Hello You-Sheng, or anyone else affected, Accepted linux-firmware into focal-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/linux- firmware/1.187.27 in a few hours, and then in the -proposed repository.
Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- focal to verification-done-focal. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-focal. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.14 in Ubuntu. https://bugs.launchpad.net/bugs/1954938 Title: Include the QCA WCN 6856 v2.1 support Status in HWE Next: New Status in linux package in Ubuntu: Fix Committed Status in linux-firmware package in Ubuntu: Fix Released Status in linux-oem-5.14 package in Ubuntu: Invalid Status in linux source package in Focal: Invalid Status in linux-firmware source package in Focal: Fix Committed Status in linux-oem-5.14 source package in Focal: Fix Committed Status in linux source package in Impish: Won't Fix Status in linux-firmware source package in Impish: Won't Fix Status in linux-oem-5.14 source package in Impish: Invalid Status in linux source package in Jammy: Fix Committed Status in linux-firmware source package in Jammy: Fix Released Status in linux-oem-5.14 source package in Jammy: Invalid Bug description: [SRU Justification] [Impact] WCN685x hw2.1 takes additional/updated firmware for both WiFi and Bluetooth function. ath11k_pci 0000:71:00.0: BAR 0: assigned [mem 0xa6000000-0xa61fffff 64bit] ath11k_pci 0000:71:00.0: enabling device (0000 -> 0002) ath11k_pci 0000:71:00.0: Unsupported WCN6855 SOC hardware version: 18 17 ath11k_pci: probe of 0000:71:00.0 failed with error -95 [Fix] WCN685x hw2.1 currently shares most WiFi firmware with hw2.0 except for the directory path and a board-2.bin. For Bluetooth, updated revision of qca/nvm_usb_00130201_gf* from mainline are neccessary for Focal. Jammy has all of them already. For kernel, many of the prerequisite works have been committed for hw2.0 in bug 1945154, 1952215 and 1958850. Currently, while WiFi 6G will be turned off for the lack of userspace support, the only fix necessary is to correct read mask of version info register. ath11k 6G band lives in mainline v5.16 and was backported to oem-5.14 in bug 1939528, so only oem-5.14 has to be reverted. [Test Case] WiFi and Bluetooth devices should be up and running, pass basic operations. $ lspci -nnk|grep -A3 Network 0000:71:00.0 Network controller [0280]: Qualcomm Device [17cb:1103] (rev 01) Subsystem: Foxconn International, Inc. Device [105b:e0ce] Kernel driver in use: ath11k_pci Kernel modules: ath11k_pci $ lsusb Bus 003 Device 004: ID 0489:e0e3 Foxconn / Hon Hai [Where problems could occur] At the time being, WCN685x WiFi 6G support will be turnef off deliberately due to the lack of full support in the userspace management tools. [Other Info] While this is a new hardware model from OEM program, it's only nominated for Focal oem-5.14 kernel and the coming LTS Jammy. ========== original bug report ========== ath11k_pci 0000:71:00.0: BAR 0: assigned [mem 0xa6000000-0xa61fffff 64bit] ath11k_pci 0000:71:00.0: enabling device (0000 -> 0002) ath11k_pci 0000:71:00.0: Unsupported WCN6855 SOC hardware version: 18 17 ath11k_pci: probe of 0000:71:00.0 failed with error -95 $ lspci -nnk|grep -A3 Network 0000:71:00.0 Network controller [0280]: Qualcomm Device [17cb:1103] (rev 01) Subsystem: Foxconn International, Inc. Device [105b:e0ce] Kernel driver in use: ath11k_pci Kernel modules: ath11k_pci $ lsusb Bus 003 Device 004: ID 0489:e0e3 Foxconn / Hon Hai To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1954938/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
