As the log below shows grub_net_fini_hw() is called before entering the kernel and before the LoadFile2 protocol is executed:
loader/efi/linux.c:478: kernel @ 0xf63d8000 net/net.c:1559: fs_close() name: /casper/vmlinuz net/net.c:1510: fs_open() name: /casper/initrd loader/efi/linux.c:396: LoadFile2 initrd loading protocol installed net/net.c:1819: grub_net_fini_hw() net/drivers/efi/efinet.c:232: efi_net close_card loader/efi/linux.c:141: Installed/updated FDT configuration table @ 0x0 loader/efi/linux.c:191: linux command line: 'BOOT_IMAGE=/casper/vmlinuz efi=debug earlyprintk url=https://cdimage.ubuntu.com/ubuntu-server/daily-live/current/jammy-live-serv er-arm64.iso' loader/efi/peimage.c:215: PE-COFF header checked loader/efi/peimage.c:282: sections loaded loader/efi/peimage.c:493: no relocations loader/efi/peimage.c:709: Executing image loaded at 0xf3640000 Entry point 0xf55473c8 Size 0x02d90000 EFI stub: Booting Linux Kernel... EFI stub: EFI_RNG_PROTOCOL unavailable EFI stub: Generating empty DTB loader/efi/linux.c:348: Providing initrd via LOAD_FILE2_PROTOCOL net/net.c:1685: fs_read_real() name: /casper/initrd net/drivers/efi/efinet.c:169: efi_net open_card net/drivers/efi/efinet.c:75: Timeout: limit_time 50680, new_time 50681 error: couldn't send network packet. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1967562 Title: jammy beta (220330) arm iso pxe boot kernel panic on Ampere Mt. Jade Status in grub2 package in Ubuntu: New Status in grub2-signed package in Ubuntu: New Status in linux package in Ubuntu: Incomplete Status in subiquity package in Ubuntu: Invalid Bug description: = Description = Platforms: Ampere Mt. Jade Altra (bizzy), Cavium thunderX crb2s (recht) Image: Jammy Beta (220330) I setup my pxe server to provision jammy beta and got the following kernel panic message after grub stage: log from console log [ 1.176614] integrity: Couldn't parse dbx signatures: -74^M [ 1.371630] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)^M [ 1.379891] CPU: 42 PID: 1 Comm: swapper/0 Not tainted 5.15.0-23-generic #23-Ubuntu^M [ 1.387535] Hardware name: WIWYNN Mt.Jade Server System B81.030Z1.0007/Mt.Jade Motherboard, BIOS 1.6.20210526 (SCP: 1.06.20210526) 2021/05/26^M [ 1.400215] Call trace:^M [ 1.402649] dump_backtrace+0x0/0x1ec^M [ 1.406310] show_stack+0x24/0x30^M [ 1.409614] dump_stack_lvl+0x68/0x84^M [ 1.413271] dump_stack+0x18/0x34^M [ 1.416573] panic+0x18c/0x39c^M [ 1.419616] mount_block_root+0x160/0x210^M [ 1.423622] mount_root+0x12c/0x14c^M [ 1.427097] prepare_namespace+0x140/0x1a0^M [ 1.431182] kernel_init_freeable+0x1c8/0x214^M [ 1.435527] kernel_init+0x30/0x160^M [ 1.439006] ret_from_fork+0x10/0x20^M [ 1.442573] SMP: stopping secondary CPUs^M [ 1.447323] Kernel Offset: 0x55263ee90000 from 0xffff800008000000^M [ 1.453404] PHYS_OFFSET: 0x80000000^M [ 1.456879] CPU features: 0x000085c1,a3302e42^M [ 1.461225] Memory Limit: none^M [ 1.464271] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---^M = Steps to Reproduce = 1. Followed this guide to setup the pxe server https://discourse.ubuntu.com/t/netbooting-the-live-server-installer-via-uefi-pxe-on-arm-aarch64-arm64-and-x86-64-amd64/19240 with the jammy beta image (220330) http://cdimage.ubuntu.com/ubuntu-server/daily-live/20220330/jammy-live-server-arm64.iso 1-1. You may use this script to perform the set-up https://github.com/tai271828/ubuntu-autoinstall-pxe-server by invoking: `sudo ./setup-pxe-server.sh --url http://cdimage.ubuntu.com/ubuntu-server/daily-live/20220330/jammy-live-server-arm64.iso` 2. Boot the system via PXE 3. Select Ubuntu at Grub menu = Expected Result = The image is loaded to the system locally via PXE, and subiquity is launched = Actual Result = Console log simply shows nothing for 10 seconds and then the kernel panic shows up. = Additional Information = - If we install via the virtual CD of the server, subiquity could be launched and the installation process completes successfully. - MAAS could deploy Jammy to the Mt. Jade server as well. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1967562/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
