPDMA QUEUED [ 9.115568] ata9.00: cmd 60/01:08:d1:82:85/00:00:1f:00:00/40 tag 1 ncq 512 in [ 9.115569] res 40/00:18:d3:82:85/00:00:1f:00:00/40 Emask 0x4 (timeout) [ 9.115572] ata9.00: status: { DRDY } [ 9.115574] ata9.00: failed command: READ FPDMA QUEUED [ 9.115579] ata9.00: cmd 60/01:10:d2:82:85/00:00:1f:00:00/40 tag 2 ncq 512 in [ 9.115581] res 40/00:18:d3:82:85/00:00:1f:00:00/40 Emask 0x4 (timeout) [ 9.115583] ata9.00: status: { DRDY } [ 9.115586] ata9.00: failed command: READ FPDMA QUEUED [ 9.115591] ata9.00: cmd 60/01:18:d3:82:85/00:00:1f:00:00/40 tag 3 ncq 512 in [ 9.115592] res 40/00:18:d3:82:85/00:00:1f:00:00/40 Emask 0x4 (timeout) [ 9.115595] ata9.00: status: { DRDY } [ 9.115609] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9.115612] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 9.115616] Descriptor sense data with sense descriptors (in hex): [ 9.115618] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 9.115626] 1f 85 82 d3 [ 9.115629] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 9.115633] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 1f 85 82 d4 00 00 04 00 [ 9.115640] end_request: I/O error, dev sdb, sector 528843476 [ 9.115643] __ratelimit: 18 callbacks suppressed [ 9.115646] Buffer I/O error on device sdb2, logical block 317299556 [ 9.115649] Buffer I/O error on device sdb2, logical block 317299557 [ 9.115652] Buffer I/O error on device sdb2, logical block 317299558 [ 9.115655] Buffer I/O error on device sdb2, logical block 317299559 [ 9.115671] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9.115674] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 9.115678] Descriptor sense data with sense descriptors (in hex): [ 9.115679] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 9.115687] 1f 85 82 d3 [ 9.115690] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 9.115693] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 1f 85 82 d1 00 00 01 00 [ 9.115700] end_request: I/O error, dev sdb, sector 528843473 [ 9.115702] Buffer I/O error on device sdb2, logical block 317299553 [ 9.115707] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9.115710] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 9.115714] Descriptor sense data with sense descriptors (in hex): [ 9.115716] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 9.115723] 1f 85 82 d3 [ 9.115726] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 9.115729] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 1f 85 82 d2 00 00 01 00 [ 9.115736] end_request: I/O error, dev sdb, sector 528843474 [ 9.115738] Buffer I/O error on device sdb2, logical block 317299554 [ 9.115743] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9.115746] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 9.115749] Descriptor sense data with sense descriptors (in hex): [ 9.115751] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 9.115759] 1f 85 82 d3 [ 9.115762] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 9.115765] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 1f 85 82 d3 00 00 01 00 [ 9.115771] end_request: I/O error, dev sdb, sector 528843475 [ 9.115774] Buffer I/O error on device sdb2, logical block 317299555 [ 16.243531] sd 8:0:0:0: timing out command, waited 7s [ 23.241557] sd 8:0:0:0: timing out command, waited 7s lsb_release -rd Description: Ubuntu lucid (development branch) Release: 10.04 ignasi@ignasi-desktop:~$ ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: yelp 2.29.5-0ubuntu3 ProcVersionSignature: Ubuntu 2.6.32-17.26-generic 2.6.32.10+drm33.1 Uname: Linux 2.6.32-17-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 Date: Mon Mar 29 01:06:27 2010 ExecutablePath: /usr/bin/yelp InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Beta amd64 (20100318) ProcEnviron: LANG=ca_ES.utf8 SHELL=/bin/bash SourcePackage: yelp To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/550559/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
